burning24/7
Member
Hey guys,
In a nutshell I’m a 1st year undergrad and am hoping to grow my own at home... Not for profit, merely for self-medication. I'm on a low budget and so I can't afford all the expensive equipment’s a good sum of you guys can, but i think i can still give it a shot and compromise w/ less yield... np for me. I've read some really nice threads here and I think i've become knowledgeable enough to grow my own, though I will undoubtedly need help from you guys throughout the whole process. I hope to have a great experience!
------------------------------------------------------------------------------------------------
My Overall Plan:
- Purchase some seeds online, ideally some w/ high sativa concentration and that don't grow too tall.
- Grow them all, sex the plants (kill the males) and continue growing the female one's to about 1m.
- Then cut the clones of the female plants, and grow them till harvest.
------------------------------------------------------------------------------------------------
Apparatus:
- Buy the seeds (high sativa concentration and that won’t grow too tall)[SUP]1[/SUP].
- Buy plastic cups + pots
- Buy lighting (2 x 55W)
- Buy soil (standard one)
- Buy pH[SUP]3[/SUP] meter and TDS[SUP](not sure which yet)[/SUP] meter.
- Buy nutrients[SUP](not sure which yet...)[/SUP]
- Buy root tone/enhancer[SUP](not sure which yet...)[/SUP]
1 -http://www.marijuana-seeds.nl/northern-lights.html
2 - http://www.htgsupply.com/Product-HTG-Supply-2-Foot-2-Lamp-High-Output-T5-Fixture.asp# or http://www.amazon.co.uk/Hydroponic-Lamp-Plant-Grow-Light/dp/B003ZV5PCY/ref=sr_1_1?ie=UTF8&qid=1328022956&sr=8-1
3 - http://cheaphydroponics.com/store/view-all/gh-ph-control-kit/prod_329.html
------------------------------------------------------------------------------------------------
Step-by-setp Plan:
Here I’m going to explain how I think I will carry out the WHOLE process. I’ll wait for some feedback from you guys until I actually decide to start this out.
Germination and Transplanting
1 - Place the seeds in a wet paper towel. Should take approx. 3 days?
2 - Put some soil inside a big bowl (enough soil to fill the plastic cups that will be used) measure its pH. Use the reagents to shift the soil's pH up or down to approx. 6.0. The soil that will be used first should have a high concentration of Nitrogen, so approx. 20-5-5.
3 - Place the soil inside the plastic cups. Make a small hole, approx. 1.5 cm deep, and place the germinated seed inside. Cover the seed gently. Do I need to water it beforehand?
4 - Use a florescent lamp and fix it at approx. 2.5cm away from the seed. Should this be done for 24hours the first day. Use a 18/6 schedule the following days? Should I adjust the height of the lamps in the succeeding days?
5 - Once the roots hit the bottom I will transplant them to a pot.
I'm still unsure as to how i should be watering the seeds at these initial stages. And should my ppms for the first 10 days is between 100-250?
First Growth
1 - At this stage the light should be approx. 50 cm above. Do I change my lighting at this point to CFL's?
2 - The pot should be filled with another type of soil now, one w/ a higher concentration of Phosphorus and Potassium approx. 5-15-15.
3 - The water I now use will be mixed with nutrients. The nutrients should be high in Phosphorus and Potassium as well? I will also make sure the pH level of the mixture (water + nutrients) is around 6.0.
4 - The ppms for the first 10 days should be around 200. After this initial phase I should increase them to roughly 500 for a period of 2 to 3 weeks. After this i shall increase them again to 900 and gradually raise them until necessary capping my ppms at 1300.
Sexing
1 - Spot the males and kill them.
2 - Let the females grow enough (~1m) to make clones of approx. 5 cm.
3 - The clones should be cut at the nodes at an anlge of 45º. These should then be wet w/ water, dressed w/ a root enhancer and then quickly (to prevent air bubbles) fixed into the soil. I should also make sure it's well fixed in the soil.
Clones (starting again)
1 - The clones should be misted daily w/ water for around 10days to 2 weeks.
2 - They should be continuously subject to fluorescent light during the first 24hours. The first 3 to 4 days the lamps should be kept 12 cm above the clones. They should then be moved closer to approx. 2.5cm until roots start emerging. I will probably water them 2 or 3 times before roots start emerging. These will be in 5 day intervals and the ppms during these days should be very low. During the first watering at approx. 0, on the second watering at approx.. 100 and in the third watering at approx. 250.
3 - Once the roots reach the bottom they should be transplanted to bigger pots and the lamps should now be at 50cm from these growing clones.
Clones (growing process)
1 - Once the clones are in the pot I will gradually increase the ppms from 400 through 600 up to 1000.
2 - At this stage they should be drinking approx. every 3 days.
3 - When the plants have grown significantly I will switch to a 12/12 light schedule, give the plants 1/2 strength grow and a good sum of bloom nutrients.
Buds
1 - When the buds start to show I will cut all grow nutrients supply, and mainly feed them bloom. The ppms at this stage should be around 1100.
2 - When the buds start to form keep giving them bloom and increase the ppms slightly to 1200.
3 - When i start sees the colored hairs i will give them a good sum of bloom mixture and then only give them water on the succeeding waters.
Harvest
1- When the plants have big buds, that don't appear to be filled only w/ air i will cut the plants and hang them for as long as 3 days.
All feedback is very much appreciated!
In a nutshell I’m a 1st year undergrad and am hoping to grow my own at home... Not for profit, merely for self-medication. I'm on a low budget and so I can't afford all the expensive equipment’s a good sum of you guys can, but i think i can still give it a shot and compromise w/ less yield... np for me. I've read some really nice threads here and I think i've become knowledgeable enough to grow my own, though I will undoubtedly need help from you guys throughout the whole process. I hope to have a great experience!
------------------------------------------------------------------------------------------------
My Overall Plan:
- Purchase some seeds online, ideally some w/ high sativa concentration and that don't grow too tall.
- Grow them all, sex the plants (kill the males) and continue growing the female one's to about 1m.
- Then cut the clones of the female plants, and grow them till harvest.
------------------------------------------------------------------------------------------------
Apparatus:
- Buy the seeds (high sativa concentration and that won’t grow too tall)[SUP]1[/SUP].
- Buy plastic cups + pots
- Buy lighting (2 x 55W)
- Buy soil (standard one)
- Buy pH[SUP]3[/SUP] meter and TDS[SUP](not sure which yet)[/SUP] meter.
- Buy nutrients[SUP](not sure which yet...)[/SUP]
- Buy root tone/enhancer[SUP](not sure which yet...)[/SUP]
1 -http://www.marijuana-seeds.nl/northern-lights.html
2 - http://www.htgsupply.com/Product-HTG-Supply-2-Foot-2-Lamp-High-Output-T5-Fixture.asp# or http://www.amazon.co.uk/Hydroponic-Lamp-Plant-Grow-Light/dp/B003ZV5PCY/ref=sr_1_1?ie=UTF8&qid=1328022956&sr=8-1
3 - http://cheaphydroponics.com/store/view-all/gh-ph-control-kit/prod_329.html
------------------------------------------------------------------------------------------------
Step-by-setp Plan:
Here I’m going to explain how I think I will carry out the WHOLE process. I’ll wait for some feedback from you guys until I actually decide to start this out.
Germination and Transplanting
1 - Place the seeds in a wet paper towel. Should take approx. 3 days?
2 - Put some soil inside a big bowl (enough soil to fill the plastic cups that will be used) measure its pH. Use the reagents to shift the soil's pH up or down to approx. 6.0. The soil that will be used first should have a high concentration of Nitrogen, so approx. 20-5-5.
3 - Place the soil inside the plastic cups. Make a small hole, approx. 1.5 cm deep, and place the germinated seed inside. Cover the seed gently. Do I need to water it beforehand?
4 - Use a florescent lamp and fix it at approx. 2.5cm away from the seed. Should this be done for 24hours the first day. Use a 18/6 schedule the following days? Should I adjust the height of the lamps in the succeeding days?
5 - Once the roots hit the bottom I will transplant them to a pot.
I'm still unsure as to how i should be watering the seeds at these initial stages. And should my ppms for the first 10 days is between 100-250?
First Growth
1 - At this stage the light should be approx. 50 cm above. Do I change my lighting at this point to CFL's?
2 - The pot should be filled with another type of soil now, one w/ a higher concentration of Phosphorus and Potassium approx. 5-15-15.
3 - The water I now use will be mixed with nutrients. The nutrients should be high in Phosphorus and Potassium as well? I will also make sure the pH level of the mixture (water + nutrients) is around 6.0.
4 - The ppms for the first 10 days should be around 200. After this initial phase I should increase them to roughly 500 for a period of 2 to 3 weeks. After this i shall increase them again to 900 and gradually raise them until necessary capping my ppms at 1300.
Sexing
1 - Spot the males and kill them.
2 - Let the females grow enough (~1m) to make clones of approx. 5 cm.
3 - The clones should be cut at the nodes at an anlge of 45º. These should then be wet w/ water, dressed w/ a root enhancer and then quickly (to prevent air bubbles) fixed into the soil. I should also make sure it's well fixed in the soil.
Clones (starting again)
1 - The clones should be misted daily w/ water for around 10days to 2 weeks.
2 - They should be continuously subject to fluorescent light during the first 24hours. The first 3 to 4 days the lamps should be kept 12 cm above the clones. They should then be moved closer to approx. 2.5cm until roots start emerging. I will probably water them 2 or 3 times before roots start emerging. These will be in 5 day intervals and the ppms during these days should be very low. During the first watering at approx. 0, on the second watering at approx.. 100 and in the third watering at approx. 250.
3 - Once the roots reach the bottom they should be transplanted to bigger pots and the lamps should now be at 50cm from these growing clones.
Clones (growing process)
1 - Once the clones are in the pot I will gradually increase the ppms from 400 through 600 up to 1000.
2 - At this stage they should be drinking approx. every 3 days.
3 - When the plants have grown significantly I will switch to a 12/12 light schedule, give the plants 1/2 strength grow and a good sum of bloom nutrients.
Buds
1 - When the buds start to show I will cut all grow nutrients supply, and mainly feed them bloom. The ppms at this stage should be around 1100.
2 - When the buds start to form keep giving them bloom and increase the ppms slightly to 1200.
3 - When i start sees the colored hairs i will give them a good sum of bloom mixture and then only give them water on the succeeding waters.
Harvest
1- When the plants have big buds, that don't appear to be filled only w/ air i will cut the plants and hang them for as long as 3 days.
All feedback is very much appreciated!