mudballs
Well-Known Member
Yeah they're not a shinning example huh lolIt looks like it really helped
Are air pots any better than just a pot with a bunch of holes in the sides?
- Thread starter jfarrismu
- Start date
Star Dog
Well-Known Member
I've had mine circa 12 years and still like new, I don't believe you could wear one out/break it, they're made from sturdy af plastic (even the copies) and have no wear on them they just sit there.
There's originals and copies available which look the same at 1st glance but under closer scrutiny the number of blank rows varies and the holes size top to bottom varies which affects how much can wash out, some just have one hole size the quality ones start smaller and get bigger the lower they go, they're also heavier gauge plastic.
There's originals and copies available which look the same at 1st glance but under closer scrutiny the number of blank rows varies and the holes size top to bottom varies which affects how much can wash out, some just have one hole size the quality ones start smaller and get bigger the lower they go, they're also heavier gauge plastic.
jfarrismu
Well-Known Member
Does anyone have any recommendations for/against drilling holes in pots that already have large plants in them? I know I would be risking damaging roots, but I have a bad aeration and drainage issue. Should I or shouldn't I drill holes in my pot with an extant plant in it?
mudballs
Well-Known Member
go for it...use a forstner bit and really open it up...that's what i use, you wont hurt the plant unless you hit it in it's frontal lobe
Nutty sKunK
Well-Known Member
Can’t stress this enough about potting up.
It’s imperative that you pot your in layers. I use my finger tips just round the edges to fill up the cones.
If you mess up the potting water will fly everywhere and you’ll be pulling your hair out.
Ive seen someone use pantyhose around the pots to stop perlite etc coming out during the first few waterings.
Also when watering time comes do it in stages. A little to moisten the top. Go make the feed. 10 mins later the medium will accept water much better.
Brcomes too dry? Grab a bbq skewer and start stabbing all the way down to the bottom. This helps the water reach all the way down.
Last but not least I just got some mulch mats for the top. Should help it from going bone dry.
Green Refuge
Well-Known Member
I used them and didn't like them. The water comes out the sides and they dry too fast. If you get a gnats problem with those pots it's hard to control.
MickFoster
Well-Known Member
Rurumo
Well-Known Member
You just need to water a bit more slowly with these, pour some through each pot first, then wait a few minutes before you continue. Some yucca extract works wonders too. Anyone who has problems watering these pots is doing the EXACT same thing in regular pots, they just don't know it.
magnetik
Well-Known Member
I have em' but haven't used the big ones yet since I'm currently testing grassroots bags currently. I have used the smaller .3L ones for clones and seedlings though. Being able to peel the pot off, sprinkle mycos in the divots, and easily / quickly pot up makes it completely worth it. I feel there is less stress during transplant since you don't hear roots ripping off the sides when trying to peel it off like standard fabric pots.
quirk
Well-Known Member
We went over this a couple of years ago Mick. I flip them to get the larger bottom holes to the top for ease of training..
It's what works for me.
