• Here is a link to the full explanation: https://rollitup.org/t/welcome-back-did-you-try-turning-it-off-and-on-again.1104810/

Clones getting sad and diying

C

Calivalley209

Member
Ok so I post it before in here that I qs having problems with clones some.were betting brown stem and.other ones were getting sad and die my success was only 10% so now am going to do this little experiment
Am cloning 2 basquets one with dome other one with out dome temp. 75 for both ph5.8 both
Am going to try to post day by day to shoe how they doing if any of you got some suggestions please let me know or if am doing some something wrong let me know too please thank
 

Attachments

Wastei

Wastei

Well-Known Member
I personally don't understand how everybody got the patience with running clones in domes when you can clone in a simple DWC cloner?

I can't remember when a clone didn't root. I set them in the cloner with ambient light and temperature typical 20C/68F.

No wilt, misting, cubes and no watering except when filling the cloner. Set and forget, roots in 7-10 days.
 
myke

myke

Well-Known Member
Wastei said:
I personally don't understand how everybody got the patience with running clones in domes when you can clone in a simple DWC cloner?

I can't remember when a clone didn't root. I set them in the cloner with ambient light and temperature typical 20C/68F.

No wilt, misting, cubes and no watering except when filling the cloner. Set and forget, roots in 7-10 days.
Click to expand...
Ive done both ways over the yrs,now Im rockwool and domes.Space is limited so that works for me.I use the 1.5" cubes they dont need water until they root so not much work.For me domes and hormones works faster then a bubbler.
 
Wastei

Wastei

Well-Known Member
myke said:
Ive done both ways over the yrs,now Im rockwool and domes.Space is limited so that works for me.I use the 1.5" cubes they dont need water until they root so not much work.For me domes and hormones works faster then a bubbler.
Click to expand...
If I were to use IBA-K and NAA(KLN) you start to see nubs in a couple of days. Whatever works is good. But I see to many new growers struggling with the easiest part of growing Cannabis, rooting clones.
 
C

Calivalley209

Member
It
Wastei said:
I personally don't understand how everybody got the patience with running clones in domes when you can clone in a simple DWC cloner?

I can't remember when a clone didn't root. I set them in the cloner with ambient light and temperature typical 20C/68F.

No wilt, misting, cubes and no watering except when filling the cloner. Set and forget, roots in 7-10 days.
I know but when you need to do 300 at the time it's kinda hard yo get those DWC cloners
Click to expand...
 
GlassJoe

GlassJoe

Well-Known Member
Calivalley209 said:
Today it's going to be day 2 should I still open the vents
Click to expand...
Feel free to crack them a little and if the humidity gets low and you see wilting mist them.

Wastei said:
If I were to use IBA-K and NAA(KLN) you start to see nubs in a couple of days. Whatever works is good. But I see to many new growers struggling with the easiest part of growing Cannabis, rooting clones.
Click to expand...
I switched from aeroponics to cubes and have had better results; I like not having to run a pump and my cuts have generally rooted 1.5 inch rockwool cubes enough to be transplanted to 4" pots in 10 -12 days.
 

Attachments

Wastei

Wastei

Well-Known Member
GlassJoe said:
Feel free to crack them a little and if the humidity gets low and you see wilting mist them.



I switched from aeroponics to cubes and have had better results; I like not having to run a pump and my cuts have generally rooted 1.5 inch rockwool cubes enough to be transplanted to 4" pots in 10 -12 days.
Click to expand...
Awesome that you found something that works for your setup and setting. But it was probably due to operator error on the cloner, mixing rooting styles and running higher temps and humidity with water cultures leading to rot. But I may be totally wrong on that one, to many variables with local climates etc to really say what is. You can only really speculate.

I see many people struggle with the Aero cloners, not so much water cloning in DWC. I actually experimented with this a little myself couple of weeks ago and I never really got the aero cuts to root in my aero chambers. Maybe LPA works to some degree but I believe DWC is a superior method in many ways. It's very fail safe IMO. Even if the power goes out you're good. Cheers!
 
Last edited:
myke

myke

Well-Known Member
If I had a clone after 14 days that didnt root in aero Id dip it and drop in rockwool. it would root much faster compared to leaving it in aero. I always had some that took much longer,in domes it seams more consistent.
 
GlassJoe

GlassJoe

Well-Known Member
Wastei said:
Awesome that you found something that works for your setup and setting. But it was probably due to operator error on the cloner, mixing rooting styles and running higher temps and humidity with water cultures leading to rot. But I may be totally wrong on that one, to many variables with local climates etc to really say what is. You can only really speculate.

I see many people struggle with the Aero cloners, not so much water cloning in DWC. I actually experimented with this a little myself couple of weeks ago and I never really got the aero cuts to root in my aero chambers. Maybe LPA works to some degree but I believe DWC is a superior method in many ways. It's very fail safe IMO. Even if the power goes out you're good. Cheers!
Click to expand...
I didn't have a high fail rate or anything, I'd lose maybe one in a batch of 24 cuts, it was just a slower method of rooting them and needed to be powered.

To me, if rooting in media has a comparable/faster time, it's a significantly simpler way to achieve the same results. To each their own, but most commercial nurseries propagate in rockwool cubes, so it's good enough for me.
 
C

Calivalley209

Member
Wastei said:
Not a big deal. Just buy a hole saw a little smaller than the neoprene plugs and build the cloner you want. Mines are 16 or 8 sites depending on the size of cuts. You can put 3 clones in every puck if you want.

You build the cloner to match your plant count. But whatever floats your boat. Cheers!
Click to expand...
Can you show a pic of yours if you don't mind please thanks
 
myke

myke

Well-Known Member
Thats all i do,a couple drops of ph down and soak the cubes.I dont check ph. I do soak clones in water for 24 hrs first though.
 
You must log in or register to reply here.
Top