JMD
Well-Known Member
They cost roughly 1150 USD.
Best LEDs today? Share info!
- Thread starter JMD
- Start date
JMD
Well-Known Member
Feel free to ask any question you might have. I know a fair bit about optoelectronics and quite a lot about electronics in general, but the purpose of this thread is to crowd-source the search for good LEDs.
I'm currently trying to organize the specs of many LEDs in a spreadsheet, so it's easier to choose which LEDs suits different purposes.
smokingrubber
Well-Known Member
I'm also looking for good information on LEDs. I've been happy with my HID setup, but I'm wondering if the LED technology has advanced enough to finally compete at the judges table. I know there are energy savings, but does the final product hold its own against HID? I'm looking forward to seeing your spreadsheet of different purpose LEDs, but I'm hoping you highlight the LEDs that are best for OUR purpose.
Rrog
Well-Known Member
Smokingrubber- I think panels with enough juice will hold their own. I think part of the problem is DIY panels are sometimes low power. Based on Rives recommendation, I built a 300W panel, and things have been lush and colas abound. Here's one 4 weeks after flower. Vegged and flower under LED:
An earlier pre-flower pic. They're dense
An earlier pre-flower pic. They're dense
JMD
Well-Known Member
It takes a bit of time, due to incomplete datasheets. If for example they say the LED will deliver 100 lumen at 350 mA, but it's otherwise rated to 1500 mA, then I have to look at graphs and estimate the output at 700, 1000 and 1500 mA.
The idea is that you can choose from a drop-down menu whether to see 350, 700, 1000 or 1500 mA specs - and then compare all the LEDs.
Looks VERY good mate!
guod
Well-Known Member
JMD
Well-Known Member
Very nice, I will use that for the Cree LEDs. Thanks! Keep the info flowing
Rrog, very nice! Have you done any estimates for umol / area / s^2 with that panel?
guod, absolutely fantastic link! Thank you! Quite revealing, it seems that there exists a bin P4 for XP-E2 reds already. And XM-L red too?
JMD, that spreadsheet would kick ass, especially if combined with radiometric output figures, efficiencies and maybe Inada/Tazawa "corrected" figures too! Check knnabinoides work, maybe it could work as a starting point.
I know there was an online tool for calculating umol values and combining different leds for visual spectrum charts. Too bad I have forgotten where I found it. Address was somethingsomething.co.jp if I remember correctly? Please post a link if you know it or find it!
guod, absolutely fantastic link! Thank you! Quite revealing, it seems that there exists a bin P4 for XP-E2 reds already. And XM-L red too?
JMD, that spreadsheet would kick ass, especially if combined with radiometric output figures, efficiencies and maybe Inada/Tazawa "corrected" figures too! Check knnabinoides work, maybe it could work as a starting point.
I know there was an online tool for calculating umol values and combining different leds for visual spectrum charts. Too bad I have forgotten where I found it. Address was somethingsomething.co.jp if I remember correctly? Please post a link if you know it or find it!
ya bongo
Well-Known Member
That spreadsheet has â name "Ledengin spectrum Tool"
My Bookmarks...
http://www.ledspecs.com/
http://www.1023world.net/diy/spectra/
http://www.buildmyled.com/custom-led-strip/
yabo
JMD
Well-Known Member
First beta (alpha maybe..) of the spreadsheet is ready. There's still a lot of stuff I want to add, but first some feedback from you guys 
So idea, comments and what else you might think off - let it rip!
In cell O3 you can choose to look at 350 mA, 700 mA, 1000 mA or 1500 mA specs. The spreadsheet will update automatically according to the filters you have in column B to L.
For example: You choose to only see LEDs with an output at 700 mA (it will hide whichever LEDs won't work at 700 mA) and you choose to sort according to Flux/watt. The spreadsheet will then show you the best LED in the database.
So idea, comments and what else you might think off - let it rip!
In cell O3 you can choose to look at 350 mA, 700 mA, 1000 mA or 1500 mA specs. The spreadsheet will update automatically according to the filters you have in column B to L.
For example: You choose to only see LEDs with an output at 700 mA (it will hide whichever LEDs won't work at 700 mA) and you choose to sort according to Flux/watt. The spreadsheet will then show you the best LED in the database.
JMD
Well-Known Member
I think Open Office is able to open it as well.I encourage to use another format, not all of us use m$ products.
JMD
Well-Known Member
If you got LEDs you want added, just post the link to the datasheet here and I will add them.
I will work on calculating the PAR output.
Rrog
Well-Known Member
Cree XM-L www.cree.com/~/media/Files/Cree/LED Components and Modules/XLamp/Data and Binning/XLampXML.pdf
Unless that's old news and you're staying with just cutting edge. For my next panels, what I don't know is if it may be better to use last generation LEDs for the savings, vs. new generation for output / efficiency. Too complicated to add prices to your spreadsheet, I was just making the case for listing 1 gen old LEDs that are popular so I could compare new to almost new tech
Unless that's old news and you're staying with just cutting edge. For my next panels, what I don't know is if it may be better to use last generation LEDs for the savings, vs. new generation for output / efficiency. Too complicated to add prices to your spreadsheet, I was just making the case for listing 1 gen old LEDs that are popular so I could compare new to almost new tech