Danthebull
Well-Known Member
Hi everyone.

Firstly i would just like to mention to all tho's who were with me for my first grow, a big thank you for all your comments and advise it was muchly apreciated.
So here I go with my next grow...


New room set up.
So after my last grow i decided that i would uptake the black/white pvc and the gaffa tape i had on the floor as this was not able to contain any excess water from the runoff or from flushing. When i took up the said gaffa and pvc i was shocked at what state the carpet looked like. It was black with mold and sodden damp. So i ripped out the carpet and used Jays fluid to scrub the floor and walls. I used my dehumidifier to completly dry up the room, then i repeted the process 2 more times to make sure no nasty's were being left behind.
I then set about building a drainage system, Using timber to build a frame and pvc to catch any water. ( see pics ) I set this at an angle down to the entrance of the room and then used a container i have to collect the run off. ( see pics ) I will be using a pump to flush the plants in the room and another pump in the container to pump out the run off to my outside garden. I then built in a level platform from (tanalised) <<< water proofed timber for the pots to sit on. ( see pics ) Making the frame has made it a dam sight easier to clean the room too.
I purchased 2 new 6 inch cooltubes to fit the room and have them hanging with yoyo's. ( see pics ) This is all connected with 6 inch flex foil duct and then i have installed insulated duct in the attic to mask any heat. ( see pics ) I have kept one of my older 600w lights as this keeps the room at the perfect temp. but i may change this during my grow to another cooltube at some point.
I have moved out my exhaust fan and fitted them on one of the rafters in the attic. ( see pics ) and also changed the positioning of my AC unit intake ducts so that they can have a better spread of oxygen. ( see pics ) I removed the noisy 4" intakes altogether.
I have installed a technics Power star 8 way transformer in the attic and have the plugs from my lights and fans out of the room. ((( Safety first and that )))
I then went and purchased a Hortibox 1.2m x 1.2m x 2m tent ( see pics )so i can use it for cloning and veging. I built in a timber frame and added a T5 light to the top and 2 of my blue 125w CFL to the bottom. ( see pics ) I will be adding another 125w CFL to the bottom when the time come. And a fan. I also purchased 3 propagation tents 1 large 2 small for my clones to sit in. ( see pics ) All three are heated tents to help along with the cloning process.
I purchased some Barneys farm fem Blue cheese seeds x10 about 8-9 weeks ago. ( see pics ) Ans as soon as they arrived i was quick to germ them and pot the 7 that that broke shell in to small pots of coco. And over the last 7-8 weeks have veged them to a copable size for cloning. ( see pics ). 7 days ago i took 150 clones from them and they are now sat in the tents gaining a root mass. In 1 more weeks time i will move the clones to the room to start veg stage. Im not sure how many or how long im going to veg as yet but i will cross that bridge when i come to it. Im also going to take another 200 clones from the mothers in a weeks time and then i will be growing out the mothers with there daughters, but keeping 5-6 of the clones behind as 2nd gen mothers.
I have also just picked up 5 PPP clones from my brother who did not take care of them, they look in a sorry state but i think with some TLC i could bring them back and try keeping them as mothers too.... ( hoping anyway )
I also have some new 13 liter square pots and will be using these for ether 1 plant or splitting the pots with plastic in to 2 or 4 compartments. This is sort of an experiment to see what i can yield from SOG method V's veging... ( see pics )
Also i have some potting containers that hold 28 plant each. I will be using these for the clones when they show root. Then its just a case of transplanting to larger pots. I will also use some of these container for a friend who wants 1000's of clones. and at £6 a clone, well you work it out...
I have taken a picture of my nutes and as you can see i'm sticking with the CANNA products line. I think i should have enought to be going on with for a while....lol
Im Using CANNA pro Coco, perlight and clay pellets as i did in my first grow.
Ok so thanks for checking me out and i hope you come along for the ride. I will be updating on a regular basis and adding pics of everything new, developments, changes. etc etc...
All comments good or bad welcomed...
Dan






Firstly i would just like to mention to all tho's who were with me for my first grow, a big thank you for all your comments and advise it was muchly apreciated.
So here I go with my next grow...



New room set up.
So after my last grow i decided that i would uptake the black/white pvc and the gaffa tape i had on the floor as this was not able to contain any excess water from the runoff or from flushing. When i took up the said gaffa and pvc i was shocked at what state the carpet looked like. It was black with mold and sodden damp. So i ripped out the carpet and used Jays fluid to scrub the floor and walls. I used my dehumidifier to completly dry up the room, then i repeted the process 2 more times to make sure no nasty's were being left behind.
I then set about building a drainage system, Using timber to build a frame and pvc to catch any water. ( see pics ) I set this at an angle down to the entrance of the room and then used a container i have to collect the run off. ( see pics ) I will be using a pump to flush the plants in the room and another pump in the container to pump out the run off to my outside garden. I then built in a level platform from (tanalised) <<< water proofed timber for the pots to sit on. ( see pics ) Making the frame has made it a dam sight easier to clean the room too.
I purchased 2 new 6 inch cooltubes to fit the room and have them hanging with yoyo's. ( see pics ) This is all connected with 6 inch flex foil duct and then i have installed insulated duct in the attic to mask any heat. ( see pics ) I have kept one of my older 600w lights as this keeps the room at the perfect temp. but i may change this during my grow to another cooltube at some point.
I have moved out my exhaust fan and fitted them on one of the rafters in the attic. ( see pics ) and also changed the positioning of my AC unit intake ducts so that they can have a better spread of oxygen. ( see pics ) I removed the noisy 4" intakes altogether.
I have installed a technics Power star 8 way transformer in the attic and have the plugs from my lights and fans out of the room. ((( Safety first and that )))
I then went and purchased a Hortibox 1.2m x 1.2m x 2m tent ( see pics )so i can use it for cloning and veging. I built in a timber frame and added a T5 light to the top and 2 of my blue 125w CFL to the bottom. ( see pics ) I will be adding another 125w CFL to the bottom when the time come. And a fan. I also purchased 3 propagation tents 1 large 2 small for my clones to sit in. ( see pics ) All three are heated tents to help along with the cloning process.
I purchased some Barneys farm fem Blue cheese seeds x10 about 8-9 weeks ago. ( see pics ) Ans as soon as they arrived i was quick to germ them and pot the 7 that that broke shell in to small pots of coco. And over the last 7-8 weeks have veged them to a copable size for cloning. ( see pics ). 7 days ago i took 150 clones from them and they are now sat in the tents gaining a root mass. In 1 more weeks time i will move the clones to the room to start veg stage. Im not sure how many or how long im going to veg as yet but i will cross that bridge when i come to it. Im also going to take another 200 clones from the mothers in a weeks time and then i will be growing out the mothers with there daughters, but keeping 5-6 of the clones behind as 2nd gen mothers.
I have also just picked up 5 PPP clones from my brother who did not take care of them, they look in a sorry state but i think with some TLC i could bring them back and try keeping them as mothers too.... ( hoping anyway )
I also have some new 13 liter square pots and will be using these for ether 1 plant or splitting the pots with plastic in to 2 or 4 compartments. This is sort of an experiment to see what i can yield from SOG method V's veging... ( see pics )
Also i have some potting containers that hold 28 plant each. I will be using these for the clones when they show root. Then its just a case of transplanting to larger pots. I will also use some of these container for a friend who wants 1000's of clones. and at £6 a clone, well you work it out...
I have taken a picture of my nutes and as you can see i'm sticking with the CANNA products line. I think i should have enought to be going on with for a while....lol
Im Using CANNA pro Coco, perlight and clay pellets as i did in my first grow.
Ok so thanks for checking me out and i hope you come along for the ride. I will be updating on a regular basis and adding pics of everything new, developments, changes. etc etc...
All comments good or bad welcomed...
Dan





Attachments
-
IMG_2227.jpg46.2 KB · Views: 272
-
IMG_2215.jpg62.6 KB · Views: 248
-
IMG_2212.jpg60.2 KB · Views: 233
-
IMG_2213.jpg58.2 KB · Views: 274
-
IMG_2214.jpg44.4 KB · Views: 208
-
IMG_2237.jpg53.9 KB · Views: 216
-
IMG_2235.jpg55.2 KB · Views: 202
-
IMG_2238.jpg45.4 KB · Views: 199
-
IMG_2241.jpg52.6 KB · Views: 222
-
IMG_2216.jpg76.7 KB · Views: 229
-
IMG_2243.jpg52.7 KB · Views: 182
-
IMG_2242.jpg77.1 KB · Views: 243
-
IMG_2221.jpg80.7 KB · Views: 200
-
IMG_2228.jpg80 KB · Views: 184
-
IMG_2222.jpg65.2 KB · Views: 189
-
IMG_2240.jpg63.7 KB · Views: 204
-
IMG_2229.jpg70.2 KB · Views: 184
-
IMG_2223.jpg59.7 KB · Views: 173
-
IMG_2220.jpg37.3 KB · Views: 174
-
IMG_2265.jpg47.8 KB · Views: 173
-
IMG_2266.jpg49.7 KB · Views: 152
-
IMG_2262.jpg72 KB · Views: 149
-
IMG_2263.jpg83.5 KB · Views: 146
-
IMG_2264.jpg89.5 KB · Views: 163
-
IMG_2261.jpg53.5 KB · Views: 173
-
IMG_2253.jpg43.9 KB · Views: 140
-
IMG_2230.jpg50.2 KB · Views: 142
-
IMG_2257.jpg102.1 KB · Views: 221
-
IMG_2259.jpg53.1 KB · Views: 187
-
IMG_2255.jpg58.8 KB · Views: 182
-
IMG_2254.jpg85.7 KB · Views: 182
-
IMG_2233.jpg95.3 KB · Views: 209
-
IMG_2231.jpg94.7 KB · Views: 178
-
IMG_2232.jpg106 KB · Views: 231
-
IMG_2256.jpg61.5 KB · Views: 172
-
IMG_2234.jpg90.1 KB · Views: 181
-
IMG_2258.jpg73.4 KB · Views: 201
-
IMG_2246.jpg89.4 KB · Views: 255
-
IMG_2247.jpg120.6 KB · Views: 220
-
IMG_2249.jpg93.8 KB · Views: 220
-
IMG_2248.jpg114 KB · Views: 217
-
IMG_2269.jpg100.9 KB · Views: 227
-
IMG_2250.jpg70.7 KB · Views: 287
-
IMG_2267.jpg104.8 KB · Views: 196
-
IMG_2268.jpg117.4 KB · Views: 179