⚠︎ Brother OneHitDone Gone VERTICAL ⇪
- Thread starter OneHitDone
- Start date
hybridway2
Amare Shill
Right! He's the only grower i see running nft. I gotta give you some serious credit OHD.
You've eliminated the unneeded nutes that when laying around can be dangerous to a well planned feeding schedule. Especially when i personally am stoned AF n see over a $G worth of worthless to me nutes laying around to complicate matters.
Got the NFT working Perfectly & still make time to run tests & help my ass. Haha!
Good man this OHD is.
Having a real hard time following through with the tossing of the nutes.
Once i know what's what i will.
The GH vs Jacks Veg run using your recommended recipe for GH is going well. So well in fact that its going to be nearly impossible to choose.
Will be posting updates on that soon. Guess the decision will come down to the roots, n we'll know this wk during transplant.
Thanks brother OHD for the help in battling my LedDefficiency too.
Hoping that FB is a hit for you. Perfect for that NFT design as its a super stretcher & may even need x3 netts. Will produce nice spear shaped tops with chunky nugs all the way down. Some branches Cola up pretty well too. Interseted to see how she does under the HPS.
Good job!
gr865
Well-Known Member
Very clean setup there OHD!
OneHitDone
Well-Known Member
Thought I'd post a little update on how things are going.
Side B Harvested, cleaned, and ready for reload tomorrow.
CBD Wall is coming alone nicely.
Side A is in week 5 with these Green Crack's
Nice and clean underneath and no bug issues!
Side B Harvested, cleaned, and ready for reload tomorrow.
CBD Wall is coming alone nicely.
Side A is in week 5 with these Green Crack's
Nice and clean underneath and no bug issues!
OneHitDone
Well-Known Member
Batch of Cherry Pie got moved from veg to flower tonight....
Shot of the Green Crack almost rounding out week 5
Shot of the Green Crack almost rounding out week 5
ToneOZ
Well-Known Member
Moat hids are mouted vertically in a factory type workplace setting. Cant honestly say ive ever seen mainteneance change a bulb tho im sure they do.
hybridway2
Amare Shill
Your GC looks like a good One.
That strain was a big hit out here some yrs back. Good to see someone running it, have not since back then.
Very nice NFT (NoFuckinProblems) bro.!
Is that Wall Letti i see above?
I remember back when i first started growing, Saying to my buddy how one could flower just about anywhere that orange light hit in the room & almost got crazy with Wall mounting but didn't. This was back when i made a huge mistake on my count n paid dearly for it.
Anyhoot, awesome to see you utilizing that often overlooked space.
Freakin Cherry Pie looks like a banger too.
Man, w/o good genetics its like pissing against the wind. My fist yr in my current room was all random, scrappy, crappy genetics. Did not know what i know now about Pheno-Hunting, S-1's, yadda, yadda.
So important.
Gotta find you a nice SweetBlackAngel or maybe that GC can replace it if it has similar Traits?
OneHitDone
Well-Known Member
Yep, lettuce and Kale chilling above the cannabis. Best tasting / freshest greens in town!
This GC has a very nice sweet hazy note. Similar to what the SBA was. Just gotta see if the nug structure stacks up on a full run, then I will know if she stays or if she goes.
OneHitDone
Well-Known Member
Green Crack just into week 6
OneHitDone
Well-Known Member
So here we go with another wacky OneHitDone creation.
Me and the standard Aerocloners just can't seem to get along so I got to brain storming.
Inspire by the GH RainForest - I Bring to you the OneHit Cool Mist Cloner!
Modded a Vicks Cool Mist humidifier as a sprayer / mister for a cloner. This should remedy the water temp issues I keep having with standard submersible pump / sprayer cloners.
I'll keep this updated as to if it actually works.
Me and the standard Aerocloners just can't seem to get along so I got to brain storming.
Inspire by the GH RainForest - I Bring to you the OneHit Cool Mist Cloner!
Modded a Vicks Cool Mist humidifier as a sprayer / mister for a cloner. This should remedy the water temp issues I keep having with standard submersible pump / sprayer cloners.
I'll keep this updated as to if it actually works.
OneHitDone
Well-Known Member
A little shot of the Green Cracks coming along
A little lettuce problem going on in here as well. Time to do some chopping and make the big salad!
A little lettuce problem going on in here as well. Time to do some chopping and make the big salad!
hybridway2
Amare Shill
Idk if you're McGyver or the Mad scientist from "Back to the Future". Lol!
@OneHitDone Hey, can you tell me about that water pump mounted to the wall. Is that one of those "RV" pumps, like this https://www.amazon.com/Diaphragm-Priming-Gallons-Marine-Demand/dp/B00P8BE6S8/ref=sr_1_7?keywords=rv+pump&qid=1578942502&sr=8-7?
What's it's job? I was thinking (based off seeing it in another's thread) of using one for top feed, with 1/4" tubing and manifolds (like orbit, floraflex, etc.)
I figure these might be better suited for that purpose, higher psi, lower flow (for keeping rockwool or coco the perfect moisture and even drain to waste).
I like how you made that cloner lid with two layers so pucks could be recessed. Is the foam glued together?
Thanks.
What's it's job? I was thinking (based off seeing it in another's thread) of using one for top feed, with 1/4" tubing and manifolds (like orbit, floraflex, etc.)
I figure these might be better suited for that purpose, higher psi, lower flow (for keeping rockwool or coco the perfect moisture and even drain to waste).
I like how you made that cloner lid with two layers so pucks could be recessed. Is the foam glued together?
Thanks.
OneHitDone
Well-Known Member
Yes it is similar to that pump. I like that one with the threaded fittings better than the ones I have with barbs but these were dirt cheap on amazon. You can see the 12V power supple right next to it.
Currently it is going to be used for pumping the water out of the clone reservoir.
I did use the same pump for a tip drip system and it worked very well - just be ready for the noise if the pump you choose sounds like this one. You can see what I had set up here:
#532
The layers of foam have a couple dabs of hot glue between them but also the 4 screws are going through both layers and into an 1/4" ABS plastic plate that is on the bottom of the foam for the motor assembly to sit on
hybridway2
Amare Shill
Whats this a small filter? Whats the white thing?
Clean work bro.!
Clean work bro.!
OneHitDone
Well-Known Member
The white thing is just the fittings adapting the barb hose fitting to the end of the filter assembly - that is a combo Filter / 30psi pressure regulator
In the post you linked? I don't see it. But just a 12v power supply (probably one in a box from an old device, haha), right?
EDIT: I see it.
Cool. Year, loud hey. My other concern is the pressure. I guess some type of pressure regulator is needed to bring down to a manageable psi, such as? Haha. I think the 5gph pumps like this run about 135-150psi? Haha.
Nice, doubt I could find some nice abs like that, but maybe could find something to replace. Nice one man.The layers of foam have a couple dabs of hot glue between them but also the 4 screws are going through both layers and into an 1/4" ABS plastic plate that is on the bottom of the foam for the motor assembly to sit on
Last edited:
I just realized, yes @gr865 is the guy I first came across that style of pump being used. Didn't realize was same guy. I need to figure out what's needed for about 18-20 plants, as far as pump (psi, volume) to run enough manifolds/drippers for them. I was thinking 2 lines per plant (redundancy) with 8 port manifolds.
OneHitDone
Well-Known Member
Pretty simply to figure out - the pump you linked is 3 gallons a minute x 60 minutes = 180 Gallons per hour
An emitter like this is 13gallon an hour wide open (which you would not do) so 180 / 13 = 13.84 emitters
If your running hardware store type irrigation just use one of the inline pressure regulators or the filter / regulator combo as I posted above.
Works like a charm and the distribution is very even