8x CXB3590 panel: drivers?

Following realstyles led panel build, however I don't really want to dim them, he does this because he was facing a huge heatwave and I'm not super concerned about that.

I'm looking to run them harder because I want to maximize the grow and keep plants warmer during winter.

Anyone have an idea of the drivers I should get to run 8x 3590s harder?

(I want to run 72v cobs)

https://www.rollitup.org/t/diy-leds-how-to-power-them.801554/

Try reading more than you type.

Seriousbuds said:

Following realstyles led panel build, however I don't really want to dim them, he does this because he was facing a huge heatwave and I'm not super concerned about that.

I'm looking to run them harder because I want to maximize the grow and keep plants warmer during winter.

Anyone have an idea of the drivers I should get to run 8x 3590s harder?

(I want to run 72v cobs)

Click to expand...

THIS thread has some common matchups

A very common setup is ( 8 ) cxb3590 72v run on (2) MW hlg185h-c700a , 4 cobs in series per driver. Each cob runs at about 50w.

The problem with running the 72v harder than that is that you begin needing a lot more drivers. hlg185h-c1050a only runs 2.6 cobs. You may want to research availability of the new hlg240h-c1050

Bonjour
I believe he is going to be ok with the hlg-185-700b since Realstyle run his @350mA and less...
After it is depend on the size of your grow room!
Do you aim for 3500ºk cd?
Have a nice day!

littlejacob said:

Bonjour
I believe he is going to be ok with the hlg-185-700b since Realstyle run his @350mA and less...
After it is depend on the size of your grow room!
Do you aim for 3500ºk cd?
Have a nice day!

Click to expand...

Definitely aiming for 3500k CD.

Size of my grow room is 2x4x5.

Growmau5 said:

THIS thread has some common matchups

A very common setup is ( 8 ) cxb3590 72v run on (2) MW hlg185h-c700a , 4 cobs in series per driver. Each cob runs at about 50w.

The problem with running the 72v harder than that is that you begin needing a lot more drivers. hlg185h-c1050a only runs 2.6 cobs. You may want to research availability of the new hlg240h-c1050

Click to expand...

Oh shit - that would make it prohibitively more expensive. Thanks for pointing this out.

Any idea why I shouldn't just do 36v instead of 72v, if the 72v are so hard to optimize?

Seems like I could pack more on a single driver especially if I went for the newer HLG-240H-C700..

But this is where it all gets confusing for me (36 vs 72)

Thanks for everyone's help in here, I couldn't find my ass from a hole in the ground without your help!

Bonjour
2×4=8sq/ft...8×30w=240...so yes with 2x200w take the b version of the hlg to be able to dim from10% to 100%
Or aim for the hlg-240-700 and run 5 on it!
Have a great day ★

Bonjour there's no difference between 36 and 72V
You need 700mA to run the 72V at 50w and 1400mA for 36V
350mA for 23w and 700mA for 36V...etc...under 350mA it is not easy to source efficient driver that is the "problem" with 72V...
Have a great day ★

littlejacob said:

Bonjour there's no difference between 36 and 72V
You need 700mA to run the 72V at 50w and 1400mA for 36V
350mA for 23w and 700mA for 36V...etc...under 350mA it is not easy to source efficient driver that is the "problem" with 72V...
Have a great day ★

Click to expand...

No 5, 72v on a HLG-185H-C500 super efficient with the DD bin lol. Supra and I had a discussion about my new panel which dissipates 55watts when turned down and 59watts from the wall.

Seriousbuds said:

Oh shit - that would make it prohibitively more expensive. Thanks for pointing this out.

Any idea why I shouldn't just do 36v instead of 72v, if the 72v are so hard to optimize?

Seems like I could pack more on a single driver especially if I went for the newer HLG-240H-C700..

But this is where it all gets confusing for me (36 vs 72)

Thanks for everyone's help in here, I couldn't find my ass from a hole in the ground without your help!

Click to expand...

36v vs 72v is really "six of one & a half dozen of the other" it all follows Ohm's law. 36v @ 1400ma = ~50w 72v @ 700ma = ~ 50w.

-I think one of the advantages to the 72v is that you can run 3w-5w monos in series @ 700ma (since most monos cant handle 1400ma) I think we will see some build like this once the HLG240c starts hitting the streets, since they have additionl voltage headroom.
-the other advantage , its easier to drive the 72v hard as hell with the drivers we can access. not sure if this is really an advantage unless on an extreme budget and efficiency doesnt matter.

Growmau5 said:

-I think one of the advantages to the 72v is that you can run 3w-5w monos in series @ 700ma (since most monos cant handle 1400ma) .

Click to expand...

ding ding ... winner winner chicken dinner.

I have been using 1050ma with my cob/mono mixes with monos that can safely run at 1000ma (cree photo reds, royal blues etc).
nice to be able to run them at 700 or even 1000ma with the 72V 3590s.