Amber Glass BHO

Bublonichronic · Jan 16, 2012

couple pics of the finished product

Dan Kone · Jan 16, 2012

jdro said:
I have a foodsaver, I was told the foodsavers dont pull enough vacuum to be able to purge it?? Does it work for you? Can you notice a difference between your purged and un purged?

I've tried it. It purges a little. But nothing like a real vacuum purge.

Dan Kone · Jan 16, 2012

jdro said:
Thats what I had in mind. so about 330 total for vac and chamber?

yep. That sounds about right.

Dan Kone · Jan 16, 2012

jdro said:
I guess I should just give it a try since I got the foodsaver. Only problem is I cant find the attachment, can I buy them anywhere?

It's cheap, it's only like $10. Can only find it online.

jcdws602 · Jan 16, 2012

Have you guys tried these?? http://www.amazon.com/gp/offer-listing/B00005Q4OD/ref=dp_olp_used?ie=UTF8&condition=used

Unnk · Jan 16, 2012

those canisters jcd are plastic

your better off jsut getting the mason jar sealer attachment if oyu have it

it gets the job done but again like he said you have to run it acouple of times for it to stop bubling out

washedmothafuka · Jan 16, 2012

Bubblechronic...I wouldn't call that finished. You need to heat the jar to get the erll liquid. That looks like it's still got quite a bit of tane. You could probably scrape it off, and double boil on 130 into some nice shatter oil.

Buddy Hemphill · Jan 17, 2012

tip o the day..

stirring hotplate.

Oh yeah baby.

Wanna make the purge easy greasy? Drop a pellet in, set the temp, set the spin speed, and walk off....

On top of that...if you aren't agitating larger runs...chances are you aren't getting the purge you think you are. :roll:

And if you DO "swirl" it enough to get a good clean med...you probly stood there a few days.

There's a little further to go than heat and vac... :twisted:

Dan Kone · Jan 17, 2012

Buddy Hemphill said:
tip o the day..

stirring hotplate.

Oh yeah baby.

Wanna make the purge easy greasy? Drop a pellet in, set the temp, set the spin speed, and walk off....

On top of that...if you aren't agitating larger runs...chances are you aren't getting the purge you think you are.

And if you DO "swirl" it enough to get a good clean med...you probly stood there a few days.

There's a little further to go than heat and vac...

boooo!

but thanks for the tip.

Buddy Hemphill · Jan 17, 2012

Dan Kone said:
boooo!

but thanks for the tip.

Are you a no-taner?....lol...

It will make you a no-brainer...

yoMTVraps...here I come!!!

I hate to say it...but the truth is you can purge any solvent out of oil with the proper knowledge.'

But that is a HUGE disclaimer...because 99% of the people blasting tane dont have a clue other than internet banter.

http://youtu.be/waXUxhDCg3U

Dan Kone · Jan 17, 2012

Buddy Hemphill said:
Are you a no-taner?....lol...

It will make you a no-brainer...

yoMTVraps...here I come!!!

yeah. I was just hoping my new vac purge was an instant magic trick to get instant clean oil. Then you had to go crush my hopes and dreams with all that reality stuff. I needed to hear it, just didn't want to.

Bublonichronic · Jan 17, 2012

washedmothafuka said:
Bubblechronic...I wouldn't call that finished. You need to heat the jar to get the erll liquid. That looks like it's still got quite a bit of tane. You could probably scrape it off, and double boil on 130 into some nice shatter oil.

i did heat it, on "warm" setting on my skillit..but you are right, unfortunately i didnt purge it long enough

Bublonichronic · Jan 17, 2012

couldnt help myself, i like to edit vids, ahha [youtube]Gmd96kEX5XM[/youtube]

Bublonichronic · Jan 17, 2012

ok so after a second low heat vac purge i realize its not going to be so easy gettin the butane residue out, lol...so im gonna pick up one of these things http://www.amazon.com/Actron-CP7835...sr_1_sc_3?ie=UTF8&qid=1326836991&sr=8-3-spell and if that dont work, i guess it is nessicary for a expensive pump and chamber, but to be honest, im kinda starting to wonder if that will even get it all out...i dont think i have ever seen anyone "flame test" some supposedly clean stuff...only do "dabs" which wont expose the butane residue on camera... but i mean this stuff has to be cleaner than half the shit out there and is STILL full of butane, maybe matt rize had the right idea all along, ahha

Buddy Hemphill · Jan 17, 2012

you in Cali homie?

Here's the sure fire test...

take it to a lab and spend the $150-$200 it takes to know fur shure.

Why fuck around?....Think about it this way...how much money have you spent on retail sax of weed in your life?

How much money have you spent on JUST cans of tane?

Tane blasting gear?

Perhaps do your best...purge it as best you possibly can ...and get it sampled for petroleum distillates.

You will know if the best job you can do with the gear you have is up to snuff, or not.

Moreover you wont get cancer on your ballsack. : )

jcdws602 · Jan 17, 2012

Bublonichronic said:
couldnt help myself, i like to edit vids, ahha [youtube]Gmd96kEX5XM[/youtube]

This one is a little cheaper......it's the one I use****and did you purge when your oil was in a molten state,it didn't look like it in the vid,heat first then purge..............http://www.amazon.com/Mityvac-MV800...M9SS/ref=sr_1_2?ie=UTF8&qid=1326838077&sr=8-2

Bublonichronic · Jan 17, 2012

ahha, nah im in nevada bro, but as far as testing it, this is my "ghetto lab test" i assume the sparks are butane residue right? sorry cant embed this vid
http://www.youtube.com/watch?v=cC9ei2WnfiI

Bublonichronic · Jan 17, 2012

jcdws602 said:
This one is a little cheaper......it's the one I use****and did you purge when your oil was in a molten state,it didn't look like it in the vid,heat first then purge..............http://www.amazon.com/Mityvac-MV800...M9SS/ref=sr_1_2?ie=UTF8&qid=1326838077&sr=8-2

just got home with my mightyvac, it says it will only creat and hold a vacuum of 25, you get clean stuff with this? hope it pulls a better vac than foodsaver

jcdws602 · Jan 17, 2012

That's what I've been using.....I heat then purge @ 25 hg for 5-10 minutes.....I repeat the process 3-5 x's

Buddy Hemphill · Jan 17, 2012

jcdws602 said:
That's what I've been using.....I heat then purge @ 25 hg for 5-10 minutes.....I repeat the process 3-5 x's

Try stirring it vigorously between purges. Especially after the final purge...stir it GOOD and hit it with another purge and see if all the tiny bubbles stop

Amber Glass BHO

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Similar threads