Harvest a Pound Every Three Weeks!

StinkBud said:
When the time comes I just pull them up out of the containers and move them into the flower room


Yeah I was wondering if you pull out the whole net pot with the plant, that is what i figured you do, or take the plant out of the pot.

I definatly think it is the first now that I really think it. So that means that from clone all the way to flower they stay in the same pot. Is that correct?

skeet420



"Always play both games of life"
Click to expand...
 
Boost bucket are great and work from everyone that I know that has one. If you have a smaller/ sealed room then for sure the boost bucket will do, can't say they are going to give you a steady constant output of co2 but you should make sure to have it hooked up to your light cause co2 is not needed at night. You would keep it on if you have all your units in one sealed room.
 
skeet420 said:
StinkBud said:
When the time comes I just pull them up out of the containers and move them into the flower room


Yeah I was wondering if you pull out the whole net pot with the plant, that is what i figured you do, or take the plant out of the pot.

I definatly think it is the first now that I really think it. So that means that from clone all the way to flower they stay in the same pot. Is that correct?

skeet420



"Always play both games of life"
Click to expand...

One of the handy parts of using the stink system, is you never have to transplant. Move the whole net pot to the next unit. And when you harvest you might be able to keep some net pots but the sleeves are one plant only
Click to expand...
 
jaxon1080 said:
I have a question that might have been answered but here it is anyway. I recieved my clones in rockwool cubes and try to remove as much of the medium as possible without damaging the new root system but when the sprayers are on the rockwool retains the water obviously but is this going to give me root rot or overwatering? the tips are curling under after 3 days.
Click to expand...
i leave mine in the rock wool w/no ill efects if your tips are curling up its to much heat
if they curl down to much nuites
hope this helps
 
Ok i finally built it ...just need to make a few holes for pvc fence post to drain into

i used a 35 gallon rez ....and usually fill those about 25 gallons worth

i have used them in past for 3x3 ebb and flow trays

anyways i dont have a timer yet ...and i know i have asked before but will i be ok with running sprayers constantly (just until i get timer like 2 weeks )

the transplants are coming from my rainforest that runs constantly

thank you stinkbud this system was a cinch to make ...and i believe its gonna kick ass
 
Maybetomorrow said:
skeet420 said:
One of the handy parts of using the stink system, is you never have to transplant. Move the whole net pot to the next unit. And when you harvest you might be able to keep some net pots but the sleeves are one plant only
Click to expand...

If you use Neoprene sleeves, which I heard work really well for the aeroponic grower. Are they the same way where once the clone goes in it you just move the whole thing? How do Neoprene sleeves even look/work? Anyone with personal experience on that?
Thanks alot for any answers, just wanna make sure my baby girls get taken care of right.

skeet
Click to expand...
 
I suggest reading a bit more of the thread.

The neoprene collar is simply a rubber\foam like material, the same material used in wetsuits. It not only keeps your sprayers from soaking your floor (sealing the unit) it holds your plants in place. As the plant grows, it will stretch and allow the stalk to take up the room it requires. Not rocket science :)

Again, spend some time reading the thread. Plenty of good info here. Enjoy

016-3.jpg


005-10.jpg


009-10.jpg


023-5.jpg


 
hi stink, what are your thoughts on doing a scrog method on your system? Im fascinated by your system but i love the scrog method and want to incorporate them both. What do u think??
 
thank you bibtimer but i diluted my nutes low .ppm i dont know. my timer is 15 on 15 off i am changing to nft timer but my concern is solely if the rockwool will saturate the roots and cause problems
 
jaxon1080 said:
thank you bibtimer but i diluted my nutes low .ppm i dont know. my timer is 15 on 15 off i am changing to nft timer but my concern is solely if the rockwool will saturate the roots and cause problems
Click to expand...

Using rapid rooter plugs, and or rockwool will not hurt your plants. I started from seed, with rapidrooter plugs. They just go right into the net pot. I've had no problems yet with using rapid rooter plugs in stink system.
 
DIRTHAWKER said:
I have 9 bubba kush plants 10 inches tall in a veg unit. They are not going into my flower room. OG kush will fill my next available flower unit.
I am thinking of taking all 9 of these bubba and ziptye them loosely together, bury them with there longass roots and stick them in a half wine barrel with foxfarm nutes, horseshit, and perlite. Water them with my reservoir changes and see what happends.

thoughts?
Click to expand...

Here is how to do it...

Buy a large square pot. Fill the bottom about 1/4 of the way with Hydroton grow rocks. Put 4 1/2" pvc pipes in each corner of the pot running from the top to the bottom. These will let air down to the roots.

Cover the Hydroton with stainless steel window screen material. Now mix 1/2 good quality soil and 1/2 pearlite and fill the pot.

There you go...It's kind of a hybrid hydro system because the water drains so fast. You need to water everyday or have some sort of a sprinkler system set up.

Use the same nutrients that you do for your hydro stuff. Watering with your left over nutes works great!

The bigger the pot, the bigger the plant!

Have fun bro!
 
GravesKeeper420 said:
hi stink, what are your thoughts on doing a scrog method on your system? Im fascinated by your system but i love the scrog method and want to incorporate them both. What do u think??
Click to expand...

There are already some StinkBuddies trying the scrog method with success. They just tied up some netting to the supports.
 
robotninja said:
How much higher does Co2 allow your temps to go? I'm floating at 76-80 degrees on average. Is it possible to run Co2 without the aid of AC? Just exhaust every few hours or so?
Click to expand...

85 degrees is best with CO2. I tried running higher temps but my plants didn't like it at all.
 
ifixbax said:
Coleman makes a small propane heater called a procat.

http://www.coleman.com/coleman/colemancom/detail.asp?product_id=5053A751&categoryid=3000&brand=

It is a catalytic heater that is designed for inside use. Has a platinum catalyst to produce no carbon MONOXIDE, but all carbon DIOXIDE (CO2).

Opinions needed on if this will work in a small grow room, up to 8x8x8 (512 cu ft) and if this would be cheaper than using a CO2 tank. Puts out 3,000 BTU that I think can be offset by A/C.

TIA
Click to expand...

No Way! The only way you could get away with using a heater for CO2 is if you live in Alaska and are growing in your garage in January.

Trust me on this, a CO2 tank is the only way to go, especially in the Summer!
 
You must log in or register to reply here.
Back
Top