Search results

I'm not sure what you're referring to in the first question... If you don't use those chemicals then you shouldn't worry about them in your product but you will probably need to monitor how much mold and other natural contaminants you will be exposed to as there are some Mycotoxins that are...

PDF: https://www.jstage.jst.go.jp/article/jts/40/6/40_797/_pdf

"Most hash processing uses large quantities of water which could potentially wash away pesticides which are water soluble while the non-water soluble cannabinoids remain behind." Like I said before there is far less chance of concentrating anything that is on the surface of the plant when you...

Yup that's the one I'm leaning towards. With your budget I would say you could go with the 20t and some 5x3.5in plates. I did forget to mention that the numbers are for pressing flowers. Hash and kief will require less pressure but flowers produce the best results and efficiency for production...

From my research on the subject you get the best bang for your buck if you get a hydraulic/pneumatic H-frame shop press from a reputable brand(Baileigh, Dake Corp, or others) Here is a pretty good consensus on temps and psi: Psi is Pounds per Square Inch so if you have 16in X 20in plates the...

Ha... I was very tempted to comment on that.

There is a lot to be said about DIY as I make my own clone machines and tumblers but sometimes I don't want to fiddle around with things like sewing little mesh bags and learning how to mill steel and aluminum to make platens for my press. Sometimes it's better to let other people do the R&D and...

Dry sift works great too. Just try to minimize the dry ice sift when doing trim. I did dry ice sift with nug and it turned out pretty awesome still. Took an ounce of nug to rosin in about 30 minutes or less. We were just chillin so we weren't really rushing it. Do separate runs. Sift for 30...

Haha I've been using the wet 2 straight for some time now. Outlasted many others. Problem is the holes in the iron and channels. That being said I can press about 10gs of flower at a time and get 1.6-2gs of return from some outdoor organic nug from this summer. I use a desktop vice from ACE and...

That's a pretty good return and some fire looking rosin. I believe the press your talking about is sold by Medisun Farms: http://www.medisunfarmsconcentrates.com/product/oil-press/ Pretty solid setup. Of course if you piece it together you could get it for much cheaper. But that would mean...

I've had a lot of really good luck with aero cloners. The only time I had a problem was with temp. If you use RO water for the first week and clean it every new run then you really only need to be worried about the temps(some additives can be beneficial). Summer time, don't let it get too hot...

Super stoked to give this a try tonight. Been holding onto so fresh frozen trim to do bubble with but just haven't had the time.

So you dry ice sift the fresh frozen material? Does this give you a good yield and are there any downsides to it? You should try a desktop vice $30 at Ace. Will really save your body from all that pressing and give you more energy to put into other parts of your process. If you like the...

7 days is the fastest I've gotten roots in the aero cloner. The bigger ones do root first usually but I attribute that more to the amount of exposed cambium at the cutting site(the thicker the stem the thicker the cambium layer is). If you give it a very hard angle when you cut then you have...

Upon further investigation I found that you can block your camera on you iphone from collecting your location all together. Which I guess I had done when I first got my phone.(I'm paranoid, did I mention that?) Go to: Settings > General > Restrictions > Location Services > Camera(or which ever...

First I wondered if a screenshot would keep the metadata but it would only change the location I believe not delete the info all together. I also read that safari does it by default. Check out this site, shows you all the metadata and more. http://fotoforensics.com/faq.php "During the file...

I've used my outdoor organic nugs and got a 16% return. This is good considering I wouldn't think they are any higher than 12-15% THC. So I would say that as long as you have something over 8% you should get a decent return. Have you tried the garlic press tech? Take some parchment and wrap 5...

I am on the same boat of more flavor = more better. I would suggest trying to use a oil-slick style silicone pad to squish with then freeze and collect, because it is way easier to collect the entire product especially with a sappier consistency. Then keep it in a silicone container afterwards...

I definitely was not claiming this to be an ideal situation. My intentions were to provide people with an experience that I trouble shot and found a resolution to. I have had 100% success with both rockwool and aero cloning yet I prefer the aero cloner method over rockwool for many reasons. When...

I find that if you let the slabs sit without the top touching the parch you will degass some of the more volatile molecules and get a pretty stable product. However you are getting close to a BHO like purge by letting your terps vape for a long period of time and letting some of that flavor town...