1 part bloom mj?

Rjt08

Active Member
Anyone have any experience using a 1 part nutrient?,specifically mj prob bloom. Just wondering if anyone has a review on this product
 

DustyDuke

Well-Known Member
Anyone have any experience using a 1 part nutrient?,specifically mj prob bloom. Just wondering if anyone has a review on this product
No experiance with that brand. I've used one part nute for 4 grows and worked well didnt bulk up like other nutes I've used but was better quality. I would of hoped for slightly less nitrogen for flowering. Good luck mate
 

nunyabidness420

Well-Known Member
Anyone have any experience using a 1 part nutrient?,specifically mj prob bloom. Just wondering if anyone has a review on this product
Its not really a one part.
If you look at the % you'll see it doesn't have calcium.
You're suppose to use it in rotation with their cal kick product or cal spike product.
But you can't mix spike with anything else since its an EDTA based product, it has to be used in rotation.
You can mix kick and bloom, kick is basically cal/mag but you have to dissolve kick first.
I.... don't know why I bought 1kg of it probably because I didn't realized it lacks calcium..... I didn't get their kick or spike though.

I used my own DIY cal/mag with it and it was good for soil grows. Well... at least better than the 1 part generic garden store stuff I was using before. I do have to state that my results are not statically significant.

I also used it as a DTW coco/perlite nutrient. The plant died but I think that was my fault as I left my reservoir sit unattended for too long.

IF you are looking for a one part, this is not it.
 

Attachments

Rjt08

Active Member
Im not worried about the cal kick as the plants arent showing deficiencies, i was more wondering about the mix ratio instructions show 1-1.5 grams per litre wich gives a ppm of 200 seems like ppm would be kinda low
 

nunyabidness420

Well-Known Member
Im not worried about the cal kick as the plants arent showing deficiencies, i was more wondering about the mix ratio instructions show 1-1.5 grams per litre wich gives a ppm of 200 seems like ppm would be kinda low
Yeah their literature seems to be off.
I'm actually running a test now and mixed 1g of bloom with 1L of water to get me ph 5.6~5.7, 540ppm
The water alone is reading at ph 7.6, 0 ppm (I've seen the water read as 20~30ppm on other meters and the water company gives its official reading as 40ppm)
EDIT ph of water should be 7.2
 
Last edited:

Rjt08

Active Member
Yeah their literature seems to be off.
I'm actually running a test now and mixed 1g of bloom with 1L of water to get me ph 5.6~5.7, 540ppm
The water alone is reading at ph 7.6, 0 ppm (I've seen the water read as 20~30ppm on other meters and the water company gives its official reading as 40ppm)
EDIT ph of water should be 7.2
I used 3 part green planet for veg i switched to a one part bloom mj for flower bcos the amount i have to water it would be very expensive staying with the green plant schedule
 

nunyabidness420

Well-Known Member
I'm using their PLANT-PROD 18-9-27 for veg.
It might be discontinued or not part of their MJ line.
Works well enough but there's a slight problem with the powder not totally dissolving. I need to crush up the crystal at the bottom of the container and give it a minute to totally dissolve.

1g to 1L = ph 6.5, 560ppm
 
Top