greenghost420
Well-Known Member
damn, no ship to mass lol i may have to go with 99% iso.
BHO with Vacuum oil/wax tutorial
- Thread starter Guzias1
- Start date
Guzias1
Well-Known Member
wowwwwww, i feel sooo lucky now :] , and happy i bout 2 1.75L bottles..
pre planning, but here is my plan!
Spray into 8x8 pyrex,
let butane boil off to where i have a runny oil,
add 10x as much ehtanol (everclear) as the runny oil,
place into freezer for 24 hours, take out, then mix/whip the liquid,
place back into freezer for 24 more hours..
take out, strain through 2 coffee filters onto veryyyy flat surface.
boil off ethanol at room temp? perhaps boil off at 115F?
smoke my absolute?
:]
thats my knowledge on the process. pleaseee, all you guys doing it, that sound about right?
andddddddddddddddddddddddddddd, im gonna have to fucken scrape?!?!?!? lovelyyy..
i hate scraping, new idea
spray into my 8x8 pyrex
boil off tane till its runny, then add ethanol directly to pryrex,
place into freezer for 24 hrs, mix, replace
after 48 hours total in freezer, take out, strain the liquid through 2 coffee filters, and into a new 8x8 pyrex..
boil off ehtanol at room temp, (or 115F) then once i get down to a pretty thin liquid, throw into vacuum, continue at 115F..
??!?!? damn, its a wholeeeee new process folks
pre planning, but here is my plan!
Spray into 8x8 pyrex,
let butane boil off to where i have a runny oil,
add 10x as much ehtanol (everclear) as the runny oil,
place into freezer for 24 hours, take out, then mix/whip the liquid,
place back into freezer for 24 more hours..
take out, strain through 2 coffee filters onto veryyyy flat surface.
boil off ethanol at room temp? perhaps boil off at 115F?
smoke my absolute?
:]
thats my knowledge on the process. pleaseee, all you guys doing it, that sound about right?
andddddddddddddddddddddddddddd, im gonna have to fucken scrape?!?!?!? lovelyyy..
i hate scraping, new idea
spray into my 8x8 pyrex
boil off tane till its runny, then add ethanol directly to pryrex,
place into freezer for 24 hrs, mix, replace
after 48 hours total in freezer, take out, strain the liquid through 2 coffee filters, and into a new 8x8 pyrex..
boil off ehtanol at room temp, (or 115F) then once i get down to a pretty thin liquid, throw into vacuum, continue at 115F..
??!?!? damn, its a wholeeeee new process folks
greenghost420
Well-Known Member
can u evap on one of those slickpads
greenghost420
Well-Known Member
specially with the temp swings from freezing to 115
650baquet
Active Member
More like SMOKE MY ABSOLUTE!!!!
haha...it is indeed absolute at this point?
If you want the shatter to be like glass with no bubbles you'll have to vac...well that's the only way i can see how. But ya i hate scraping, but if it's not so bad if you don't have to scrape the walls of the pan or any corners. I had only minor frustration while scraping mine up lol whereas i've wanted to punch holes in my walls before from having a chunk of shatter go flying off the razor, hit my in the face and then i can't find it...i just have to get used to it.
Took a while for my BHO to dissolve in even warm Everclear so having a more runny form with less purged butane would probably help dissolve it faster.
Sounds like i should feel lucky to have cheap Everclear just down the street. I just took two medium size dabs and one bong rip. The dabs were indeed very very smooth...like flavored air. And because you're not stressing your heart from caughing and building up your blood pressure or having a caughing fit...you're able to experience the high WAY better from begining to end. i'm about to prep that bud i said i was going to make into some shatter. Looking for a larger surface to evap the Everclear on. My girlfriend has a profile mirror about 1ftx4ft. Might work pretty well but...gonna have to do it when she's not home hehe...OR since i just got paid i'll go shopping around some thrift stores and other places.
Props on the 5month progression there. That last pic looks yummy, i've been wanting to take pictures of atleast one plant from beginning to end but i usually end up missing enough pictures to make it worth compiling. Maybe i'll do it with the main cola of my chocolope since i've been taking some nice pictures of it
gonna be fat
650baquet
Active Member
Ya you would think that such a powerful solvent would be able to break down silicon...idk either. Might be fine for a month-6months use then maybe aver flexing it and bending it with the exposure to high temp flux and either 99%iso or Everclear will start to do some sort of damage to it...I know the ones we use at work are fairly old now and only get used for cookies but they look like SHIT lol. The silicon non stick still functions fine but it's really pitted out in places and def brakes down over time and abuse. I'm not going to know til i get one but i still want to no matter what.
greenghost420
Well-Known Member
i guess ill be the one testing it. i just ordered one and one of those slickballs. now i need to find some everclear. i hope the silicon doesnt break down and flake into my oil that would suck!did the bubble bag filter the waxes out real good?
650baquet
Active Member
I feel the single 28micron screen worked great! you could use a few screens if you wanted but after it appeared all of the Everclear had drain through the screen i too my dropper and added about .5ml to help ensure the oil was washed through. I remember performing similar teks in chem labs but it was mainly to ensure all the waist product was dissolved through leaving the valuables on the filter. From what i read about people using silicone baking pads similar to the oil-slick pad, it just seems like silicone allows oils and alcohol to absorb in...seems iffy but i hope it works for you...i'd say about a 60% chance that it doesn't work due to all stuff i read about silicone absorbing alcohol.
Guzias1
Well-Known Member
dunno if skunkpharm trademarked "absolute" but sure does sound like thats what yous gots!
mannnnnn, i used to take so many pictures of my ladies, its fun to see each cycle get better and better :] and the pics with dates on them, really help me remember when and what the hell i did what with them..
it gets a little too common though, i take pictures a few times a week :] my ladies like the camera
greenghost420
Well-Known Member
does it break down after is absorbs the alcohol? 420 i wanted to be in colorado,now im just gonna be chilling hopefully dabbin
Guzias1
Well-Known Member
my town sparks up all day :]
im hitting up a club dt, to seeeeee Hieroglyphics at night, pretty much baking alll dayyyyyyyyy, im gonna make some trippyyyy edibles :]
method2mymadness
Well-Known Member
It says it wnt hurt the pad but they are probly talking about 91-99% find out and try it do a small.amount there only 20 bucks if it hurts it buy a new one. I recommend just using them as a replacment for parchment paper when purging etc
vacpurge
New Member
if you guys cant scrape a dish without making a mess youre fkn retarded haha. try heating the dish for 5 seconds... will make your life WAY easier.
get the everclear off ebay. might be paying a little more... but thats the one thing you gotta take the shitty end of the stick on. damn everclear. id say I feel bad for ya, but I dont because everything else you get is 50% cheaper than what I gotta pay!! haha
get a stainless steel dish from walmart, and use some elbow grease and quit being so lazy, its easy! dish costs 4$, blades cost 4$, forceps cost 4$. heat the dish up if youre having a hard time scraping it (duh) but not too much. you should be able to recover 99.9%, if not 100%.
the only thing 100% about parchment paper is that its fucked me and I wasnt able to fully recover every single spec 100% of the time.
scraper for life right here. those glass pyrex dishes are retarded. bottom isnt flat and corners suck.
get a large STAINLESS STEEL dish, or a flat piece of glass and be done with it. hell if youre real smart and crafty, id try taking a tiger torch to the glass, getting it VERY hot. then slightlyyyy press the center a tiny tiny bit and hold it for a few seconds.. maybe get it to depress just the tiniest amount to make a mini bowl/concave shape to the glass. not one you can see with your eye, but just enough to make the oil flow towards the middle and not the edges. heating/melting/manipulating glass isnt as hard as one would think. I always heat up stuff on my bong/oil attachment to bend/adjust it. (not quartz) (use propane torch)
you can see the scrapes in the dish. ive been using it for years. recover 100% every time, no metal scrapings, no problems. simple. no mess, every time. heat is your friend, but not too much.
get the everclear off ebay. might be paying a little more... but thats the one thing you gotta take the shitty end of the stick on. damn everclear. id say I feel bad for ya, but I dont because everything else you get is 50% cheaper than what I gotta pay!! haha
get a stainless steel dish from walmart, and use some elbow grease and quit being so lazy, its easy! dish costs 4$, blades cost 4$, forceps cost 4$. heat the dish up if youre having a hard time scraping it (duh) but not too much. you should be able to recover 99.9%, if not 100%.
the only thing 100% about parchment paper is that its fucked me and I wasnt able to fully recover every single spec 100% of the time.
scraper for life right here. those glass pyrex dishes are retarded. bottom isnt flat and corners suck.
get a large STAINLESS STEEL dish, or a flat piece of glass and be done with it. hell if youre real smart and crafty, id try taking a tiger torch to the glass, getting it VERY hot. then slightlyyyy press the center a tiny tiny bit and hold it for a few seconds.. maybe get it to depress just the tiniest amount to make a mini bowl/concave shape to the glass. not one you can see with your eye, but just enough to make the oil flow towards the middle and not the edges. heating/melting/manipulating glass isnt as hard as one would think. I always heat up stuff on my bong/oil attachment to bend/adjust it. (not quartz) (use propane torch)
you can see the scrapes in the dish. ive been using it for years. recover 100% every time, no metal scrapings, no problems. simple. no mess, every time. heat is your friend, but not too much.
greenghost420
Well-Known Member
yea i dont mind scraping,just getting lazy seeing noone else scrape lol ill most likely stick to my pyrex.
650baquet
Active Member
The dish is already hot due to i'm evaping the Everclear at 115F. It's not "hard" or strenuous to scrape....just harder and more annoying that what i'm used to with just BHO on parchment. Though, when i find a large piece of glass it'll be easier. I've considered your tiger torch idea, like only a 5mm or so of depression. I might have my glass blowing buddies help me do that with their torch.
vacpurge
New Member
hahaahahah. you guys are crazy. you wanna see bad memories?
every picture I got with parchment in it, and its a mess that I wont be able to recover 100% back from.. put your stuff on metal or glass and you can scrape it at any time and literally recover 100%. wipe the last tiny bit onto a paper and roll a nice joint with it. friends dont let friends use parchment paper!!!
every picture I got with parchment in it, and its a mess that I wont be able to recover 100% back from.. put your stuff on metal or glass and you can scrape it at any time and literally recover 100%. wipe the last tiny bit onto a paper and roll a nice joint with it. friends dont let friends use parchment paper!!!
