1000w bare bulb how to cool

Csar

Well-Known Member
have a cabinet in garage I want to flower out of it is4'×4'×8' I have a 1000w bare bulb I wanna use any.ideas how to cool a bare bulb or sshould.I just use 400w cool tube
 

justugh

Well-Known Member
have a cabinet in garage I want to flower out of it is4'×4'×8' I have a 1000w bare bulb I wanna use any.ideas how to cool a bare bulb or sshould.I just use 400w cool tube
cool tube will do a better job then anything u are going to jerry rig up

just so u know the cool tube is a hood it can use any type of single end bulbs......it uses a S plug that goes into the ballast and that dicktates what bulb u use (so if u upgrade ballast to 600w or 1000w later u can still keep the same hood)

plus a cool tube is 6 inches that is a 400 cfm inline fan or a 240 booster fan ........that little ramble all means cool tube
https://www.amazon.com/Powermaxx-GLX-CTH6-Cool-Light-Reflector/dp/B00QQUWQ6E

this is my fav hood
 

Roger A. Shrubber

Well-Known Member
cool tubes are the shit, with a little careful work you can take the interior reflector out and use them to grow vertically as well
 

r.i.kid

Well-Known Member
cool tube will do a better job then anything u are going to jerry rig up

just so u know the cool tube is a hood it can use any type of single end bulbs......it uses a S plug that goes into the ballast and that dicktates what bulb u use (so if u upgrade ballast to 600w or 1000w later u can still keep the same hood)

plus a cool tube is 6 inches that is a 400 cfm inline fan or a 240 booster fan ........that little ramble all means cool tube
https://www.amazon.com/Powermaxx-GLX-CTH6-Cool-Light-Reflector/dp/B00QQUWQ6E

this is my fav hood
That's iffy advice....the hoods cord could be rated for 400w...as in a thin cord. and you're telling him to run 1000w thru it....fire waiting to happen. just saying
 

Roger A. Shrubber

Well-Known Member
wasn't aware they did that, i have 2 different hoods and 2 cool tubes and they all have the same cord.
that could be an issue. i'd try it and keep an eye on the cord for a day or two, if it seems to be getting hot,
i'd rewire it with the right size wire, pretty easy d.i.y. job.
 

r.i.kid

Well-Known Member
wasn't aware they did that, i have 2 different hoods and 2 cool tubes and they all have the same cord.
that could be an issue. i'd try it and keep an eye on the cord for a day or two, if it seems to be getting hot,
i'd rewire it with the right size wire, pretty easy d.i.y. job.
so you don't think I'm b.s. you....20161128_100024.jpg 20161128_100013.jpg
 

r.i.kid

Well-Known Member
wasn't aware they did that, i have 2 different hoods and 2 cool tubes and they all have the same cord.
that could be an issue. i'd try it and keep an eye on the cord for a day or two, if it seems to be getting hot,
i'd rewire it with the right size wire, pretty easy d.i.y. job.
you can't really tell but there's a big difference
 

Roger A. Shrubber

Well-Known Member
i can see it, and i believed you, was just sayin mine are all the same. for all i know mine are all rated for 600, thats the biggest ballast i have.
 
Top