Search results

  1. zangtumtum

    Introducing CobKits.com - specializing in DIY and Citizen COBs

    Good to see you back CobKits. nice engine I'm back too
  2. zangtumtum

    New Light

    ESP8266 and ESP32 they are very interesting to develop something I follow the project
  3. zangtumtum

    Big COB Setup: the annoying question.

    if I can afford a suggestion, it could be interesting if you are in Italy: http://www.spectradesignlab.com/ you can use their solutions or ask or be offered a custom solution based on your production needs tending to your budget I hope it was useful
  4. zangtumtum

    the HLG-600H thread

    Thank you CobKits
  5. zangtumtum

    the HLG-600H thread

    Thank you CobKits, in fact I had read this warning / limitation on your site and I was looking for confirmation in my set with 9 Vero29D. About the fuse speech, do you consider it valid or obsolete in front of a 36V driver wiring in parallel? I do not see many alternatives to drive 9xVero29D...
  6. zangtumtum

    the HLG-600H thread

    I bump this thread because I have similar question like goofy81 ask in 2016 about fuse and protection,if have sense. someone have test HLG-600H-36v and Vero29 D? my intention it's to put 9xVero29D on one HLG-600, it's possible to get 1850mA for cob? (Vero29D at Tc 25°c =37,2v : at Tc...
  7. zangtumtum

    Citizen CLU048-1216?

    a question, on simulator 1216 at 1750mA at Tc° 25C° = 35.8v it's possible to fit n.4 1216 on MeanWell HLG-240H-C1750B (143v not open)? 1216 x 4 = 35.8v X 4 = 143.2
  8. zangtumtum

    i haz the dumb....wire removal BJ holders.....

    simply rotate the solid wire clockwise and counterclockwise gently and you can remove... and reuse/recycle the holder....
  9. zangtumtum

    Anybody tried the ELG version of Meanwells, Rather than HLG...

    I use on 220v ELG-100-C1400B and ELG-240-C1400B,I can confirm the voltage in spec and they are very stable. The voltage are similar to HLG but not the same. The drivers can dimm from 0% to 100%, at 0% are completely off, different form HLG that can dimm from 10% to 100%. ELG-100-C1400B in my...
  10. zangtumtum

    LED Companies w/ LINKS

    Nice as always SDS! Welcome back!
  11. zangtumtum

    Lens discoloring my heat sinks

    Hard anodizing produce 30 micron layer if you respect the righ time of the process, if you are under, near 5/10 micron, probably too fast process, and a thin layer in teory can do that type o damage on prolonged exposure to heat and light.
  12. zangtumtum

    Matching Drivers and COBs

    I suppose the same...with Vero 29 D > n.4 on HLG-240H-1750B kick to max 1050mA... like hardcap of the driver...
  13. zangtumtum

    Matching Drivers and COBs

    can anyone confirm that n.4 citi CLU048-1212C4-353M2K1 are fine for HLG-240H-1750B at max power? if i see simulator voltage at Tc 50° it's between 37.0 and 37.4v... on calculator total voltage Tj 50 = 147.92v thank you
  14. zangtumtum

    Vero 29 ?

    I'm tested HLG-240H-C1750B, can run only n.3 Vero29 gen7 to get 200 watt total at max, if you put n.4 Vero,the driver kick to 143/145watt total at max.
  15. zangtumtum

    ...All Things Vero...

    Something is moving in Bridgelux,today,finally, the first page of VERO features updated with new data: - Market-leading efficacy, 155 to 177 lm/W typical - Lumen output: From 520 to 37,260 lumens
  16. zangtumtum

    Which is best red single color actually ?

    no doubt: Luxeon Rebel ES - 630nm - LXM2-PD01-0050 Luxeon Rebel ES - 660nm - LXM3-PD01-0300 single or array, search only this bin.
  17. zangtumtum

    ...All Things Vero...

    Bridgelux declare to release the new version in June, I do not know, however,when released the new complete datasheet, for now:
  18. zangtumtum

    i reply

    i reply
  19. zangtumtum

    mail to zangtumtum@hotmail.com if you want thank you

    mail to zangtumtum@hotmail.com if you want thank you
  20. zangtumtum

    the fan, is attacked at its dedicated small power supply. first check that the blades are in...

    the fan, is attacked at its dedicated small power supply. first check that the blades are in axis and revolve smoothly, then also that the supply wires (blue brown) are attacked and balances to wago connection, then checking the connections between fan and small power supply (4 pins connection)...
Top