Franchise88
Member
I am thinking of starting a new grow, I have grown outdoors with success before.
My plan is to take an old dresser and gut it for a setup.
That or build a dresser that looks natural myself that is ready to get a grow put in.
The problem is I do not know the first thing about indoor growing. I could write a long paragraph about what I plan to do but I am afraid that the details would get lost in translation in my rambling lol... so I will just list the details below.
Number of Plants: 2-3 Full Plants OR 5-6 Autoflowers
Chambers: One, I do not need a cycle for continuous harvests as it is for personal use.
Medium: Hydroton, or something similar.
Container: Custom Built 2 Gallon buckets on a feeding system that draws nutes and water from the reservoir at the bottom and releases at the top to have it running around the root system at all times.
That is really all I have for now. I have a few questions though... which I will list for ease again:
1. Can an indoor grow run on the same light? I know auto's can but can normal plants run under the same HPS light with just a different cycle for veg/flowering?
2. What size light do I need for this? The guy at the Hydro store said a 250W HPS light would run 2 plants easily.
3. I need this to be on the down low as my parents and friends visit all the time, what fan should I buy that is quite? What size and how many do I need?
4. Can anyone link me to a tutorial on setting up a grow box/dresser? I can adapt the instructions to fit my grow.
5. Odor to me would not be an issue, but as stated with the friends and family coming over I would prefer to block it... I was told to look into Carbon filters but how would I set those up with the fans?
6. If I am missing anything do you have any suggestions?
7. How is every one doing tonight?
Here is my plan so far on the build, but this is just me spit balling ideas around let me know if I should change anything.
Take an average dresser and gut the entire inside. Mount the drawers onto a piece of MDF board and back onto the dresser. I am going to institute a hinge system so I can secure the drawers on the MDF to the dresser but I can release it when I need to get in.
Coat the entire inside of the dresser in Panda Film then on top of that a reflective WHITE film. Cut holes in the back for the fan(s) and build a light trap to extend and cover the fan.
Hang the lights near the top of the dresser on chains so I can lower/raise as I see fit. I will mount a small fan in the top corner of the dresser oscillating to circulate the air inside the dresser.
I will have the plants each in their respective 2 Gallon containers with a small distance between them (not much room but enough to fit 6 containers if needed) for outward growth.
Of course I will have the ballast on the outside of the dresser but hidden behind it as well as all of the wires I can run through a hole only big enough to group and run them.
I know it may seem, well to me at least, like I know for the most part what I am talking about but I really don't I just did a lot of research before I came to ask for help. I am a strong believer in the the "Search Button" so I did as much research as I could before breaking down and asking for help. So this is where I turn it over to the experts here
Like I said this is a small grow for personal use, well for my girlfriend she has come up with some issues and her doctor recommended smoking but due to people not understanding the medicinal uses of MJ I have to resort to this. If it wasn't for my job and the frequency of drug tests for me I would still be a daily smoker myself
Ahh and the dimensions of the dresser are not important I will build one dependent on the space I need myself if needed or I will pick up a scrap dresser from around town and gut it.
I will need it to fit in a closet so I would say width wise I only have about 3-4 Feet... Height wise I could care less it will just look like a clothes dresser in the back of a closet.
Thanks in advance for all advice and tips,
Franchise88
My plan is to take an old dresser and gut it for a setup.
That or build a dresser that looks natural myself that is ready to get a grow put in.
The problem is I do not know the first thing about indoor growing. I could write a long paragraph about what I plan to do but I am afraid that the details would get lost in translation in my rambling lol... so I will just list the details below.
Number of Plants: 2-3 Full Plants OR 5-6 Autoflowers
Chambers: One, I do not need a cycle for continuous harvests as it is for personal use.
Medium: Hydroton, or something similar.
Container: Custom Built 2 Gallon buckets on a feeding system that draws nutes and water from the reservoir at the bottom and releases at the top to have it running around the root system at all times.
That is really all I have for now. I have a few questions though... which I will list for ease again:
1. Can an indoor grow run on the same light? I know auto's can but can normal plants run under the same HPS light with just a different cycle for veg/flowering?
2. What size light do I need for this? The guy at the Hydro store said a 250W HPS light would run 2 plants easily.
3. I need this to be on the down low as my parents and friends visit all the time, what fan should I buy that is quite? What size and how many do I need?
4. Can anyone link me to a tutorial on setting up a grow box/dresser? I can adapt the instructions to fit my grow.
5. Odor to me would not be an issue, but as stated with the friends and family coming over I would prefer to block it... I was told to look into Carbon filters but how would I set those up with the fans?
6. If I am missing anything do you have any suggestions?
7. How is every one doing tonight?
Here is my plan so far on the build, but this is just me spit balling ideas around let me know if I should change anything.
Take an average dresser and gut the entire inside. Mount the drawers onto a piece of MDF board and back onto the dresser. I am going to institute a hinge system so I can secure the drawers on the MDF to the dresser but I can release it when I need to get in.
Coat the entire inside of the dresser in Panda Film then on top of that a reflective WHITE film. Cut holes in the back for the fan(s) and build a light trap to extend and cover the fan.
Hang the lights near the top of the dresser on chains so I can lower/raise as I see fit. I will mount a small fan in the top corner of the dresser oscillating to circulate the air inside the dresser.
I will have the plants each in their respective 2 Gallon containers with a small distance between them (not much room but enough to fit 6 containers if needed) for outward growth.
Of course I will have the ballast on the outside of the dresser but hidden behind it as well as all of the wires I can run through a hole only big enough to group and run them.
I know it may seem, well to me at least, like I know for the most part what I am talking about but I really don't I just did a lot of research before I came to ask for help. I am a strong believer in the the "Search Button" so I did as much research as I could before breaking down and asking for help. So this is where I turn it over to the experts here
Like I said this is a small grow for personal use, well for my girlfriend she has come up with some issues and her doctor recommended smoking but due to people not understanding the medicinal uses of MJ I have to resort to this. If it wasn't for my job and the frequency of drug tests for me I would still be a daily smoker myself
Ahh and the dimensions of the dresser are not important I will build one dependent on the space I need myself if needed or I will pick up a scrap dresser from around town and gut it.
I will need it to fit in a closet so I would say width wise I only have about 3-4 Feet... Height wise I could care less it will just look like a clothes dresser in the back of a closet.
Thanks in advance for all advice and tips,
Franchise88