first time grower!

ok i my seedlings have sprouted 6 to be exact i have them under a very white bright 150 w cfl in a 2x2 closet i ordered general hydroponics organic kit . it should be here this week, for the first three weeks i will use water only every time i feel the pot is light.. but the thing is i need to get my grow room ready im ordering the fans online my room i a 5x2x10 so a 190 cfm should be fine the thing is that i was looking at inline fan and there are this moderm looking ones like vortex and then there a cylinder let me post links http://www.amazon.com/gp/product/B003YFADW8/ref=ox_sc_act_image_1?ie=UTF8&psc=1&smid=ATVPDKIKX0DER


http://www.amazon.com/gp/product/B004YXDQZU/ref=ox_sc_act_image_2?ie=UTF8&psc=1&smid=A2WRS4X4C0GMOQ


can i use either one of the ones im showing you ? or do i need them both?. i want to have the 6 inch but i plan to use a cooling tube and an air filter.. like so im just practicing on the 6 plants they are lame seeds... my nirvana autoflower norternlights will get here soon!! can i just use the

outside< aluminum fan <cooltubelight<filter


or shhould i use


Carbon filter==> Cool Tube Light ==> Inline Fan ===>vented outside


or should i use an exaust van to brin air in from the outside while using (above)?

sorry im ona low budget.

please help i plan to fully give it my best to this guys it would mean a lot to me ! thanks! an

Definitely go with the 440CFM inline fan. In that space, it should exhaust enough air to bring in new air passively.

Personally, I set mine up filter->inline fan->cooltube->exhaust outside. The filter and fan are directly connected (no ducting in between) which makes it much more convenient to hang it up.

-spek

spek9 said:

Definitely go with the 440CFM inline fan. In that space, it should exhaust enough air to bring in new air passively.

Personally, I set mine up filter->inline fan->cooltube->exhaust outside. The filter and fan are directly connected (no ducting in between) which makes it much more convenient to hang it up.

-spek

Click to expand...

the thing is that its in a closet room that has a regular door. so how would i o about letting fresh air in from outside? it would continue sucking the oxyen out of the living plants. or is there away to make c02 enough for 6 small seedlings or 2 plants in a 5x2x10 ? shhould i just make a hole and place ducting connected to an exaust fan to draw air from outside? help"_ thanks

I use a 240 cfm fan for a 400 watt hps in a 30 inch by 30 by 48 grow box, pretty positive you can get away with a cheaper fan.

I grow.in a basement made bedroom. no windows,ans cant drill.thru. I just keep.door.open with a 20"windmachine fan.blowing I. at all times. it workes great

If your going to vent your light, its ALWAYS better to pull than air than to push. I run 6 1000s and i have an 8in 750cfm fan for every 2 lights. But I dont have to worry about bringing in fresh air as I run both AC and a CO2 genni... You could definently get by with the smaller (450cfm) fan for your application. It just always works better to pull air than to try and push it. Keep all ductwork as short and as straight as possible. Any turns or bends should be as gradual and sweeping as possible. I cant remember the exact percentage but every 90 degree bend decreases your airflow a crazy amount. I try to never exceed 45 degrees on my bends. In short it sounds like with a small space like that you could have a passive intake (no fan) i.e open vent,window,or hole.. then run your setup like this ( filter, fan, cooltube, ducting, fan ) the less the fan pushes the more effeicently it will work. Good luck!

welli plan to use 400 hps lights in the 5x2x10 but my question hasnt been answered can i use either of the fans? or do i need one of each? just like 5 plants in a 5x2x10 filter cooltube ..do i need to make c02 in the room? if so how? its my first time growin and im plan to make it happen!!thanks a lot for all te info

great but which fan ? my room is 100 cfm minimum.. can i use te aluminum fan or does it need to the the 440 cfm?

1st off I answered your question, go with the 440cfm fan, I dont really think the other fan will pull enough air to work properly. 2nd I would suggest doing massive research before you start your grow. This website, the internet, and grow books are all good sources. Youll save yourself a ton of headaches. And yes all plants "breathe" CO2, so you either have to exchange the air in the room quite often, or as I do generate your own. You also need to move the air around in your grown room.. I would suggest a wall mount fan. That is very important, if the air in your grow room isnt moving, than the plants use all the CO2 around them. Then being they have nothing to "breathe" they slow and ulltimatley will stop growing. Good luck and do some reseach!