tokenchokenpassnsmoke
Active Member
whats up guys, ive checked out this forum and im pleased with what ive read so far so i set up an account to discuss consumption of the good herb with my fellow pothead brethren...
well ive been smokin it up for bout 5 years now and this year is the year i decided to try my hand at growin bud
ive got a plan for a grow cabinet thats planned on being mounted in a closet, somethin low key just to start with, for starting plants in the colder months and moving outside when it gets warm/ tryin to grow short bushy plants, my plans are as follows for my cabinet... critiques, suggestions, and comments are welcome
cabinet dimensions are 3 feet tall, 2 feet wide, and 1 1/2 feet deep
planning to caulk all the cracks inside and out, and a door with 2 locks... inside of the cabinet painted in a white enamel with 1inch wide strips of mylar criss crossed on the inside walls about 2 inches apart
power supply is a power strip plugged into a GFCI in an electric box mounted on the cabinet, with a cord plugged into an outlet powering the GFCI
ventilation plans consist of a ball bearing computer fans powered by use of a ac/dc adapters, 1 at the bottom for intake, 3 in a row about 2 inches apart at the top to push the air through a charcoal filter, and 2 on the inside blowing in a clockwise direction in efforts to circulate air efficiently
lastly, as far as lighting is concerned, 2 100 watt spiral flourescent lightbulb on a bar that can be raised/lowered by means of simple brackets cut out of wood on opposite walls inside the cabinet...
just some meager plans for a bud growing project, lemme hear what ya think, thanks guys
well ive been smokin it up for bout 5 years now and this year is the year i decided to try my hand at growin bud
ive got a plan for a grow cabinet thats planned on being mounted in a closet, somethin low key just to start with, for starting plants in the colder months and moving outside when it gets warm/ tryin to grow short bushy plants, my plans are as follows for my cabinet... critiques, suggestions, and comments are welcome
cabinet dimensions are 3 feet tall, 2 feet wide, and 1 1/2 feet deep
planning to caulk all the cracks inside and out, and a door with 2 locks... inside of the cabinet painted in a white enamel with 1inch wide strips of mylar criss crossed on the inside walls about 2 inches apart
power supply is a power strip plugged into a GFCI in an electric box mounted on the cabinet, with a cord plugged into an outlet powering the GFCI
ventilation plans consist of a ball bearing computer fans powered by use of a ac/dc adapters, 1 at the bottom for intake, 3 in a row about 2 inches apart at the top to push the air through a charcoal filter, and 2 on the inside blowing in a clockwise direction in efforts to circulate air efficiently
lastly, as far as lighting is concerned, 2 100 watt spiral flourescent lightbulb on a bar that can be raised/lowered by means of simple brackets cut out of wood on opposite walls inside the cabinet...
just some meager plans for a bud growing project, lemme hear what ya think, thanks guys