distilled water in my bubble cloner??

pointer80

Member
Hello all, I just built a bubble cloner and I put distilled water in it and was told by a friend that distilled water might not be the best to use, is that true or does it matter? If not can I just go ahead and change out the water? It has been going for about 12 hours. Thanks all.
 

snoeman032

Well-Known Member
Maybe the inventor of EZclone may be able to tell you. Like I said everyone is gonna have different options on things this being one of them
 

Bugeye

Well-Known Member
Both distilled and RO are soft water with close to 0 ppm of dissolved solids. Distilled will have extremely low levels of oxygen so it needs to be agitated to get O2 levels up. I would assume your system bubbler is adequate for this but it never hurts to agitate before adding it into a system.
 

vostok

Well-Known Member
Hello all, I just built a bubble cloner and I put distilled water in it and was told by a friend that distilled water might not be the best to use, is that true or does it matter? If not can I just go ahead and change out the water? It has been going for about 12 hours. Thanks all.
Distilled water is the best for any intercourse with plants

as its the cleanest.. true it ain't got no minerals but hey we got cal mag

avoid using that during cloning ....lol

you could use anything that can carry 02 to the cambium ...lol

cloning is all but teasing out the root-lets(warts) from under the bark

no biggy chill!

change the water everyday ..fed it to your other plants

avoid that crappy instruction manual from the ezi cloner

better info online

like using household honey better than clonex...it sticks ,..lol

use lots of air or spray you got issues it often the lack of air

or shitty water

good luck

ps ask ur buddy why not? .. lol
 
Top