if you had 1 1/2 sheets of plywood?

F

fdd2blk

Well-Known Member
robert 14617 said:
got it when should i come the fuck to your house and build it for you / get off your ass and do something for yourself
Click to expand...

i'm gonna start giving out infractions. this is completely uncalled for. you have been warned



all of you who chose NOT to help, please just don't post. thanks.
 
H

Herbal Overdoser

Active Member
You guys have the wrong take on this, it's like a build your dream discrete grow box, your only requirement be its maximum size is 48 sq ft. He doesn't want design ideas, he wants a game.
 
E

ejf1676

Well-Known Member
fdd is right just because its a stupid question don't lower yourself any way i built a cab out of 2x6 that i ripped into 3 pieces for frame 1x10 ripped into 4pieces for trim and louan for sheathing (it's like 5-7$ asheet ithas a 22x33x80flower room #2-22x12x24 rooms for veg and moms and a12x12x22 mechanical room (ballast pumps timers switchesetc.) i built the whole thing for about 100$ minus lights fans stained it maple and it looks like a high end cabinet https://www.rollitup.org/general-marijuana-growing/156412-newbie.html check it out
 
B

budsbuds

Active Member
DaGambler said:
i'd take a sheet and a half of plywood... and make 3 shelves: each 2' by 8'. Then i'd put 12 four foot 2 bulb flourescent lights over those shelves. Then i'd start on the flower room.

NAW.... I'd take 1 1/2 sheets of plywood and make a bunch a fuggin birdhouses.... and then sell those so i could buy some real fuggin materials to work with :D
Click to expand...
I gotta agree with you on the bird house idea. But then again that might be a little complicated for this genius with his plywood.
 
GrowTech

GrowTech

stays relevant.
If I had 48 square feet of wood, I would build a giant ark to house all of the different varieties of cannabis, and then I would sail it over to my private island, and cram them into veg tents, and while they veg, I will install drip lines all over the island and plant clones in such a way that from Google Earth all the plants would resemble a picture of Homer Simpson.

Thank you very much :)
 
S

SlikWiLL13

Well-Known Member
ejf1676 said:
fdd is right just because its a stupid question don't lower yourself any way i built a cab out of 2x6 that i ripped into 3 pieces for frame 1x10 ripped into 4pieces for trim and louan for sheathing (it's like 5-7$ asheet ithas a 22x33x80flower room #2-22x12x24 rooms for veg and moms and a12x12x22 mechanical room (ballast pumps timers switchesetc.) i built the whole thing for about 100$ minus lights fans stained it maple and it looks like a high end cabinet https://www.rollitup.org/general-marijuana-growing/156412-newbie.html check it out
Click to expand...
sounds like you figured it out all by yourself too!

GrowTech said:
If I had 48 square feet of wood, I would build a giant ark to house all of the different varieties of cannabis, and then I would sail it over to my private island, and cram them into veg tents, and while they veg, I will install drip lines all over the island and plant clones in such a way that from Google Earth all the plants would resemble a picture of Homer Simpson.

Thank you very much :)
Click to expand...
:clap::clap::clap::clap:
 
Solstice07

Solstice07

Well-Known Member
k2klyxx said:
Heres what I Face for a theoretical question....

if you were given 1.5 pieces of plywood (48 sqft) and a and a workshop in which to work with the wood... how would you design your discreet Grow?
Click to expand...
How discreet does it have to be? Unless your dad is Ethan Allen, a sheet and a half of plywood made into a box is going to look like a sheet and a half of plywood made into a box.
 
B

BlazaBlaze

Well-Known Member
My grow is pretty much the exact same thing. What I did was built the box against a wall so that you only need three sides and a top. Attach the top on hinges so that you can lift it up, almost like a chest. In your situation, this is one thing you can do next: if you drive around and find a garage sale or something pick up something with drawers, then use the fronts of the drawers to make your box look more like a dresser. After that, put it in an inconspicuous area in your house. Maybe put some boxes or something that is easy to move on top so that no one can accidentally notice that the top opens and youre done. Hope that helped.
 
dusty26

dusty26

Well-Known Member
oh ok, I get it ....

I'd nail the half sheet to the full sheet and spray paint ... HELP I NEED MARIJUANA GROWING SUPPLIES with an arrow pointing to your house ...
think it would work ?
hmmm... try it



haha... lol um... hey I was playin ...

so lemmy guess... in carpentry class you've got access to 1 1/2 sheets of plywood and of course a class full of wood working tools am I right ?
 
You must log in or register to reply here.
Top