Fan Filter setup

Aviar

Well-Known Member
Im just a little curious how people with a 600w setup their filter and fan system for the lights to keep cool. Any recommendations on a good setup for less than $200 if possible. are there any brands that just are terrible?
thanks for any replies.
 

fir3dragon

Well-Known Member
You keep the room cool with a lower ambient temp. I use a hydrofarm 6 inch inline and a filter. Vent into roof if needed or if you keep the room cool enough you can vent into the same room.
 

Flagg420

Well-Known Member
i rock a 6" hydrofarm inline, run thru 2 600's and a 400 all in a line, adding an ipower filter in a few days (they have reversible flanges)
 

crawlintbss

Well-Known Member
inline and scubber. i picked up a 200cfm ventech fan, filter, and fan controller for 100$ shipped on amazon. Working great with 4 stinky girls in my tent. no real smell in basement until tent is opened.
 

Aviar

Well-Known Member
i have a roughly a 5x5 tent that is 7 feet tall so 175 cubic feet, right? so i need something larger than that number? I also have to cool my light and pull it through a filter.

I found a 6" - 440cfm Ventech inline fan for 63 shipped off ebay, i plan on getting that with a speed controller and filter all for around $150.
 

fir3dragon

Well-Known Member
i have a roughly a 5x5 tent that is 7 feet tall so 175 cubic feet, right? so i need something larger than that number? I also have to cool my light and pull it through a filter.

I found a 6" - 440cfm Ventech inline fan for 63 shipped off ebay, i plan on getting that with a speed controller and filter all for around $150.
I got the ventech inline fan aswell. I don't use it for my lights I used it to bring cool air from outside, to the grow room (when I live up north). You should be good with the items listed.
 
Top