1800 watts Sealed and CO2 Enriched."A Teachers Learning Process"

Shrubs First

Well-Known Member
Hey guys, week 6 day 5.







Starting to pack on the weight, branches are beginning to lean and I will need a few more stakes on the
larger stalks I missed.
 

Shrubs First

Well-Known Member
their filling in nicely...so are you hand feeding all those bitches or do you have a pump or???
It's the same as it ever was.

Eco Elite 1500 GPH submersible pump with a watering wand. I have it timed out to 15 seconds per gallon.

I mix up 20 gallons for 20 plants. Each plant gets 15 seconds and it is pretty spot on. I have a res that has about 40
gallons of RO topped off at all times with a 20 gallon res to move water in to and mix nutes and apply... etc.

I let nutes mix for about a half hour and try to feed as soon as the lights come on. Takes 5 minutes to apply with my equipment. =D
 

roachclip420

Active Member
Question...I understand your reason for using 600w bulbs, but since you are using 2 mh and 1 hps have you ever thought about using 400w cmh bulbs?
 

Shrubs First

Well-Known Member
Question...I understand your reason for using 600w bulbs, but since you are using 2 mh and 1 hps have you ever thought about using 400w cmh bulbs?
400w lights just wouldn't put out the light I'm looking for, This is about a 6x8 area I'm covering and I'm actually debating stepping
the middle light up to a 1000W with two 600's on the outside.
 

roachclip420

Active Member
400w lights just wouldn't put out the light I'm looking for, This is about a 6x8 area I'm covering and I'm actually debating stepping
the middle light up to a 1000W with two 600's on the outside.
makes sense...then again what about 5-400w for 2000w? or 6 for 2400w?
 

Shrubs First

Well-Known Member
makes sense...then again what about 5-400w for 2000w? or 6 for 2400w?
When growing in smaller spaces it can be economical and more efficient to do as you say, and run higher numbers of
lower wattage bulbs. Although in my case I have more area to cover and the amount of hoods/bulbs/ballasts I would
have to purchase in order to cover the area does not save me money or up my yield. Also, spending the dollar to basically
retrofit my grow room by installing magnetic ballasts when I am a huge advocate of electronic/digital seems pointless.
The light would look good and would be very evenly distributed but it is not worth the trouble.
 

Someguy15

Well-Known Member
That's a sick piece! I need to replace my 16 arm Phire my damn cats broke... but the ladies been suckin me dry for cash lol
 

Shrubs First

Well-Known Member
Nice piece!!!
That's a sick piece! I need to replace my 16 arm Phire my damn cats broke... but the ladies been suckin me dry for cash lol
looking nice m8 looks like its gon be a good ending:weed::hump:

Thanks guys, I'm loving the piece for sure. Don't think I can hit another bong without a little disappointment.

Today I couldn't help myself, the nugs just looked so good, and I think everyday will be gettin better and better.









They are really juicin up.
 
What bulbs are you blooming with? I heard you mention that you were going to use SunMasters earlier in the thread. Have you used them before and if so, how did they perform? I am thinking about blooming with these bulbs instead of the Hortilux.
 

Shrubs First

Well-Known Member
Sunpulse, actually. They are pulse start metal halides. I have two of them at 4000K, and a HPS in the center to give em that 2700K.

Getting very very close, I'm thinkin by the end of the week?













 

farmerjoe420

Well-Known Member
nice man real frosty. does the alien og you have come in seed or clone only? that looks like what im looking for LOL. very nice bro
 
Top