Ah ... I see what you guys meant by a floater. But I don't think that a floater works in my set-up.
But you can move things around with a frame. With the wood trim, I was able to move the plant, bucket and frame as one unit. The branches woven through the taut twine provided enough strength to hold the frame in place while in transit. By this point in their lives, the stems are the diameter of a quarter so there is also good strength in the main stalk. I was fortunate to be able to remove the ladies from the tent on those couple of occasions that I needed to.
This lady is on her way from the VEG shelf to the bloom tent
View attachment 5460528
The frames slid into the notch ( you can see the notch just above the frame ) to keep the frame in place. There was just enough gap to allow the screws to slide in easily. But as the wood began to distort, that sliding in and out became a bit tougher. This was why I was thinking of putting cup hooks on the inside as I redesign the frames.
So I am looking to replace the wood trim with the 3/4" PVC and move the screws/hooks that secure the twine from the top to the inside.