Bmarley
Member
So this is my Fairly Stealth Grow cab. I have poly type material that is super heat resistant and very reflective covering nearly every square inch of the inside. The plant is a 1 month old sativa strain. She has an aqua gl0be in her to keep up on watering (just a test run). I also check her soil once or twice a day to make sure the globe is working. She gets misted 3-4 times a day on the leaves with only the finest of distilled water. She is currently under 4 CFL's 2 daylight 6500k 26watts and 2 5500k 27 watts. The lights are running 18/6 off from midnight to 6am . I have a digi thermometer wired in and out to the side of the cab so I always know the exact temp. It stays roughly between 75-77 degrees. I also have a DIY Co2 generator in the bottle with yeast sugar and water that the sativa just loves.
Now for my questions.
I have posted below pics of the grow.<ha that rhymes> I have 10 pc fans I purchased for intake/exhaust. ( I dont plan on using all of them..just happen to get them really cheap. They typical are 12v dc 80mm pc fans. I plan on running 2-3 for intake on the back lower side of the cab. I also plan on running 2-3 for exhaust through the top/back of the cab. I want to run my exhaust fans through my DIY carbon filter that is pretty much the same as this one https://www.rollitup.org/do-yourself/101248-best-diy-ez-walmart-carbon.html
1. What is a simple and safe way to power all of the fans, with the ability to control the speed of the fans.
2. What do you think is a safe and effective way to attach the DIY carbon filter to the exhaust fans so the air-out will be filtered.
3. Any recommendations for mounting the intake fans to the back of the cab would be appreciated as well.
Once my intake/exhaust and filter are all installed, I plan on raising this plant to be a mother and using half of this cab for her and the clones veg state and the other half for a semi-sog flowering chamber with the 62w 2700k and 42w,27w 3500k Flowering CFLs pictured.
Whatcha think? Suggestions? Advice? Fan Help? god im stoned....
1-one love-1
Now for my questions.
I have posted below pics of the grow.<ha that rhymes> I have 10 pc fans I purchased for intake/exhaust. ( I dont plan on using all of them..just happen to get them really cheap. They typical are 12v dc 80mm pc fans. I plan on running 2-3 for intake on the back lower side of the cab. I also plan on running 2-3 for exhaust through the top/back of the cab. I want to run my exhaust fans through my DIY carbon filter that is pretty much the same as this one https://www.rollitup.org/do-yourself/101248-best-diy-ez-walmart-carbon.html
1. What is a simple and safe way to power all of the fans, with the ability to control the speed of the fans.
2. What do you think is a safe and effective way to attach the DIY carbon filter to the exhaust fans so the air-out will be filtered.
3. Any recommendations for mounting the intake fans to the back of the cab would be appreciated as well.
Once my intake/exhaust and filter are all installed, I plan on raising this plant to be a mother and using half of this cab for her and the clones veg state and the other half for a semi-sog flowering chamber with the 62w 2700k and 42w,27w 3500k Flowering CFLs pictured.
Whatcha think? Suggestions? Advice? Fan Help? god im stoned....
1-one love-1
Attachments
-
111.5 KB Views: 109
-
68.4 KB Views: 170
-
81.1 KB Views: 120
-
72.9 KB Views: 123
-
93.2 KB Views: 109
-
35.9 KB Views: 82
-
51 KB Views: 127