Bashar Assad
Member
What I'll be growing is one cream of the crop amphetamine fem auto seed and one Critical AK fem auto seed.
This is my first time growing hydroponically, well actually this is my first time growing anything in anyway save a few runs of PF cake p. cubensis I've successfully cultivated. I'm wondering if this is a good idea for what to do for my grow.
My set up can be found here:
https://www.rollitup.org/t/grow-tent-set-up-noob-advice-welcome.876924/
I'm going to germinating the two seeds in pH adjusted (approx 5.8 ) 1.5" rock wool cubes soaked in pH adjusted nutrient/hormone solution. They will be kept at approx. 75-85*F in a humidifier located in my tent. The cubes will be misted with nutrient/hormone laden water (200-400ppm) every second day and kept under a 450nm blue/6.5k white/uv 60w LED (located approx. 6 feet vertically away from the humidifier). They will be kept in the humidifier for approx. 2 weeks or until roots pop out of the cube.
After germination they will be moved into hydrotron clay pellets in 5 gallon dip ring buckets in a 2x4x6 tent with a 12" intake desk top fan and 4" 200 ccm exhaust fan connected to a carbon filter + controller. For the vegetation stage they will be under a 18/6 light schedule from a 240w 450nm blue/12k white LED and 60w 450nm/6.5k white/uv LED which will be timed by a analogue timer. The air temp. will be kept around 24-26*c, by means of augmenting the speed of the exhaust fan. Humidity at 55%RH-60%RH. The buckets water will be kept at 66-68*F with a 25L capacity water chiller fed by a 70 gph pumpa. The plants will be watered every 6 hours for 15 minutes which will be controlled by an analogue timer. AN grow/bloom/micro used will be calculated according to AN's nutrient calculator but will be halved if not quartered, and aqua guard root gaurd/promoter will be used according to the box instructions. The PPM will be kept at 600 -800PPM and the pH will be at 5.6 - 6.2.
After about about 14-20 days vegetating they will enter the bloom stage, when they do I'll switch the gear/conditions to this…..
The LED's will be switched to a 300w 6-band/ir/uv LED and 150w 670nm red LED. They will be under an 18/6 light schedule timed by an analogue timer. The temperature will be kept at 24-26*c by means of adjusting the fan exhaust speed and the humidity will be at 55 %RH - 65% RH. The water temp. in the buckets will be kept at 66 -69*F by the water chiller. The plants will now be watered every 4 hours, which will be kept scheduled on a analogue timer. AN Bloom/Grow/Micro will be used in accordance to AN's nutrient calc but the values will be halved. Aqua guard will be added still. The PPM will be kept at 1000PPM and the pH will be kept at 5.6-6.2.
Do I have the right idea for how to run my first grow? Letting me know of anything I'm missing or haven't thought of is much appreciated
Thanks!
This is my first time growing hydroponically, well actually this is my first time growing anything in anyway save a few runs of PF cake p. cubensis I've successfully cultivated. I'm wondering if this is a good idea for what to do for my grow.
My set up can be found here:
https://www.rollitup.org/t/grow-tent-set-up-noob-advice-welcome.876924/
I'm going to germinating the two seeds in pH adjusted (approx 5.8 ) 1.5" rock wool cubes soaked in pH adjusted nutrient/hormone solution. They will be kept at approx. 75-85*F in a humidifier located in my tent. The cubes will be misted with nutrient/hormone laden water (200-400ppm) every second day and kept under a 450nm blue/6.5k white/uv 60w LED (located approx. 6 feet vertically away from the humidifier). They will be kept in the humidifier for approx. 2 weeks or until roots pop out of the cube.
After germination they will be moved into hydrotron clay pellets in 5 gallon dip ring buckets in a 2x4x6 tent with a 12" intake desk top fan and 4" 200 ccm exhaust fan connected to a carbon filter + controller. For the vegetation stage they will be under a 18/6 light schedule from a 240w 450nm blue/12k white LED and 60w 450nm/6.5k white/uv LED which will be timed by a analogue timer. The air temp. will be kept around 24-26*c, by means of augmenting the speed of the exhaust fan. Humidity at 55%RH-60%RH. The buckets water will be kept at 66-68*F with a 25L capacity water chiller fed by a 70 gph pumpa. The plants will be watered every 6 hours for 15 minutes which will be controlled by an analogue timer. AN grow/bloom/micro used will be calculated according to AN's nutrient calculator but will be halved if not quartered, and aqua guard root gaurd/promoter will be used according to the box instructions. The PPM will be kept at 600 -800PPM and the pH will be at 5.6 - 6.2.
After about about 14-20 days vegetating they will enter the bloom stage, when they do I'll switch the gear/conditions to this…..
The LED's will be switched to a 300w 6-band/ir/uv LED and 150w 670nm red LED. They will be under an 18/6 light schedule timed by an analogue timer. The temperature will be kept at 24-26*c by means of adjusting the fan exhaust speed and the humidity will be at 55 %RH - 65% RH. The water temp. in the buckets will be kept at 66 -69*F by the water chiller. The plants will now be watered every 4 hours, which will be kept scheduled on a analogue timer. AN Bloom/Grow/Micro will be used in accordance to AN's nutrient calc but the values will be halved. Aqua guard will be added still. The PPM will be kept at 1000PPM and the pH will be kept at 5.6-6.2.
Do I have the right idea for how to run my first grow? Letting me know of anything I'm missing or haven't thought of is much appreciated
Thanks!