DemontauruS
Active Member
New indoor grow - started April 1st. Here's the deal.
SEEDS
(10) Bubble Ice fem autoflower
(2) mystery gender White Widows
METHOD
(2) EcoGrower Max, 6" pots, air bubble drip, hydroton medium, pinch of cocotek at the top where cracked seeds grew into, GH nutrients (half the strength recommended), mylar surround
LIGHTS
(2) 357Magnum LEDS
SPACE
5.5' x 2'
TEMPS
Above seedling: 76-82 F (most of the time)
Below seedling water chamber: 64-68 (most of the time)
First time using the EcoGrower and the Magnums. As soon as the seedlings cracked a tail, I put them in the hydroton medium with a pinch of cocotek at the top to keep it moist, as I did not want to run the dripper 24 hrs.
1st problem: three days in I looked in the EcoGrow water chamber out of curiousity, smelled moldy mildew. Pulled a pot or two and found that about all of them have white powdery mildew on the cocotek liners. The water temp was to high and running near 78 deg for thre days, so panicked, and because I didnt have a water chiller, I exactoknifed a heat shield that I fit over the entire growing area that divis the heat above the seedlings from the cool air Im fanning in from the outside. Its a temp fix until I get a couple of small chillers for the 17 gal chambers.
Any recommendations or experience with anything similar here? The strains, lights, liner mildew, growing system, etc? Im gone from outdoors to indoors, and never saw much on the EcoGrower system or Bubble Ice autoflower strain, which claims 20% thc. PS - the mildew has not spread or worsened since lowering the water chamber temps to the mid to low 60's.
SEEDS
(10) Bubble Ice fem autoflower
(2) mystery gender White Widows
METHOD
(2) EcoGrower Max, 6" pots, air bubble drip, hydroton medium, pinch of cocotek at the top where cracked seeds grew into, GH nutrients (half the strength recommended), mylar surround
LIGHTS
(2) 357Magnum LEDS
SPACE
5.5' x 2'
TEMPS
Above seedling: 76-82 F (most of the time)
Below seedling water chamber: 64-68 (most of the time)
First time using the EcoGrower and the Magnums. As soon as the seedlings cracked a tail, I put them in the hydroton medium with a pinch of cocotek at the top to keep it moist, as I did not want to run the dripper 24 hrs.
1st problem: three days in I looked in the EcoGrow water chamber out of curiousity, smelled moldy mildew. Pulled a pot or two and found that about all of them have white powdery mildew on the cocotek liners. The water temp was to high and running near 78 deg for thre days, so panicked, and because I didnt have a water chiller, I exactoknifed a heat shield that I fit over the entire growing area that divis the heat above the seedlings from the cool air Im fanning in from the outside. Its a temp fix until I get a couple of small chillers for the 17 gal chambers.
Any recommendations or experience with anything similar here? The strains, lights, liner mildew, growing system, etc? Im gone from outdoors to indoors, and never saw much on the EcoGrower system or Bubble Ice autoflower strain, which claims 20% thc. PS - the mildew has not spread or worsened since lowering the water chamber temps to the mid to low 60's.