Advantage V. disadvantage CFL's
- Thread starter lastfrontier
- Start date
Anotheroldephart
Well-Known Member
I wouldn't. If you can try and find one of those bathroom fixture with 3-4 bulbs, then it can be placed H or v. easiest though to take the time and build your own WAY cheaper.. and easy. Bulb + socket from HD was $10 . This way, you won't have miles of extra wires in box.
chronik4lyfe
Well-Known Member
yeah that will work hang light 3" over plant, more light is always better tho, 1 bulb aint gunna do much
Anotheroldephart
Well-Known Member
I assume you're using multiple bulbs..like6-8 right?
chronik4lyfe
Well-Known Member
yeah goin from 6 to 12 bulbs friday
Anotheroldephart
Well-Known Member
What size is your cabinet? Oh yeah..get some mylar from a crafts store.
chronik4lyfe
Well-Known Member
4'w-3'l-3'h, nd i dont need mylar that reflective stuff i got in the back ground is wayy better
Anotheroldephart
Well-Known Member
Sure, but you'd have heat build up. How big is your cabinet? That will determine what lights are best. Besides, I'm prejudiced for CFL's*lol* While they do cost more to purchase, they are way cheaper to run. I figure I've saved $2K in 2 yrs..over the costs.
Anotheroldephart
Well-Known Member
You've got room for more than 1 . If you want yeild look in to SOG Hempy Cloning.. The long road will get you more nug.. To keep her short you'll need to start pinching young and tie her down...The pinching will lenghten the grow time a bit . While all that is happening, start a mother and go for the gusto. Just this evening I transplanted 32 DP clones into a 32lx18wx8d tub. The ladies will get about 14-16 inches tall.. 1 bud from top to bottom...
lastfrontier
Well-Known Member
what you are using is sun film and is way better then mylar well not way better but better you can wash it and it is more reflective it is reusable a little tip if you want a hood then you should find a shape you want and find in your area a sheet metal shop and have them press it for you what ever you do please make it out of aluminum it is easy to drill it is also a great heat sink and easy to punch holes in holes for the lite sockets hell have the sheet metal guy do it for you for a shop to press the hood and punch the holes where you want them should cost less then $100.00 closer to $75.00 thyat is a cheap hood and presto all the other thing can be found localy just make sure you ge the wiring correct so you dont come home to a burned down house.
red-shield@hotmail.com
o yea here i almost forgot the periods here they are for you to put where ever you want them to go ...........................................................................................
red-shield@hotmail.com
o yea here i almost forgot the periods here they are for you to put where ever you want them to go ...........................................................................................
Anotheroldephart
Well-Known Member
That would cost me 500 for my new batch, and another 5 for replacements!! I can build 3 hoods for $20!!
I just got back from HD, got some 42W 2700K bulbsI'm going to design a hood for my style grow. I also found the IDEAL sockets also. The kind from bbig commercial building sites. @ wires run under the top, then then the top is screwed back down. Under the top are 2 SS points that puncture the wire cover for connection. They are rated at 660W and @%)volts plent strong enough. These will make it so simple to wire in as many lights as wanted, as close as wanted without all those screw in splitters, which are dangerous as hell. These sockets are $2.50 each.
I will take pics of every stage of the build, and when I find out where that missing security token went..I'll upload the whole shebang.
I just got back from HD, got some 42W 2700K bulbsI'm going to design a hood for my style grow. I also found the IDEAL sockets also. The kind from bbig commercial building sites. @ wires run under the top, then then the top is screwed back down. Under the top are 2 SS points that puncture the wire cover for connection. They are rated at 660W and @%)volts plent strong enough. These will make it so simple to wire in as many lights as wanted, as close as wanted without all those screw in splitters, which are dangerous as hell. These sockets are $2.50 each.
I will take pics of every stage of the build, and when I find out where that missing security token went..I'll upload the whole shebang.
jimmy130380
Well-Known Member
hey quick question
ive 4 nelson 42w =240w
in 2 colors cool + day
there big buggers will they do the job if so how many plants would you say they would do
ive 4 nelson 42w =240w
in 2 colors cool + day
there big buggers will they do the job if so how many plants would you say they would do
Anotheroldephart
Well-Known Member
Some where on the bulbs should be a Kelvin rating..Either 2700K or ^500K . 27 flower, 65 veg. .You'll need more than that if you want more than 1.imo. Have you read my last post?
jimmy130380
Well-Known Member
here is a pic of 1
i have 4
2 at 2700
2 at 6500
they are the biggest i could get in oz
i read ur post and i should be clearer on what im asking sorry
but thanks 4 helping
i just worked out how to post pics
i have 4
2 at 2700
2 at 6500
they are the biggest i could get in oz
i read ur post and i should be clearer on what im asking sorry
but thanks 4 helping
i just worked out how to post pics
chronik4lyfe
Well-Known Member
u could grow 1 fairly nice plant, or even 2 decent ones
jimmy130380
Well-Known Member
cool im using a 250 mh at the moment but thinking putting these fuckers in 4 extra light
i got 6 on the go
with all that it would be alright?
i got 6 on the go
with all that it would be alright?
Attachments
Anotheroldephart
Well-Known Member
I STILL can't post pics.. I think my host won't let me..So i'm gonna BITCH at them!!!
chronik4lyfe
Well-Known Member
well theyd def all grow, but i think that with mabye another 3-4 cfls would do tonnes better
Anotheroldephart
Well-Known Member
Should be, but i don't see any mylar. That will help tremendously .Almost like doubling your lights.