DIY LED grow light help wanted

I bought it pre-soldered from an eBay seller. I specified the wavelengths and CCT's I wanted, what quantity, and where on the board they would go. She soldered everything for me, suggested a driver, and shipped everything out in a timely fashion. All I had to do was solder the driver to the mcpcb and attach it to a "heat sink" (1/4 size baking sheet pan piggy-backed with some cheap extruded Aluminum heat sinks bought off eBay).

I don't believe soldering LED's to the mcpcb requires reflow. A dab of thermal grease on the underside of the LED, place LED, solder contacts, done. If we're talking about Cree, or some of the Osram's, however, then yeah, you'll need to reflow.
 
A dab of thermal grease on the underside of the LED, place LED
Click to expand...
im not totally certain but i think thats a bad idea, thats like the hottest spot and all that "thermal stuff" is in no real comparison to real soldering/reflow i think. Atleast "thermal" Used on the back of those pcb stars heat is spread through a much wider Connection, so there its not such a big Problem imo.
 
Those LED's might very well be (actually probably are) soldered to those stars with thermal grease on the package, though.
 
Yes, that is the eBay seller I'm talking about. Link to her store:
http://www.ebay.com/sch/merryday168/m.html?_nkw=&_armrs=1&_ipg=&_from=
She has certain things that aren't listed (drivers at certain specs, LED's of certain wavelengths, etc.) so if you plan to buy from her and there's something you don't see be sure to ask. Doesn't hurt to ask. She seems like a very upstanding eBay seller and she actually soldered everything for me, no questions asked, free of charge. Yes, her LED's are not THE BEST quality, but I can't recommend her enough if you're just looking for cheap, low wattage, DIY solutions.

If you're planning on building Red/Blue panels I think you might be better off with a cheap Chinese UFO. If you want White mixed with Red, or Pink, or anything else under the sun, then I think she's your gal. I plan to buy some 24x1W mcpcb's from her if another company is able to make a 1W Warm White package to the specs I'm looking for.
 
Bumping Spheda said:
Yes, that is the eBay seller I'm talking about. Link to her store:
http://www.ebay.com/sch/merryday168/m.html?_nkw=&_armrs=1&_ipg=&_from=
She has certain things that aren't listed (drivers at certain specs, LED's of certain wavelengths, etc.) so if you plan to buy from her and there's something you don't see be sure to ask. Doesn't hurt to ask. She seems like a very upstanding eBay seller and she actually soldered everything for me, no questions asked, free of charge. Yes, her LED's are not THE BEST quality, but I can't recommend her enough if you're just looking for cheap, low wattage, DIY solutions.

If you're planning on building Red/Blue panels I think you might be better off with a cheap Chinese UFO. If you want White mixed with Red, or Pink, or anything else under the sun, then I think she's your gal. I plan to buy some 24x1W mcpcb's from her if another company is able to make a 1W Warm White package to the specs I'm looking for.
Click to expand...

Nice BS! Thanks for the link! :)
 
Im thinking of getting her 2x 50pcs led circuit boards with 3w leds (red and blue spectrum). A 12v 30A 360w power supply for $45 or a single 200w power supply for each panel ($45 each)

This is the pic of the new power suppy i want to get it should work just plain like that or still need a driver for each panel?
 

Attachments

  • $(KGrHqJHJCoFH1jj7i1FBSB4ujvHbg~~60_1.jpeg
    $(KGrHqJHJCoFH1jj7i1FBSB4ujvHbg~~60_1.jpeg
    31.4 KB · Views: 9
You'd probably need ~30V x ~2.5A or something around there for that mcpcb with 3W LED's. If that's what you want I'm sure Merry can source a suitable driver for you at a reasonable price.
 
A 12v 30A 360w power supply for $45 or a single 200w power supply for each panel ($45 each)
Click to expand...
You'd probably need ~30V x ~2.5A or something around there for that mcpcb with 3W LED's
​
Click to expand...
Why not a constant current Driver either 350mA for 1W or 750mA for 3Watters? All in parallel? What happens if one led Fails and power is diverted through the other strings?​
 
lax123 said:
Why not a constant current Driver either 350mA for 1W or 750mA for 3Watters? All in parallel? What happens if one led Fails and power is diverted through the other strings?​
Click to expand...

Post a link and pic please.
I was thinking of running 10 3w LEDs with one 30-40w cc power supply. So 5 per 50 LED panel.

My 28W LED goes straight from the wall plug to a driver n into the 5mm LEDs but i wonder if i need a power supply and a separate driver to run 150 or 300w.
Power supply (300-350w) + 750mA CC drivers (30-40w) + high power heatsink and fan?

Can the fans be connected to the power supply or do they need individual resistors
 
jackbukc: Those mcpcb's only have two contacts. You'd have to scratch/scrape the black paint off the face, cut/break the copper traces in a few places, possibly drill holes for wires, and then solder directly to the copper trace. It requires more effort to hook a separate driver to each line of LED's than you might immediately think.

I don't understand the second paragraph.

Fans need their own PSU. The fans run at a different voltage and amperage.

-Edit-
Merry actually says she can custom order mcpcb per your specs. You could get a custom mcpcb made that had contacts for each line LED's, but I have no idea how much that would cost. Unless you're hell bent on making your own panels those UFO's look fine to me. They probably comes out to ~$1/Watt which no one can really argue about, imo.
 
jackbukc said:
3 of these 18 x 3w per panel should work without a separate power supply
http://m.ebay.com/itm/221284649328?nav=SEARCH&sbk=1
Click to expand...
Specifications:
Max. Output Power: 150 Watt
Input Voltage: 120 ~ 277 Volt
Output Current: 0.35 A
Output Voltage: 120 ~ 425 V
Click to expand...

That's not what you need. I would seriously consider contacting Merry and having her suggest a driver for you. Let us know what she says. It might depend on how many White/Blue LED's you're using, however, as Blue LED's usually run at a slightly higher voltage.

GL!
 
Oh I was thinking i was guna have to solder the circuit in a chain by myself. So i definetly need a 150w+ driver for each panel.
 
lax123 said:
Why not a constant current Driver either 350mA for 1W or 750mA for 3Watters? All in parallel? What happens if one led Fails and power is diverted through the other strings?​
Click to expand...

I have read all over the web, finding people wiring LED in parallel. If one goes bad, current will probably fry the other diodes, 1 by overloading current and 2) if not current, then heat.

You could fuse each diode possibly for current breaks and a MOV for voltage spike on the AC side or Zener diode on the DC voltage. But many seem unsure about this.
 
You must log in or register to reply here.

Similar threads

SCOTTYBALLS
Help me decide on a LED!
2
Replies
24
Views
4K
couchlock'd
couchlock'd
aavi420
Questions about grow tent & lights
Replies
19
Views
3K
aavi420
aavi420
J
1000W DIY GROW LIGHT BUILD
Replies
0
Views
881
Johnsmithled
J
Blue brother
Height restricted loft grow
Replies
0
Views
954
Blue brother
Blue brother
Blue brother
Height restricted hydroponic loft grow
Replies
13
Views
2K
OneHitDone
OneHitDone
Back
Top