Yeswill the vero se's poke in connector work with regular stranded wire that's been tinned?
Sweet thanks
Ok so okay this MEANWELL HLG-185H-C1400B driver?That will work. I've got a 200w driver that runs 1.4A on my two Vero29 C. 69v, 3500k.
Pretty sure it will. I mean. It's the same amperage output as mine. And my lights work.Ok so okay this MEANWELL HLG-185H-C1400B driver?
Pretty sure it will. I mean. It's the same amperage output as mine. And my lights work.
As long as you're covering the minimum voltages to operate your cobs you should be fine.
Amazing ! What is the temp color and cri used?
I ordered 2 Vero29 Gen7 3000k, I would like to ask you but to connect them serves a specific connector?Pretty sure it will. I mean. It's the same amperage output as mine. And my lights work.
As long as you're covering the minimum voltages to operate your cobs you should be fine.
3000kAmazing ! What is the temp color and cri used?
I have 2x vero29 c SE leftover and I would like to run a similar setup. I thought about ordering 1x HLG-185H-C1400 (200.2W 1400mA71-143V)Pretty sure it will. I mean. It's the same amperage output as mine. And my lights work.
As long as you're covering the minimum voltages to operate your cobs you should be fine.
I have 2x vero29 c SE leftover and I would like to run a similar setup. I thought about ordering 1x HLG-185H-C1400 (200.2W 1400mA71-143V)Pretty sure it will. I mean. It's the same amperage output as mine. And my lights work.
As long as you're covering the minimum voltages to operate your cobs you should be fine.