And so it begins!!!

toolage

Well-Known Member
:joint:yeah i filled the other pots up with hydrocks!!!:joint:

edit: how far is your HPS from your seedlings, inches/feet wise?
 

email468

Well-Known Member
:joint:yeah i filled the other pots up with hydrocks!!!:joint:

edit: how far is your HPS from your seedlings, inches/feet wise?
Light can get through the hydroton - you should put a piece of panda plastic on top of them (that's what i do).
It is a 600w HPS and a 400w MH (so 1000w total) which i keep about 3 feet away from my little seedlings. as they get bigger - i'll let it get within 2 feet.
 
Last edited:

Alto

Well-Known Member
I never used HPS on seedlings, so I can't say.
Are you going to air cool the light this time around?
 

toolage

Well-Known Member
I never used HPS on seedlings, so I can't say.
Are you going to air cool the light this time around?
yeah i'm buying a 6" inline fan that's going to suck heat off the light and suck air out of the closet. And I'll be making a homemade carbon scrubber to go outside of the room.:mrgreen: this is going to be a much better grow this time around!
 

toolage

Well-Known Member
Light can get through the hydroton - you should put a piece of panda plastic on top of them (that's what i do).
It is a 600w HPS and a 400w MH (so 1000w total) which i keep about 3 feet away from my little seedlings. as they get bigger - i'll let it get within 2 feet.
Mines like 4 feet away, do you think thats too far? mines a 400w hps
 

email468

Well-Known Member
Mines like 4 feet away, do you think thats too far? mines a 400w hps
better safe than sorry OTOH - you don't want them stretching - especially using an HPS! - you can probably bring it closer. just keep a careful eye on them little babies!
 

toolage

Well-Known Member
sorry didn't read that top part of your first comment.

what's panda plastic, where can i get it? can I use cardboard?
 

email468

Well-Known Member
sorry didn't read that top part of your first comment.

what's panda plastic, where can i get it? can I use cardboard?
panda plastic is that white/black poly - but any opaque, water-proof material will do the trick. it isn't necessary but if you note any growth in your res - then that is something you'll want to take care of... you can get panda plastic at gardening/hydro stores.
 

toolage

Well-Known Member
panda plastic is that white/black poly - but any opaque, water-proof material will do the trick. it isn't necessary but if you note any growth in your res - then that is something you'll want to take care of... you can get panda plastic at gardening/hydro stores.
ahhh sweet i'll def keep an eye on the res. I had it filled with hydrocks whenever stretch was in flowering and didn't have a problem with algae build up, but we'll see.

I also sat the resevoir on top of a tote. It's about 7 inches closer to the light. I also have a fan blowing directly over the seedling.
 

toolage

Well-Known Member
looking lots better toolage.
glad to see this one moving along already bro
thanks bro, I'm even more excited about this low ryder DWC grow!!!! ahh i can't wait! I definently had to get this on the road, can't hand feed the plants while I'm at the wedding.

Im ordering the inline fan right before I leave for the wedding and hopefully will be here by monday or tuesday!! Do I have to order anything else along with that inline?? Accessories or anything?
 

kochab

New Member
thanks bro, I'm even more excited about this low ryder DWC grow!!!! ahh i can't wait! I definently had to get this on the road, can't hand feed the plants while I'm at the wedding.

Im ordering the inline fan right before I leave for the wedding and hopefully will be here by monday or tuesday!! Do I have to order anything else along with that inline?? Accessories or anything?
Not that I can think of. You have a glass plate on your reflector....you can get vent hose and tape for that @ the hardware store. Pick up some c hooks that screw in places as well (like the ones people use to mount lights by screwing the hook in by hand). Some wire coat hangers or some other type of pliable wire to hang the vent hose up off the floor and near the ceiling somehow with.

That should be it.
And whatever you do never order from these folks.
Sea of Green
I should have stuck with htg, these new fuckers I tried left out/or damaged over half my damn order.:evil::evil::evil:
 

toolage

Well-Known Member
Not that I can think of. You have a glass plate on your reflector....you can get vent hose and tape for that @ the hardware store. Pick up some c hooks that screw in places as well (like the ones people use to mount lights by screwing the hook in by hand). Some wire coat hangers or some other type of pliable wire to hang the vent hose up off the floor and near the ceiling somehow with.

That should be it.
And whatever you do never order from these folks.
Sea of Green
I should have stuck with htg, these new fuckers I tried left out/or damaged over half my damn order.:evil::evil::evil:
yeah imma stick with HTG. thanks for the heads up! ahhh i'm ready to see the potential of this grow!
 

kochab

New Member
yeah imma stick with HTG. thanks for the heads up! ahhh i'm ready to see the potential of this grow!
much welcomes brother.
Im starting to see the potential in my own this year as well.
Here are my 4 pure sativa plants @ a month- 1 & 1/2 months old. They are an old bagseed Ive been making seed of for a while so I can keep them around because I like them.


Hopefully Ill be able to feed them more vigorously with some better nutes again. I ran out right before this grow and had to use some cheap shit.:(
 

toolage

Well-Known Member
much welcomes brother.
Im starting to see the potential in my own this year as well.
Here are my 4 pure sativa plants @ a month- 1 & 1/2 months old. They are an old bagseed Ive been making seed of for a while so I can keep them around because I like them.


Hopefully Ill be able to feed them more vigorously with some better nutes again. I ran out right before this grow and had to use some cheap shit.:(
hell yeah bro i can't wait to come out there! i've been following your journal daily, i just don't understand all the errors yet lol! But bro keep up the great work man expect my PM as soon as I get back! take it easy brother!
 

kochab

New Member
hell yeah bro i can't wait to come out there! i've been following your journal daily, i just don't understand all the errors yet lol! But bro keep up the great work man expect my PM as soon as I get back! take it easy brother!
What errors? Is the site fucking up or something?
Ill be on the lookout for the pm man, Have a great trip and return home safely:mrgreen:
 

toolage

Well-Known Member
What errors? Is the site fucking up or something?
Ill be on the lookout for the pm man, Have a great trip and return home safely:mrgreen:
everytime I try to hit reply it never sends me there it sends me back to the home page. So I've just been sitting back and reading lol!! Thanks bro, I"ll try and make it home and one piece.

I second that. Have a great time toolage.
I'll try lol, I hate weddings!

yeah...i third that :D have a nice trip dude :D and kiss the bride from the Cheetah :D lol
LMFAO! I'll see what I can work out! A lil alchahol will ease everyone up lol! I LOVE THE NEW AVATAR!
 
Top