Bashar Assad
Member
Okay so after about a two months of researching and browsing forums I think I finally have my final set up nailed down, here we go, I think this is pretty good…..
Gear
4x2x6 foot mylar lined grow tent
2 five gallon drip system buckets w/ 6" net baskets and 6" drip ring, water is pumped with a 70 gph pump on a 15 min increment analogue timer
2.5" x 3" (dxh) air stones connected to an air pump
300w (100 x 3w) 6-band/ir/uv LED
240w (80 x 3w) blue/white LED
150w (50 x 3w) red LED
60w (20 x 3w) blue/white/uv LED
(all LED's connected to a 15 minute increment analogue timer)
adjustable pulley hooks for the lights
25L capacity water chiller fed by a 70gph linked between the 2 buckets
12" intake air desk top fan
4" duct fan (200 cfm, 183 watt) w/controller + carbon filter
2 ona pucks to keep in the tent
0.0-14.0 pH/0.0*C-50.0*C temp. meter w/ easy 3 point dip and click calibration
pH calibration solutions (4.01 7.00 10.01)
0-9999 ppm TDS/0.0-50.0*C temp meter
TDS calibration solution (1000 ppm)
Digital Thermometer/Hygrometer
IR thermometer for spot readings of *c/*f
2 analoge 15 minute increment double outlet timers (for lights and dripper)
AN Grow/Bloom/Micro nutrients
Aqua shield root protecting/promoting solution
Germination pH balanced nutrients/hormones
30 ml nutrient syringe
pH up/pH down/drip test pH testing solution
7 outlet surge protected power bar
This will all be set up in my bedroom which is about 350 sqft and has a 3x3 foot window in it north facing. The average room temp. is 28*C and the RH% is 50 on average. The tent will on the side wall of the room with the exhaust facing out towards the window (no duct) and other than my bed and night stand there will be nothing out in my bedroom. The only things that will be in the tent will be the buckets, lights and fans. Everything else (air pumps, etc) will be outside of the tent and have their lines run in thru port holes.
How does this set up look? I've read a lot of articles and forum postings and this seems like it will make for a nice set up for growing 2 auto flowers. Any advice is much appreciated!
Gear
4x2x6 foot mylar lined grow tent
2 five gallon drip system buckets w/ 6" net baskets and 6" drip ring, water is pumped with a 70 gph pump on a 15 min increment analogue timer
2.5" x 3" (dxh) air stones connected to an air pump
300w (100 x 3w) 6-band/ir/uv LED
240w (80 x 3w) blue/white LED
150w (50 x 3w) red LED
60w (20 x 3w) blue/white/uv LED
(all LED's connected to a 15 minute increment analogue timer)
adjustable pulley hooks for the lights
25L capacity water chiller fed by a 70gph linked between the 2 buckets
12" intake air desk top fan
4" duct fan (200 cfm, 183 watt) w/controller + carbon filter
2 ona pucks to keep in the tent
0.0-14.0 pH/0.0*C-50.0*C temp. meter w/ easy 3 point dip and click calibration
pH calibration solutions (4.01 7.00 10.01)
0-9999 ppm TDS/0.0-50.0*C temp meter
TDS calibration solution (1000 ppm)
Digital Thermometer/Hygrometer
IR thermometer for spot readings of *c/*f
2 analoge 15 minute increment double outlet timers (for lights and dripper)
AN Grow/Bloom/Micro nutrients
Aqua shield root protecting/promoting solution
Germination pH balanced nutrients/hormones
30 ml nutrient syringe
pH up/pH down/drip test pH testing solution
7 outlet surge protected power bar
This will all be set up in my bedroom which is about 350 sqft and has a 3x3 foot window in it north facing. The average room temp. is 28*C and the RH% is 50 on average. The tent will on the side wall of the room with the exhaust facing out towards the window (no duct) and other than my bed and night stand there will be nothing out in my bedroom. The only things that will be in the tent will be the buckets, lights and fans. Everything else (air pumps, etc) will be outside of the tent and have their lines run in thru port holes.
How does this set up look? I've read a lot of articles and forum postings and this seems like it will make for a nice set up for growing 2 auto flowers. Any advice is much appreciated!