Led grow light
1) [FONT=宋体]90WUFO[/FONT]Plants can replace 3-5 times the lamp power, high pressure sodium lamps, saving 80% of the power chip[FONT=宋体].[/FONT]
2) LED wavelength specified by the customer, we recommend use of 620-630nm wavelength red light and 640-660nm, blue wavelength using the 450-460nm and 460-470nm. Red light to promote plant germination, flowering, blue to promote plant growth, you can choosemore appropriate wavelength and color scale for plant growth.[FONT=宋体]。[/FONT]
3) The ratio between the different light specified by the customer, we recommend that the ratio (red: blue) 8:1, 7:2 and 7:1:1, red. Blue. Orange. White mixed light available to plants.
4) Attention[FONT=宋体]:[/FONT]
[FONT=宋体]1.[/FONT] Indoor use only.
[FONT=宋体]2. [/FONT]Can not be used in place of water or irrigation areas so as to avoid light damage.
[FONT=宋体]3. [/FONT]exposure time of Plants light and sun light and time should be 10-14 hours.
[FONT=宋体]4. [/FONT]There the old saying goes too far, if not time to absorb and digest the growth rate will be affected.
10) Irradiated area: 90W irradiation area is 28 M ² / 3m, 90W square is 31 M ² / 3 m, 300W is 120M ² / 5m high, 600W is 180M ² / 6m, 120W plants light is 78M ² / 3m, 50W Plant Light is 19.6 M ² / 3m.14W Plant Light plate is 1 meter / 3M2, 2 m / 6M2. 14W and 45W from the plants are 1 m minimum height
11) Plant two 90W lamps are placed at intervals of 3 meters one, 120W is put a 3-meter intervals, 300W is placed every 4-5 meters a, 600W lamp is every plant put a 8 m