Hey, This is no problem. You are going to need a couple of things. First go to 7-11 and get one of those metal straws, any copper or stainless will work but the straws are only $1 so they are cheap. Then go to the local hardware store and get either RONSON butane (only this brand as others have additives to prevent this, and definatly not camping butane as that will KILL you.) or the local Acetone, alcohol will also work if you have a retort and such. You will also need a PYREX measuring cup. (pyrex cuz it can stand the heat better and is nearly unbreakable.) Then large screen from your local smoke shop and a fitting to hold the screen on one end of the piping. Then take the cap off a soda bottle and use a small kitchen knife to make a hole just big enough for the end of the butane can to fit through. Fill the tube with your marj. (Schwag) and run the butane through it into the pyrex container. Two or three cans is enough for 1/2 oz. AS far as alcohol or acetone, you can simply use it as you would any other distillate place in, heat, collect, replace and do this about 4 times to get the best result. Keep it liquid by keep adding acetone or alcohol until the last time. Then simply let it bouil itself out, you will end up with a dark green/ black gooey substance. Add a little of your chosen solvent (1/4 oz. per oz of starting product) and use a small paintbrush to paint it on your cigs or the inside of your pipe. Alternatively you can take all of the goo and add 1/2 oz of solvent per oz of product, dump all of your weed in and mix it up really well while puting your pyrex container in just barely boiling water untill it all evaporates.
