fragileassassin
Well-Known Member
i think I saw 1 on 15 off.
i do 15/15 if I leave it on any longer water heats up too much.
Diggs99 : Everything GROWS anything GOES!
- Thread starter diggs99
- Start date
i do 15/15 if I leave it on any longer water heats up too much.
diggs99
Well-Known Member
Yes, i ran mine 1min on/ 15min off @Cannademik
Thundercat
Well-Known Member
Looks like things are coming together well 
.
.
diggs99
Well-Known Member
Hey bud, how you doing? all settled in after the move?Looks like things are coming together well
Hope all is well
diggs99
Well-Known Member
Day 4 veg for the BOO clones
ph had risen to 6.5 after 4 days so this morning I have them another gallon of mute mix ph’d real low to bring the overall number back down to 5.8
I think they look pretty good. Still a little bit of twist going on in a few spots but nothing too serious.
edit: rotated pic properly
ph had risen to 6.5 after 4 days so this morning I have them another gallon of mute mix ph’d real low to bring the overall number back down to 5.8
I think they look pretty good. Still a little bit of twist going on in a few spots but nothing too serious.
edit: rotated pic properly
Attachments
Last edited:
Thundercat
Well-Known Member
Heck yeah man things are going well. Life is finally settling down some after the move and the holidays and all of our birthdays the last couple months. Work has been great, and I might have my wife talked into letting me put up a little 2x2 while we are still in this apartment. Even though we are in Oregon now, our apartment complex is 100% no cannabis. They don’t seem like they are going to be all up in our shit though so a little personal tent in a closet might be doable.
WillieP
Well-Known Member
diggs
I just wanted to stop by and check out your grow.
Really cool you're gonna give the aero a shot, I'll be following along with that.
Looks like everything is going really well so far.
As I think you know, I started some hemp seeds as a practice run before I started any real seeds.
Just a 5 gal bucket, pump with sprayer head and a timer. 2 inch net pots with rapid rooters in them to start from seed.
I've been amazed at how well the thing has worked. I'm at 1 min ON and 5 min OFF.
These hemp plants have been really cool to play with, although I have no use for them.
Here's hoping all continues to go well!
Cheers,
WillieP
I just wanted to stop by and check out your grow.
Really cool you're gonna give the aero a shot, I'll be following along with that.
Looks like everything is going really well so far.
As I think you know, I started some hemp seeds as a practice run before I started any real seeds.
Just a 5 gal bucket, pump with sprayer head and a timer. 2 inch net pots with rapid rooters in them to start from seed.
I've been amazed at how well the thing has worked. I'm at 1 min ON and 5 min OFF.
These hemp plants have been really cool to play with, although I have no use for them.
Here's hoping all continues to go well!
Cheers,
WillieP
diggs99
Well-Known Member
Awesome bud, glad to hear it.
Thanks bro. hope your doing well.
Thanks willie, those hemp plants are looking great. Like you, ive also really enjoyed the aero so far. Best of luck bud, thanks for popping by.
diggs99
Well-Known Member
The big gals after another round of supercropping.
Day 5 veg for the Bag of oranges clones
All is well, twist hasn’t gotten any worse, roots look decent. Big system is ready and leak proofed, only issue is the pump I bought isn’t powerful enough. Order 2 bigger pumps last night.
the plan is to flip them all at same time, easier
To keep room dialed in this way.
Day 5 veg for the Bag of oranges clones
All is well, twist hasn’t gotten any worse, roots look decent. Big system is ready and leak proofed, only issue is the pump I bought isn’t powerful enough. Order 2 bigger pumps last night.
the plan is to flip them all at same time, easier
To keep room dialed in this way.
Attachments
Cannademik
Active Member
What light do you use for your cloner? Mine is currently running right now and I decided to put my HLG100 on it but very far away. Im thinking about just buying some cheap CFLs. Also do you do 18/6 or 24? I was thinking of using this HLG for two moms for more clones. Thanks!
diggs99
Well-Known Member
Im using a t5 fixture above the cloner and so far the veg box too. Ill be moving them into the room and under my Led fixtures soon, they will finish vegging and flower in there.
This run i have done 24/7....mainly because when the lights were off the room got too cold and i didnt have a heater to put in the tent. Spring and summer months i run 18/6
Cannademik
Active Member
For sure, I have a heater in there right now set at 75.. Do you think I really need to put solution? Can I just run tap water?
JohnDee
Well-Known Member
Hey Diggs,
Everybody else was popping in...so I thought I should too. I'm still at it...gone edibles. Rarely smoke.
I have to shut down for awhile...surgery. Gonna get a new hip. Don't laugh you young tykes...time will catch up with you.
So I'm doing a combination seed run and pheno hunt. With all the females pollinated...once I find the pheno,,,the seeds are right there in it. One oddity...I am the proud owner of a male Strawberry Dog Shit. Never smoked it. I just don't know if I want to inflict that pollen on any of my females.
Nice clone op you have going...and you're right. mono-cropping gives great uniformity. I remember fondly doing WW sog on a 3x3 tray. Once rooted...onto the tray at 12/12. Never got over 1 1/2 feet and all 25 the same. Time after time. Did it for 3 years.
Stoned as usual...
JD
Everybody else was popping in...so I thought I should too. I'm still at it...gone edibles. Rarely smoke.
I have to shut down for awhile...surgery. Gonna get a new hip. Don't laugh you young tykes...time will catch up with you.
So I'm doing a combination seed run and pheno hunt. With all the females pollinated...once I find the pheno,,,the seeds are right there in it. One oddity...I am the proud owner of a male Strawberry Dog Shit. Never smoked it. I just don't know if I want to inflict that pollen on any of my females.
Nice clone op you have going...and you're right. mono-cropping gives great uniformity. I remember fondly doing WW sog on a 3x3 tray. Once rooted...onto the tray at 12/12. Never got over 1 1/2 feet and all 25 the same. Time after time. Did it for 3 years.
Stoned as usual...
JD
diggs99
Well-Known Member
yes you can just run tap water, my good bro @CoB_nUt runs his cloner with just tap if I recall correctly.
hey JD, very glad to see you pop by bud.
sorry to hear about surgery but glad you have a new hip, those things can be useful
A male SDS? Ohhhh the possibilities lol
ya bud, I enjoy this form of training and keeping the canopy flat. It’s a bit rough at times but the plants always respond well.
Hope your doing well and the road to recovery is fast.
CoB_nUt
Well-Known Member
Hey Gromigo,how goes it diggs? Yessir tap water only unless they need to be fed from being in the cloner too long.
Tap water only...these either need to be fed or removed.I'll clip the roots back some so they can bush out.
I have just a 14w screw in led spotlight on them.I popped the cover off and put it in one of those sockets with the light shroud around it from home depot.
Cannademik
Active Member
I woke up to my clones in my aerocloner died.. What mister do you use? I used these... https://www.amazon.com/gp/product/B01MZ0C9MS/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 and they dont seem to be making a mist.
CoB_nUt
Well-Known Member
Looks like the same ones I have.Are yours clogged? They clog pretty easily.Get a paint strainer bag to cover your pump. I've found the bits of pvc from drilling the holes for them will clog them right out the gate also.
Are you sure they are dead,or are they just slumped over from no mist? Stick them in a cup of tap water to see if they perk up while you find out the issue with your misters
I've had a cloner full of slumped over cuts from forgetting to turn the pump back on. 30 mins to an hour later later they perk back up.
Axion42
Well-Known Member
What size pump you using? Maybe it's not strong enough to hit the stem?