What did you accomplish today?

raratt

Well-Known Member
Watered the girls, swapped the timer to flip to 12/12. Filled the ice bucket and beer shelf, and put away the laundry.
Only 90 out at the moment, AQI down to 142. Cant see the smoke down the street now, however all it takes is a slight wind shift and we'll be back in it.
 

GreatwhiteNorth

Global Moderator
Staff member
whatcha making?
Stock photo, not my machine but of the two I do have, neither can be picked up with our 4K forklift.

I do all sorts of machining/fab/welding etc. . .
Custom Hydraulic cylinder from scratch? Not a problem.
Anchor chain fairlead w/ bracketry? Gotcha.
Replace Crane turntable bearings? Piece of cake.
etc . . .

I've built at least a dozen of these powered coilers from scratch. As the line gets pulled through the line hauler block it goes to this machine that
coils it inside the drum. We're talking up to 1000 ft + of 3/4" poly line.

coiler.jpg

If you've seen "Deadliest Catch" you have seen at least a couple I've built.
 

mysunnyboy

Well-Known Member
Stock photo, not my machine but of the two I do have, neither can be picked up with our 4K forklift.

I do all sorts of machining/fab/welding etc. . .
Custom Hydraulic cylinder from scratch? Not a problem.
Anchor chain fairlead w/ bracketry? Gotcha.
Replace Crane turntable bearings? Piece of cake.
etc . . .

I've built at least a dozen of these powered coilers from scratch. As the line gets pulled through the line hauler block it goes to this machine that
coils it inside the drum. We're talking up to 1000 ft + of 3/4" poly line.

View attachment 4664718

If you've seen "Deadliest Catch" you have seen at least a couple I've built.
That’s cool
 

raratt

Well-Known Member
Stock photo, not my machine but of the two I do have, neither can be picked up with our 4K forklift.

I do all sorts of machining/fab/welding etc. . .
Custom Hydraulic cylinder from scratch? Not a problem.
Anchor chain fairlead w/ bracketry? Gotcha.
Replace Crane turntable bearings? Piece of cake.
etc . . .

I've built at least a dozen of these powered coilers from scratch. As the line gets pulled through the line hauler block it goes to this machine that
coils it inside the drum. We're talking up to 1000 ft + of 3/4" poly line.

View attachment 4664718

If you've seen "Deadliest Catch" you have seen at least a couple I've built.
I recognized the coiler from there.
 

Laughing Grass

Well-Known Member
Rollitup Advertiser
Stock photo, not my machine but of the two I do have, neither can be picked up with our 4K forklift.

I do all sorts of machining/fab/welding etc. . .
Custom Hydraulic cylinder from scratch? Not a problem.
Anchor chain fairlead w/ bracketry? Gotcha.
Replace Crane turntable bearings? Piece of cake.
etc . . .

I've built at least a dozen of these powered coilers from scratch. As the line gets pulled through the line hauler block it goes to this machine that
coils it inside the drum. We're talking up to 1000 ft + of 3/4" poly line.

View attachment 4664718

If you've seen "Deadliest Catch" you have seen at least a couple I've built.
That so cool, I watched that show and gold rush where they're dredging gold in Nome. You guys are all so handy, building your own shit. I'm impressed!
 

manfredo

Well-Known Member
I love all the Alaska and fishing shows...

Why do plumbing problems always seem to come in multiples. I was about to go get groceries this afternoon when I get a text..."Water coming through our bathroom ceiling", from my newest tenant. Lovely... I gather tools and go over...He wasn't kidding...a good 20 gallons...like a repeat of yesterday! I got all the water sucked up and started the repair, broke a drain pipe and said see you tomorrow! It's in such a tight spot, is the worst part. No, all the college kid germs is the worst part!!

I could call a plumber if I wasn't so frugal...I mean cheap! But then I have to meet them there, stick around while they do it, and then get butt-raped when they are done. Might as well do it myself!
 

Aeroknow

Well-Known Member
@sarahJane211 - how are the solar panels working?

@Aeroknow - do you have new boots? If not, get some and see if it helps. It might just be your feet. The house looks awesome! All those windows! I wish I could help.
I’ve been rocking good boots since like 2 years into the trades. Before that I would buy some cheap ass boots like sears diehards. I would be walking around like I had hemorrhoids for like two weeks on the job because of the blisters them cheap fuckers would do to me. I’ve been rocking at least wolverines since, my last good pair were some ariats you know what happened to them.

Ever since the ariats burned i’ve been buying some cheaper boots that get er done, don’t hurt my feet. But i think it’s about time to splurge a little and buy some good ones.

i’m not sure it will help my back but what the fuck am I doing wearing cheap ass boots?
these are the cheap ass boots i’ve been rockin. Don’t laugh and yes my legs are dirty as fuck because i’m walking on some dusty ass dirt when i’m not up on the dance floor.
image.jpg
^^^^third pair lol.
Cheap boots from tractor supply that have been working.
Thanks for the reminder bro.
 
Last edited:
Top