DIY kits now available from Timber!

It's cheaper than the cutter kits, it's already assembled, and it has better quality components. I pay for name brand, but with the Timber kits, you actually pay less for better name brands than other place's kits, and they do all the assembly for you.

I'm not a shill for the company, but I don't understand why this isn't getting a LOT more attention around these parts.

Here's my 3x2x3 for the veg tent, which I completed today amidst neighborhood power outages and other shenanigans:

09-VegSystem-1920.jpg
 
Diy is easy with those pin sinks. I think the main thing is knowing what you got under the hood kinda thing vs hype or bs. Plain and simple that's how it should be.
 
Stage420 said:
High again Dan
I believe I will invest in the 4 pk reflector kit with diffuser. Order coming inbound.
Thx again.
Click to expand...
High Again,

No worries - happy to help you out. Also, your kit is shipping today for delivery on Thursday. Enjoy!

Best Regards,
Dan
 
Hey @RainDan ,question. I see you have 4 hex screws around the cob holders that the wires are wrapped around. Is that their purpose? Or is there something else?
 
Airwalker16 said:
Hey @RainDan ,question. I see you have 4 hex screws around the cob holders that the wires are wrapped around. Is that their purpose? Or is there something else?
Click to expand...

Hi @Airwalker16,

The four screws are for mounting to your frame. We just wrap the wires around them for shipping purposes. You can utilize 2 or 4 - we drill and tap for four to try and accommodate as many different frame options as possible.

Of note - we have pushed the holes out closer to the edge of each heatsink for mounting - this will also be reflected in updated pictures that should hit the site shortly.

To those who have ordered within the last few days, you will see this change reflected in your kit - should make mounting much easier.

If you have any other questions, I am happy to answer them.

Have a great day.

Best Regards,
Dan
 
RainDan said:
Hi @Airwalker16,

The four screws are for mounting to your frame. We just wrap the wires around them for shipping purposes. You can utilize 2 or 4 - we drill and tap for four to try and accommodate as many different frame options as possible.

Of note - we have pushed the holes out closer to the edge of each heatsink for mounting - this will also be reflected in updated pictures that should hit the site shortly.

To those who have ordered within the last few days, you will see this change reflected in your kit - should make mounting much easier.

If you have any other questions, I am happy to answer them.

Have a great day.

Best Regards,
Dan
Click to expand...
I was going to say, the holes are way to close to the holder to be of any real use for mounting. Being further out will help immensely.
 
Airwalker16 said:
I was going to say, the holes are way to close to the holder to be of any real use for mounting. Being further out will help immensely.
Click to expand...

They're not too close to be of use. I did just fine in mounting my 20 cobs on 1/8" thick AL angle. They work as is, but I did provide Dan that feedback that they were too close, so I'm glad they've been moved out a little bit. That's good customer service.

You do have to be precise, but I literally made initial measurements on a heavy piece of paper and used that to measure from the radiused interior of the bracket, i.e. not very precise at all. Still came up within a mm on most, and it was fine.
 
So...
A newbie question. (my apologies)

Defusers over reflectors?
The defuser removes hot spots?
Are hot spots an issue with Cree CXB 3950 cobs?
 
jeepster1993 said:
So...
A newbie question. (my apologies)

Defusers over reflectors?
The defuser removes hot spots?
Are hot spots an issue with Cree CXB 3950 cobs?
Click to expand...

You can't use diffusers without the reflectors, because I think they pop into the reflector. Diffusers remove hotspots to some degree, and I guess supposedly mimic the diffusion of light in nature from clouds, leaves, shadows, etc. Mostly, for me, they will protect the surface of the cobs without losing too many photons.

Hotspots aren't really an issue without reflectors/lenses. They can be an issue, in some cases, with reflectors/lenses if too close to the tops of the plants, or the cobs are spaced too close. Keep your cobs spaced apart properly, and no closer than 18" (possibly 24" @ 1400ma or higher) from the tops of your plants, and you should be fine in most cases. I'm no expert; I just read a lot.
 
There is plenty of head room in the tent. A Gorilla grow 2x2.5 with the extra high roof, 7 feet.

I have 2 tents: 1 Gorilla Grow and 1 Secret Jardin 3x3x6. I MUCH prefer the Jardin. It opens with 1 zipper, the GG takes 5 zippers to open it up and close it, a BIG difference.


Got the reflectors, but not the defusers. The thinking was..."I don't want defuse light, I want intense light".
 
My order arrived.
I am excited. The stuff looks great. Very quality.
IMG_1013_zpsanfqluqa.jpg


Now comes the "build". Gonna go buy some angle today and get started.

Thanks Dan.
 
You must log in or register to reply here.

Similar threads

Tha Bad Hippie
Tha Bad Hippies’ 5x5 680w LED Studio Apartment Closet Grow
Replies
3
Views
392
bignugs68
bignugs68
O
Lighting Decisions are haaaard.
Replies
17
Views
2K
Jonesfamily7715
J
S
Superboof & Chimera #2-just flipped 12/12
Replies
6
Views
215
FmSwayze
FmSwayze
yocan
How Much is the Yocan Pillar?
Replies
2
Views
394
yocan
yocan
frankoo
Seeking Vinyl Inspiration for My Ride
2
Replies
28
Views
2K
raratt
raratt
Back
Top