c02 injection (for small grows)

Product Description
This kit gives you everything you need to set up a highly accurate CO2 enrichment system for use with bottled CO2 or a gas burning CO2 generator. The kit consists of the Evolution CO2 Controller, the Evolution CO2 Analyser and the EcoTechnics CO2 Regulator giving you the ultimate CO2 enrichment system.

It is extremely easy to set up and operate and allows for set up number 1 shown below. Set up 2 can be achieved by adding the Evolution Temperature & Humidity Controller if required.

1 For this set up you will need to plug your CO2 release system, extraction system and the CO2 Analyser into the controller. Set your required CO2 level and how often you wish your extraction system to operate and for what duration. The system will then switch off your extraction before primary dosing and the CO2 Analyser will sense the dissipation of CO2 from the room and secondary 'top up’ dosing will occur as instructed by the CO2 Analyser. This allows allow for highly accurate ‘top up’ doses.

2 This set up uses the CO2 Analyser AND an Evolution Temperature & Humidity Controller. Set up like this the system works as above except the Temperature and Humidity controller will override the extraction system should temperature or humidity rise above your set parameters before the extraction is due to switch on. Should this happen the CO2 Analyser will know how much CO2 has been lost due to the temp/humidity correction and will replace that exact amount.

Click to expand...

CO2 injection systems. When you have complete control over your grow room the addition of a co2 injection system will grow your crops faster and increase yields up to 30%

Click to expand...