D dazedel8 New Member Jul 11, 2013 #1 Setting up my aeroponics system here, just wondering what you guys use to connect to the 1/8th NPT male thread tefen nozzles? I basicially have 1/4" john guest tee's and im wondering what to use on the opposite end of that.
Setting up my aeroponics system here, just wondering what you guys use to connect to the 1/8th NPT male thread tefen nozzles? I basicially have 1/4" john guest tee's and im wondering what to use on the opposite end of that.
L lostStone Member Jul 12, 2013 #2 You could try HDPE rod. Just cut to length, drill and tap; 1/4" on one end, 1/8" on the other. Ex. http://www.amazon.com/Density-Polyethylene-Opaque-Off-White-Diameter/dp/B0013HKYR8
You could try HDPE rod. Just cut to length, drill and tap; 1/4" on one end, 1/8" on the other. Ex. http://www.amazon.com/Density-Polyethylene-Opaque-Off-White-Diameter/dp/B0013HKYR8
J joat87 Member Jul 22, 2013 #3 use 1/8 x 1/4 tefen reducer coupling from link below. if you look up on tefen website you can find distributors in your country. http://www.tefenplastic.com/catalogue/product/727 hope this helps and good luck growing
use 1/8 x 1/4 tefen reducer coupling from link below. if you look up on tefen website you can find distributors in your country. http://www.tefenplastic.com/catalogue/product/727 hope this helps and good luck growing
J joat87 Member Jul 22, 2013 #4 also for the 1/4 inch side you could use john guest stem adapters to your 1/4 inch tee. http://www.johnguest.com/Home/applications/beverages-and-drinks-dispense/Polypropylene-Fittings/Polypropylene-Fittings---Imperial/STEM-ADAPTOR.aspx
also for the 1/4 inch side you could use john guest stem adapters to your 1/4 inch tee. http://www.johnguest.com/Home/applications/beverages-and-drinks-dispense/Polypropylene-Fittings/Polypropylene-Fittings---Imperial/STEM-ADAPTOR.aspx
D dazedel8 New Member Jul 22, 2013 #5 Thanks guys, i auctially ended up using brass bushings with 1/4" JG fip adapters.
