YosemiteSam78
New Member
Hi guys.
My plants have just recovered from a blunder of accidentally turning off the air pump and things were great, there was much rejoicing and inappropriate touching of leaves in my garage.
I noticed 4 days ago that the plants started stinking big time and they were coated by an almost invisible layer of resin, not looking like mold or anything - but boy they were sticky and would leave a smell on my hands big time. The stickyness has passed, but today I noticed this crap on one of my plants. I've checked for caterpillars, larvae and mites, nuttin there.
You think this is molding or are these fan leaves just about to quit or wtf is going on? It doesnt look like any of the nute deficiency pics or charts that I have seen. Any input is highly appreciated!
![20131118_211838.jpg](/data/attachments/2037/2037065-e94ef0ca29537ddaec1ad9ed0716522d.jpg)
This is my setup:
Grow cab size (covered in mylar from top to bottom, air tight and isolated with 0,4 inch styrofoam)
5 ft height (1,5 foot is used for tech room + propagation room)
1,5 ft depth
3,2 ft in lenght
400 watt MH with cooltube
2 40 watt cfls 6700k (hanging in each ends)
2 240v fans for inlet in bottom of cabinet
1 110 cfm extractor fan with carbon filter
2 diy dwc rubber maids with 3 pots each
4 air stones + Eheim 400 air pump
2 25 watt aquarium water heaters
Temps are between 18-25 degrees Celsius an RH is between 35-50%
My plants have just recovered from a blunder of accidentally turning off the air pump and things were great, there was much rejoicing and inappropriate touching of leaves in my garage.
I noticed 4 days ago that the plants started stinking big time and they were coated by an almost invisible layer of resin, not looking like mold or anything - but boy they were sticky and would leave a smell on my hands big time. The stickyness has passed, but today I noticed this crap on one of my plants. I've checked for caterpillars, larvae and mites, nuttin there.
You think this is molding or are these fan leaves just about to quit or wtf is going on? It doesnt look like any of the nute deficiency pics or charts that I have seen. Any input is highly appreciated!
![20131118_211838.jpg](/data/attachments/2037/2037065-e94ef0ca29537ddaec1ad9ed0716522d.jpg)
This is my setup:
Grow cab size (covered in mylar from top to bottom, air tight and isolated with 0,4 inch styrofoam)
5 ft height (1,5 foot is used for tech room + propagation room)
1,5 ft depth
3,2 ft in lenght
400 watt MH with cooltube
2 40 watt cfls 6700k (hanging in each ends)
2 240v fans for inlet in bottom of cabinet
1 110 cfm extractor fan with carbon filter
2 diy dwc rubber maids with 3 pots each
4 air stones + Eheim 400 air pump
2 25 watt aquarium water heaters
Temps are between 18-25 degrees Celsius an RH is between 35-50%