DIY Flood and Drain for small 6 Plant grows

fabodnickMD

Member
....so I have been working on a few things for my next go round, and I have a new toy that I think some of you might get a kick out of.......I put together a flood and drain setup out of things I had laying around, check it out and tell me what you think.........

...First I took two storage bins that I had used to move and modified them slightly, cutting a two inch flange all the way around on one..........

..........01_opt.jpg.....the pump eco+265, which means res° is going to be an issue...........but not a problem.....

and drilling two 1" holes center mass...I used 3/4" pvc and the slip to slip connectors, both top and bottom....(the ones in the corners are for support)

...02_opt.jpg

I cut the bottom off of a milk crate and clipped two of the "tines" out to let the drain extension through..........

........03_opt.jpg.....

and covered the bottom with dollar tree shelf liner to keep the Hydroton from falling through........................

...05_opt.jpg........................ 04_opt.jpg....

the basket placement is perfect for 6-5" baskets, and the two in the center keep the whole thing issue free (for the most part)
..............................06_opt.jpg


....I will continue this thread as the precursor to phaze 2 of my current endeavor....I have this>>>> https://www.rollitup.org/grow-journals/378441-trailer-park-bagseed-cfl-grow.html <<<<<<<<<<<going on right now, but in a week or so I am going 400w HPS, in the same space.
I will be posting a thread on this as it develops, so if your so inclined, stay tuned......


HTML:
DIY Flood and Drain for small 6 Plant grows
 

fabodnickMD

Member
........ok so I have this up and running.....................in_use.jpg................I am going to post another thread on this, so look for the link when I get it started.....
 
Top