400w Club-Show Off Your 400w Pride And Joy

smoove

smoove

Well-Known Member
golddog • ItsFourTwentySomewhere • rlourens • HoLE • MileHIGHclub101

Thanks for all the kind words fellas.

The Camera is just a point and shoot digital Canon Powershot SD990 IS. I use all the customizing features I can: White Balancing, Color, Exposure, ISO, Macro etc... I pretty much just played with the camera till the shots came out I wanted. I don't think I can really get specific unless you have the same camera. Sometimes I change all the settings before I take every shot, constantly tweaking and just hoping a good shot comes out.

The Cab is similar to THIS, is roughly 2' X 3' X 7' and was modded to accommodate a grow. I cut my own holes for exhaust duct tubing at the top, a few passive intake holes at the bottom, covered with mylar, sealed for light proofing, and added some hooks for hanging.


:leaf:
 
smoove

smoove

Well-Known Member
Integra21 said:
Thats what plants look like when they are under Ideal conditions from start to finish. Great Job. Always nice to see a fellow Scroger, Juust hope the current round turns out as nice as yours. Keep up the fantastiic work. Are you fromanother site? That looks to dialed in for you to be a new grower.
Click to expand...
Thanks Integra. Yea I've jumped around here and there on a few forums, and have been growing seriously for about 4 years now. (but planted my first seeds like 15 years ago) Thanks again.

:leaf:
 
Integra21

Integra21

Well-Known Member
smoove said:
Thanks Integra. Yea I've jumped around here and there on a few forums, and have been growing seriously for about 4 years now. (but planted my first seeds like 15 years ago) Thanks again.

:leaf:
Click to expand...
If you get bored and want to look at onther scrog, The link in my sig is for my journal. Most people seem to atleast look at the pics, since there is a lot to read. I am really impressed with your buds. Gonna try to match it on health and quality.
 
Integra21

Integra21

Well-Known Member
I just upgraded to the 600w club, but thought you guys might want to see the new setup. Wont put them all up, more pics in the journal in the sig.
 
filter funker

filter funker

Active Member
MileHIGHclub101 said:
The Haze is probably going to be the most problematic for you...as you probably know haze is known for its stretching but at this point you could still be able to tie her down and create more light to the lower buds in the process... the main stem is still pretty pliable and you can train her to grow out and not so up if you choose so its a matter of drilling some holes in the top lips of your pots and anchor it down and if it grows out from there just continue tying down around the pot.
Click to expand...
Ahhhh ya iv'e done that with another plant of mine when it was younger. I'll tye this bitch down and see if she submits...:fire:

Thanks for the help!
 
Kriegs

Kriegs

Well-Known Member
Well, I don't have anything like that yet... but here's my one bubblelicious at 2 weeks post 12/12. And four superskunks I started under 12/12 to replace three others that went male..
 

Attachments

golddog

golddog

Well-Known Member
Looks like it would work for you.

Here is what I got, but includes a filter.

4" INLINE FAN CARBON FILTER COMBO ODOR CONTROL SCRUBBER

search for it on ebay.

This guy sells all kinds of stuff you might want at his store.

http://www.yescomusa.com/home.php

Quick Service, they are on the west coast, if that matters to you.

Peace - :joint::peace:
 
Jerry Garcia

Jerry Garcia

Well-Known Member
I have a 360w HPS conversion bulb (running in my 400w MH ballast) that I use in a 6" air cooled reflector. I use a 250cfm 6" inline duct fan to cool and it works like a champ. Mine is pretty much the same as the one in your link, but is 90cfm higher and cost $27 at Home Depot (well I guess it was closer to $30 because I had to purchase a plug).

Anyway, I think the more cfm you can get the better your system will work. The 250 works great for me...
 
J

jkmovies

Active Member
ItsFourTwentySomewhere said:
To y'all who're cool tubing your lights, how many CFM would you recommend for this scenario?

400w HPS, no filter attached, two bends (in thru the back side, out thru the top), 6" ducting with light traps outside the box.

ETA: Will this one be enough?
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=390127340450&ssPageName=STRK:MEWAX:IT

Thanks in advance.
Click to expand...
That's a very week fan. Actually, it's meant to boost your existing fan. But you knew that.
 
You must log in or register to reply here.
Top