10x5 2000w hps

im used to a 1000 watt in a 1m x 1m x2m tent, small fans in celing of tent to lower heat, uk is cold most of the year. 9 clones per tent. sadly ive never weighed out the grow from any of my grows, not on total weight anyway
 
go go kid said:
im used to a 1000 watt in a 1m x 1m x2m tent, small fans in celing of tent to lower heat, uk is cold most of the year. 9 clones per tent. sadly ive never weighed out the grow from any of my grows, not on total weight anyway
Click to expand...

Yes uk myself fingers crossed my 8inch fan can get rid of heat quick in the summer, whats the max temps your tent gets up to please
 
Few the seeds have came out already, potted a couple more up also the environment in the propogator
 

Attachments

  • 20230421_133534.jpg
    20230421_133534.jpg
    1.9 MB · Views: 6
  • 20230421_133522.jpg
    20230421_133522.jpg
    1.6 MB · Views: 6
Nearly have enough for my next run now..
Still havnt plugged the heated propagator in as of yet..

will that get them growing a bit faster?
Once i have plants big enough to take clones i will to side by sides in each propogator with heat and no heat.
 

Attachments

  • 20230423_181933.jpg
    20230423_181933.jpg
    3 MB · Views: 9
  • 20230423_182107.jpg
    20230423_182107.jpg
    3.6 MB · Views: 9
  • 20230423_181957.jpg
    20230423_181957.jpg
    3 MB · Views: 6
So the seeds went in bin with my heating needing repaired and also my shower.

So binned and started over

I have
9 gelato 45
9 runtz x layer cake
1 glukies (s1 i made that iv never tried)

I have the fan blowing on the side wall lower then the trays to strengthing the stems

Would it be ok to add nutes now
 

Attachments

  • 20230522_074005.jpg
    20230522_074005.jpg
    7.3 MB · Views: 9
  • 20230522_074031.jpg
    20230522_074031.jpg
    7 MB · Views: 9
  • 20230522_074043.jpg
    20230522_074043.jpg
    7.8 MB · Views: 5
Little update on the seeds, much better then previous attempts will pot them up in next few days into summit a little bigger before there final 8.5ltr pots

0.7 ec 5.9ph 60ml a day with syringe
 
budolskie said:
Well first attempt at a journal,

Upgrading from a 8x4 with 2x600w hps to a 10x5 with 2x1000w hps....

Still using my 8" rhino fan

Just busy setting finishing setting it tomorrow, need to hang the lights and place trays in

Coco perlite 60/40
Shogun nutes
Coco a&b
Cal mag
Silicon
Active boost
Pk
Buddha tree flower burst

Going to pick 18 out of this bunch of clones
Click to expand...
someone after my own heart, am using 2 1000 watt hps cooltube, 2 led350watt sun bright as side lighting, and i think its a 100 watt bloom led over a slower grower, hope to see pic when you set it up, what fan system are you using
 
sicpuppy said:
someone after my own heart, am using 2 1000 watt hps cooltube, 2 led350watt sun bright as side lighting, and i think its a 100 watt bloom led over a slower grower, hope to see pic when you set it up, what fan system are you using
Click to expand...


An 8 inch rhino can fan theres picture on the first page and a 6 inch rhino for intake to a rhino temp controller
 
Set the tent back up and put 1 deck drain to 1 tray need a washer to do the other drain and tray.

Gona let the run off run to a condensate pump and be pumped down the drain out side of grow room
 

Attachments

  • 20230529_173901.jpg
    20230529_173901.jpg
    1.7 MB · Views: 5
  • 20230529_173906.jpg
    20230529_173906.jpg
    1.2 MB · Views: 5
  • 20230529_173920.jpg
    20230529_173920.jpg
    1.6 MB · Views: 7
  • 20230529_173852.jpg
    20230529_173852.jpg
    7.3 MB · Views: 7
  • Screenshot_20230529_181255_eBay.jpg
    Screenshot_20230529_181255_eBay.jpg
    896.8 KB · Views: 7
Kola_Kreator said:
What happened on your first run?
Click to expand...


Had a shit year or so after a neighbour flood with big tent up and down, then needing repairs in my house..... last run i flowerd straight from clone and when i changed tent humidity shocked them i cut the tops off and yeild was lower then normal but still fire smoke... fingers crossed i get back into my routine like old 8x4
 
budolskie said:
Had a shit year or so after a neighbour flood with big tent up and down, then needing repairs in my house..... last run i flowerd straight from clone and when i changed tent humidity shocked them i cut the tops off and yeild was lower then normal but still fire smoke... fingers crossed i get back into my routine like old 8x4
Click to expand...
Good luck for this run mate. If you set up your Coco on an auto water system and water every hour your lights are on the transpiration from your plants will create a lot of humidity. Then you just need to make sure you have enough airflow moving through to compensate and set the humidity where you want it. An 8 inch fan with built in humidity control is probably the go.
 
Kola_Kreator said:
Good luck for this run mate. If you set up your Coco on an auto water system and water every hour your lights are on the transpiration from your plants will create a lot of humidity. Then you just need to make sure you have enough airflow moving through to compensate and set the humidity where you want it. An 8 inch fan with built in humidity control is probably the go.
Click to expand...


I have a humidistat and humidifier aswell just never used them yet, once i get this condensate pump set up and the run off pumping away fine il do the auto feed, i have the manifold and everything built and the lines
 
You must log in or register to reply here.
Back
Top