Grow Room Too HOT!

Withthebiscuit

Well-Known Member
I read that the highest tempature it should be is 75 well mine is 90 ;/
i have 3 freaking fans blowing and its still hot i leave the door open here and there but wont be able to all the time HELP!:neutral:
 

Redmist

Member
Could you adjust your lighting for something that doesn't kick out quite so much heat? Or make your space bigger at all? The plants obv give off a little heat as they grow, could you lower the amount of plants in your space? Other than yet more fans I'm struggling to see how you could lower your temps. Of course unless someone a lot wiser than I can help? Good luck!
 

KindOfBlue

Active Member
400 wat with 4 plants but going to ahave 6 my homie said i have regular fans and i need an exhaust one i guess
Yeah you definitely need exhaust. A 400w shouldn't create that much heat as long as the air is moving adequately. Watch that temp, anything past 85-90 = heat stress, poor/stunted growth
 

justparanoid

Well-Known Member
keep the intakes low, and the exhaust up high. Passive intakes work best in my experience.

do you have a pic of your setup? Maybe we can suggest something from what we see.

JP
 

BCBuddy420

Well-Known Member
I am one of those " jam a few 1000's in a tiny space and fill it " growers. I know a thing about a thing or two... you need an assisted intake , not just passive. I always assist my intakes now. Here's an example; I have a veg room that is 9' x 5' x 6' tall with a slanted ceiling packing a 1000 watt mh. I have an 8inch vortex taking air out through ducting and an 8inch duct running in with a small 6 inch fan ( square, black and 26 bucks at the hydro store ) tucked and taped securely in place just inside the ducting, about 3-4 inches. I have an oscillating fan setup just in front of the intake. I seal the room up everywhere else except the two ducts and I hit 73-75. Trust me if I just kept the door open I would be at 96+ maybe even 100. Costs a few bucks and it's a little bit of work but it's worrrrth it bro.
 

justparanoid

Well-Known Member
the only reason i dislike powered intakes is most people think a pc fan will do the trick when its not made for that purpose.

JP
 

BCBuddy420

Well-Known Member
keep the intakes low, and the exhaust up high. Passive intakes work best in my experience.

do you have a pic of your setup? Maybe we can suggest something from what we see.

JP
I recemtly started assisting all my intakes with those cheap little square inline fans and I'm LOVING my temps. The trick is if you have a 6 inch intake, stuff a 4 inch fan into the ducting and tuck-tape the unit air tight. The good thing is you only need the same size duct in/out of the room and it flows that cool clean air nicely.
 

justparanoid

Well-Known Member
I use a six inch inline duct fan for my exhaust and two passive intakes. i run 8 degrees over ambient.

I am totally open to better ways to vent, My new box will be setup with a better venting plan. I was a fresh noob when i built my cabinet.

JP
 

bluesdad

Well-Known Member
keep the intakes low, and the exhaust up high. Passive intakes work best in my experience.

do you have a pic of your setup? Maybe we can suggest something from what we see.

JP
dude the man needs more than passive intake.2-3 times more intake than exhast like i said bro
 

Devildog93

Well-Known Member
If you are using a "constant on" venting system, then DON'T use a bigger intake than exhaust.

This is what I do for a COMPLETELY smell free setup (other than in the room itself)

I had a 400W 8" exhaust fan combined with a carbon filter. I had a 6" passive intake....no fan on the intake. Just a 6" flap.

By pulling air out of the room faster than it comes in, the room has a "negative pressure".

If you push more air in than out, you end up pushing stink out of tiny cracks, thus negating the point of the carbon filter. The stink finds its way out without being "scrubbed" or filtered.

Do what you wish but I would NEVER have a powered intake that is bigger than my exhaust.

I used an ozone machine on a timer in the "outer" rooms during lights off time. My plants stunk much less in dark so a masking device worked fine during lights off.

No one had a clue I was growing, and I had several parties at my house. No one ever smelled my plants. Of course I locked the basement door when people were over so they couldn't smell the "ozone" if lights were off or hear the fans and ballasts when lights were on.
 

choempi

Well-Known Member
If you are using a "constant on" venting system, then DON'T use a bigger intake than exhaust.

This is what I do for a COMPLETELY smell free setup (other than in the room itself)

I had a 400W 8" exhaust fan combined with a carbon filter. I had a 6" passive intake....no fan on the intake. Just a 6" flap.

By pulling air out of the room faster than it comes in, the room has a "negative pressure".

If you push more air in than out, you end up pushing stink out of tiny cracks, thus negating the point of the carbon filter. The stink finds its way out without being "scrubbed" or filtered.

Do what you wish but I would NEVER have a powered intake that is bigger than my exhaust.

I used an ozone machine on a timer in the "outer" rooms during lights off time. My plants stunk much less in dark so a masking device worked fine during lights off.

No one had a clue I was growing, and I had several parties at my house. No one ever smelled my plants. Of course I locked the basement door when people were over so they couldn't smell the "ozone" if lights were off or hear the fans and ballasts when lights were on.
Agree, instead of using a intake fan, use a bigger extractor. Positive pressure raises temps. Passive intakes need to be big enough also.
 
Top