Floraflex quick disconnect, After connecting to 3/4 inch PVC pipe then...? ❤️

[HighPar]

Hello I have 3/4 of an inch PVC pipe that fits directly into the 3/4 inch Floraflex quick disconnect manifold however my question is What can I use for the other side of the 3/4 inch piping To connect The 3/4 inch piping internally To an adapter So I can cemented in , And on the other side of the doctor I'd like a 3/4 of an inch Barb .

Now listen to this interesting vs I already got a 3/4 of an inch Adapter Two 3/4 of an inch Barb. It was a coupling And the side that is supposed to accept the 3/4 in PVC piping it doesn't fit into it because it has internally.

 

[Nizza]

GHT TO NPT QUICK DISCONNECT SET

The FloraFlex® Quick Disconnect tool easily connects your Flora Valve to your FloraFlex® Bubbler. Eliminates the need for using Teflon Tape during manifold assembly. Allows you to effortlessly disconnect the bubbler for cleaning purposes.

floraflex.com

so you have the head that goes on the 1/2" side that is male threaded ( the octo head) ?
then you need something that goes onto the opposite female side of the disconnect to go to standard 3/4 PVC?

You are looking for a 3/4" Male adapter

If going to hosing, try a 3/4" male hose barb adapter and full stainless steel clamps

 

[Renfro]

You can grab one of these barbed adapters from the hardware store.

 

[HighPar]

Excuse me I have to type this, I just typed this at 9:02 a.m. And at 9:02 a.m. and 30 seconds I had two replies from both of you guys. Which I will review. But that was just so strange I had to take a step back and see how you wrote a paragraph in like 30 seconds that is so crazy I've never seen that before in my life Literally check out the times you guys replied that was funny as hell thank you guys so much I'm at work so I'd like to check this out in a little while thank you so much guys

 

[HighPar]

You can grab one of these barbed adapters from the hardware store.

View attachment 4812525

Excuse me I didn't reply to talk post yet before yours but you see what this products are I would need the complete details specifications and where to buy it because I've already gone through buying like Two to three to four of these things I have one in the way right now in the mail So we'll see if that works . But I don't even know the size that you're saying or what it's called you see that's my problem Okay thank you bye

 

[HighPar]

GHT TO NPT QUICK DISCONNECT SET

The FloraFlex® Quick Disconnect tool easily connects your Flora Valve to your FloraFlex® Bubbler. Eliminates the need for using Teflon Tape during manifold assembly. Allows you to effortlessly disconnect the bubbler for cleaning purposes.

floraflex.com

so you have the head that goes on the 1/2" side that is male threaded ( the octo head) ?
then you need something that goes onto the opposite female side of the disconnect to go to standard 3/4 PVC?

You are looking for a 3/4" Male adapter

If going to hosing, try a 3/4" male hose barb adapter and full stainless steel clamps

Thank you I'll try to research this and look into it when I'm on break from work for a little longer or after work . What I have is a 3/4 in pipe that's PVC. And I have a 3/4 inch tubing line . So I need something that will connect the PVC pipe To the tubing Connect line. Yes one of the drain holes has 1/2 inch line But I don't think I mentioned anything about half an inch. Maybe I'll look into using an oversized thing to make it fit is that what you're saying? I'll look into this post when I'm not at work and I really appreciate