Going to buy this tent, how would I go about venting?

SFguy

SFguy

Well-Known Member
lmao i didnt read the whole thing i just clicked

it looks like its flaps at the bottom are for passive, and i see a hole in the roof for your fan/ducting
 

Attachments

Brokeoldbloke

Brokeoldbloke

Active Member
I see two in the picture (top & lower rt) but according to a reviewer it has "three six inch (top right, upper left wall, lower right wall)".
 
Warlock1369

Warlock1369

Well-Known Member
Don't be afrade of cutting holes where you need them. I see light leaks are a issue so set it up have light on out side and you zip your self inside with a flashlight and some HVAC tape. In the dark tape any light you see. The flash light is so you can see the tape and get out later.
 
B

berkman858

Well-Known Member
  • 3 - (24 x 8-inch) lower ventilation slots that can be covered or opened. 2 - (3-inch diameter) utility slots. 2 - (6-inch) diameter ventilation slot.


dude, read the info in the link you posted
 
D

dskaless

Member
Just FYI the Utility slots are covered so you will have to cut through the canvas to thread cords, great little tent for the price though, just make sure you watch the stitching on the seams. I used some white caulking to get a nicer seal on them. Happy growing!
Warlock1369 said:
Don't be afrade of cutting holes where you need them. I see light leaks are a issue so set it up have light on out side and you zip your self inside with a flashlight and some HVAC tape. In the dark tape any light you see. The flash light is so you can see the tape and get out later.
Click to expand...
Great info on the HVAC tape I'll have to do that.
 
You must log in or register to reply here.
Top