Well like you said, you cant over do it.
tomorrow im going to stir up all the water and flush my unit, make sure everything is clean and fresh.
Dr4g0n3's First Hydroponics grow.
- Thread starter dr4g0n3
- Start date
Well like you said, you cant over do it.
tomorrow im going to stir up all the water and flush my unit, make sure everything is clean and fresh.
Im going to flush tomorrow, didnt have time to fill jugs of water and let the clorine evaporate, ill do it tonight though.
Plants drinking about 3/4 of a gallon per day now,
starting to cut some of the bigger leafs on the bottom that no longer get direct light, they were also starting to block the WW plants, I might of started them too late.
Plants drinking about 3/4 of a gallon per day now,
starting to cut some of the bigger leafs on the bottom that no longer get direct light, they were also starting to block the WW plants, I might of started them too late.
day 23:
Big plant is 16 inches tall now, growing over a inch a day now
Small plant is 11 inches tall now
No nuts yet on these plants.
White widows are 3 inches tall and building leafs.
Not sure if I should trim down the big plant so I can get some more focused light on the white widows.
Big plant is 16 inches tall now, growing over a inch a day now
Small plant is 11 inches tall now
No nuts yet on these plants.
White widows are 3 inches tall and building leafs.
Not sure if I should trim down the big plant so I can get some more focused light on the white widows.
Post some pics.
Don't trim any leaves. Move the plants that are big into their own container.
Peace!!
Google "training MJ" or something like that. Get max yield.
I got this https://www.rollitup.org/indoor-growing/6834-how-lst-low-stress-training.html
and did it, kinda hard to super bend it as the stem is really thick now, but I did it as much as I could, the net cups tilted with it a bit, but not much.
by doing that I lowered the light 6 inches
ill see if I can steal the wifes laptop tonight and post some pictures (dont want to fumble with trying to plug usb cord into back of this computer.)
thanks, had to tie it down again and the top bent up towards the light already, going to make it go around the outside
Excuse the sloppy picture, on laptop at work.
the babies drink 3/4 of a gallon still, give or take some, I dont have to mess with PH much except when I flush the whole system.
I also wait to add nutes until ive gone down past more then a gallon, then ill put it in, that way I dont over do it.
Attachments
day 28
Big plant 21 inches
small plant 16
WW
6inches
4 inches
I did the stress for the big plant and smaller one but bent the stem too far and let up on the stressing, not doing it so extreme.
stressing the node stems currently to keep the shadows off the white widows.
it appears to be all females, I see hair nodes and no nuts, even on the WW's ( they are tiny pistols)
Ill wait to flower until WW's are close to 20 inches, if this includes topping the big plant ill have to do it.
Ordered another hydroponics unit today with matching light. will be ready to clone the WW's in april.
Big plant 21 inches
small plant 16
WW
6inches
4 inches
I did the stress for the big plant and smaller one but bent the stem too far and let up on the stressing, not doing it so extreme.
stressing the node stems currently to keep the shadows off the white widows.
it appears to be all females, I see hair nodes and no nuts, even on the WW's ( they are tiny pistols)
Ill wait to flower until WW's are close to 20 inches, if this includes topping the big plant ill have to do it.
Ordered another hydroponics unit today with matching light. will be ready to clone the WW's in april.
Day 31
Big plant 24 inches - and bushy!
small 18
WW's
10 inches
and 7 inches
running out of height room to raise my lights, thinking of topping about 4 inches down or I can bend it down again, maybe a little less . my new hydro unit was shipped today, should be here in 4-5 days.
Big plant 24 inches - and bushy!
small 18
WW's
10 inches
and 7 inches
running out of height room to raise my lights, thinking of topping about 4 inches down or I can bend it down again, maybe a little less . my new hydro unit was shipped today, should be here in 4-5 days.
Don't cut the tops off, just start slowly bending them over. A little more pressure or weigh each day will get them pointing down and you'll be surprised at how well they will do. You will get a larger yield. Go down to 35% angle.
