ilikecheetoes
Well-Known Member
i have a 10x10x7 tent
4 x 1000whps
8" air cooled reflectors
hole in tent <- 6" fan <- phresh filter
hole in tent <- 8" fan <- lights <- phresh filter
Room temp is 75f. Tent quickly goes to 87f with lights on.
Running 3 ballasts at 75% (dimmable) temps stay around 83f.
So since fucking with that ducting is such a pita before I start I thought I'd get suggestions.
if my calculations are correct 10x10x7=700 cubic feet.
700/3 233cfm worth of fans to exchange the air every 3 minutes.
So with that my single 6" fan should be able to vent the tent itself every three minutes. Should I get rid of the 8" filter and just run a loop through the lights and back out? The filter is rated to the fan so I wouldnt think it was slowing things down.
4 x 1000whps
8" air cooled reflectors
hole in tent <- 6" fan <- phresh filter
hole in tent <- 8" fan <- lights <- phresh filter
Room temp is 75f. Tent quickly goes to 87f with lights on.
Running 3 ballasts at 75% (dimmable) temps stay around 83f.
So since fucking with that ducting is such a pita before I start I thought I'd get suggestions.
if my calculations are correct 10x10x7=700 cubic feet.
700/3 233cfm worth of fans to exchange the air every 3 minutes.
So with that my single 6" fan should be able to vent the tent itself every three minutes. Should I get rid of the 8" filter and just run a loop through the lights and back out? The filter is rated to the fan so I wouldnt think it was slowing things down.