Gypsy's Picture Depot

gyspy cant wait to see how the grafting goes. i wanted to try it to but think i will wait and see how urs does

Thanks alot for all of the info. Obviously being a noob im trying to go for the most efficient(economically and spatially) setup i can afford. I know im not going to reinvent the wheel at this stage, so why even attempt to haha.

You mentioned fitting one 3x3 tray in the tent, but the reason I didnt mention E&F or even dwc was because i can see nutes being a huge problem. Every plant would be on the same nutes, correct me if im wrong, but thats why Al has his 4 different tables.

I mentioned Hempy because i read the Hempy Collectivel thread and liked what i saw and it seemed very simple and easy.

As for the tent i figured at least for my first id just purchase one to save all the hassle of trying to get it just right. The GL series tents that would fit me space would be the GL80 which is 2'7x2'7x5'11 or the GL80l which is 2'7x4'11x6'7. Would A 600 watt cooltubed be too much for that?

Continuing reading the al thread ill get back to you with any more questions
again thanks for the help

I am not sure if Al. ever did set up all 4 tanks...

I didn't...

I run 5.8pH and 1400PPM on ALL of my clones.. from day one to harvest..

quite a few of us SOGers running one res without issues...

My set up uses...

1 nute @ 1400 ppm...

50% grade h2o2 @ 1ml per liter...

pH 5.8...

the end... from day one to harvest...

gypsy my temps are runnin 85 in the room already...So an AC is a MUST if i want to setup in the tent matter of fact thats the first thing i have to get cause it gonna be STEAMIN inside that tent!

ok 85 in the room is bad...

are you going to ac the whole room or just the tent?

Man, I use the same tent, I just leave it open when the lights are on.

I wake up at 6 to open the tent right when the lights come on, then I get ready for work. I come home at 4, check on everything, take pictures, whatever, then at 6 I close them back up.

My temps run about 75-80 at all times.

GypsyBush said:

I am not sure if Al. ever did set up all 4 tanks...

I didn't...

I run 5.8pH and 1400PPM on ALL of my clones.. from day one to harvest..

quite a few of us SOGers running one res without issues...

My set up uses...

1 nute @ 1400 ppm...

50% grade h2o2 @ 1ml per liter...

pH 5.8...

the end... from day one to harvest...

Click to expand...

Oh sweet, that was my one concern. Looks like in a couple weeks ill be starting a E&F. Been reading Als thread (wow 200 pages) and figured I could fit 4 plants/sqft and figured I could get around 1/2oz per plant. I think getting a GL80 (2'7x2.7) and putting in a 400hps which gives me 59watts/sqft and putting around 20 in and pulling 3. What do ya think. Ill be sure to post pics when i figure everything out so you know your help didnt go to waste haha

FoxCompany426 said:

Man, I use the same tent, I just leave it open when the lights are on.

I wake up at 6 to open the tent right when the lights come on, then I get ready for work. I come home at 4, check on everything, take pictures, whatever, then at 6 I close them back up.

My temps run about 75-80 at all times.

Click to expand...

Fox... the room that the tent sits in is 85F... that's in the room temp not the tent...

He needs to cool it...

85F in the room can easily mean 90+ in the tent... even with adequate ventilation... cause you cooling with 85F... not very cool...

mdave said:

Oh sweet, that was my one concern. Looks like in a couple weeks ill be starting a E&F. Been reading Als thread (wow 200 pages) and figured I could fit 4 plants/sqft and figured I could get around 1/2oz per plant. I think getting a GL80 (2'7x2.7) and putting in a 400hps which gives me 59watts/sqft and putting around 20 in and pulling 3. What do ya think. Ill be sure to post pics when i figure everything out so you know your help didnt go to waste haha

Click to expand...

I wish you all the best bro...

Just make sure we get to see it...

I just had to post this...

I can't help but to laugh ...

I tried my best to help him make the best of what he has... but it appears I don't know enough to help him...

I guess I am just out of his league...

https://www.rollitup.org/grow-room-design-setup/210449-building-single-plant-growbox-i.html

Fractus said:

Gypsy if you were actually trying to help I wouldn't mind but ... you didn't tell me a single useful thing

Click to expand...

Fractus said:

You really need to see the box's performance in person to understand why I believe in it. It is getting very close to the same temperatures and light (if not more) than what it would be getting if it were an outdoor plant. ...

Click to expand...

GypsyBush said:

I just had to post this...

I can't help but to laugh ...

I tried my best to help him make the best of what he has... but it appears I don't know enough to help him...

I guess I am just out of his league...

https://www.rollitup.org/grow-room-design-setup/210449-building-single-plant-growbox-i.html

Click to expand...

Hehehe...

wow gypsy that thread pissed me off how stupid fractus was..all your advice was spot on and yet he couldnt handle it.

Man you gotta luv the foambox grow..i had to touch on sumthin over there,,just dumb man dumb

Katatawnic said:

Gypsy, can't reply to your PM.

"GypsyBush has exceeded their stored private messages quota and cannot accept further messages until they clear some space."

Click to expand...

That is not surprising at all...

Wow Gypsy. You were more patient than he deserved....

I hope I wasn't that frustrating back in my CFL days lol

Thats a great thread!!!

Haha I just came here to look at Gypsy's photos again and everyone's talking about the same tread I've been thinking about. I think both parties were kinda off (as far as communication), but that guy has to realize that the burden of social niceties is always on the noob...in anything you do. As a gro noob myself, I would say that the most important thing you can do for your success is to be gracious to the people who help you. Cause otherwise they're not gonna help you again, and you have to keep asking a million different people, and you get advice that doesn't match previous input, and you get pissed again, and you exhaust all reliable resources, and end up going through the tragically hilarious noob process written by Al B. Fuct and linked to fructus' thread by Gypsy.

By the way, I saw how your always cruisin the web for interesting random things Gypsy. My girl showed me this site the other day called stumbleupon.com it's real cool you should check it out

I was just short with him...

I didn't like his attitude from day one.. I'm too old to deal with crap... I already shoveled my shit...

But personality differences aside...

I gave him the info... no flowers attached... but no offense meant either...

We don't have to be friends for me to help him... I like to share... and I have the time...

Oh well.... I'm not missing anything...

In fact... I am pretty stoked right now....

southern homegrower said:

gyspy cant wait to see how the grafting goes.

Click to expand...

So here is my first grafting attempt...

two small branches pruned from another plant were grafted onto the rootmass and stalk from one of the lollipops I just chopped...

It's been 48 hours and all seems well...

the leaves were already deformed, that was not caused by the graft...

I can see water leaking around the grafts.. so it seems they should take...

Next time I will get some sealing wax and a sharp blade...

I split the top... and I oggered a hole with the fork on the side... kinda crude... but they are still alive...

Katatawnic said:

Gypsy, can't reply to your PM.

"GypsyBush has exceeded their stored private messages quota and cannot accept further messages until they clear some space."

Click to expand...

Try now...

purpdaddy said:

Man you gotta luv the foambox grow..i had to touch on sumthin over there,,just dumb man dumb

Click to expand...

Hey .. I didn't like it... I think it's dangerous...

But he's gonna do it regardless... so I thought I'd at least help the guy yield something worth his time... and risk...