Harvest a Pound Every Three Weeks!

mindphuk

mindphuk

Well-Known Member
I'm going back to a 2 post system. I find that the water pressure in the center is lower than the 2 sides, requiring a bigger pump.
 
D

Donk

Active Member
Shrike said:
Hey Donk...hope all is going well with your grow. You still going to have to pull it soon? Hope not.

I was wondering if you can still going to put up some more pics and the measurements? Also, would love to see the changes you can make to have a smaller footprint for the unit. Thanks!:peace:
Click to expand...
I have not shut down yet lol not gonna till they get on my case. Ended up being busy so only got some of the new one build but here is a pic of how to shave 4 inches off. I am gonna throw another union between the T and the gulley after everthing is ready. I am gonna make new one with 4 foot rails cause I am probable gonna move so I will be ready.

As you can see on the current unit its a few inches over 4 feet cause of the pump in the res. So with my new lil mod the res will sit completing underneath. What I like about my mods is you have full access to res and the ability to break it down easy.

Well here is my 18 unit. I think some of the girls where too tall. I am still learning them and the last pic is there mom's ( cindy99 from seed) in coco. In a few weeks I will have my one or 2 keepers and it will be able to have more uniform growth.
 

Attachments

SOG

SOG

Well-Known Member
anyone run Super Silver Haze strain with over 4000ppm soup?
i accidentally been running mine for over a week now with almost 4k ppm
the girls seem to be growing like crazy,
or maybe i am reading them wrong
and they aren't doing so well,
anyway i dropped them back to 2000ppm today
but since they didn't seem to get any nute burn, i was wondering why





:joint::peace:
 
robotninja

robotninja

Well-Known Member
I grew SSH in stinkybuds system. She burned at anything over 1,500 ppm's. I didn't use co2, but still., very sensitive to ppm's.

When she climbed over 2k, she burned, burned badly at that. Effected yield and taste, don't run her high. Trust me!
 
L

LionsRoor

Well-Known Member
SOG said:
anyone run Super Silver Haze strain with over 4000ppm soup?
i accidentally been running mine for over a week now with almost 4k ppm
the girls seem to be growing like crazy,
or maybe i am reading them wrong
and they aren't doing so well,
anyway i dropped them back to 2000ppm today
but since they didn't seem to get any nute burn, i was wondering why





:joint::peace:
Click to expand...
Hmmm - I wonder if that meter is calibrated? 2000 for SSH is generally considered very high! 4000 makes me really wonder???
 
Shrike

Shrike

Well-Known Member
Nice setup and mod's, Donk. Thanks for the pic's and update us when you have it all the way you want it.

Donk said:
I have not shut down yet lol not gonna till they get on my case. Ended up being busy so only got some of the new one build but here is a pic of how to shave 4 inches off. I am gonna throw another union between the T and the gulley after everthing is ready. I am gonna make new one with 4 foot rails cause I am probable gonna move so I will be ready.

As you can see on the current unit its a few inches over 4 feet cause of the pump in the res. So with my new lil mod the res will sit completing underneath. What I like about my mods is you have full access to res and the ability to break it down easy.

Well here is my 18 unit. I think some of the girls where too tall. I am still learning them and the last pic is there mom's ( cindy99 from seed) in coco. In a few weeks I will have my one or 2 keepers and it will be able to have more uniform growth.
Click to expand...
 
Shrike

Shrike

Well-Known Member
Yeah...I remember some years ago when I was growing SSH...it is a bit twitchy about how high you can go with nutes. 4000 pretty much seems impossible...check you meter?:peace:

SOG said:
anyone run Super Silver Haze strain with over 4000ppm soup?
i accidentally been running mine for over a week now with almost 4k ppm
the girls seem to be growing like crazy,
or maybe i am reading them wrong
and they aren't doing so well,
anyway i dropped them back to 2000ppm today
but since they didn't seem to get any nute burn, i was wondering why





:joint::peace:
Click to expand...
 
dagobaker

dagobaker

Well-Known Member
never easy getting things to work right in the beginning......its a struggle
im still working on things 8 months later
 
hehehemann

hehehemann

Well-Known Member
bigb1987 said:
do any of you guys find you need to run a water chiller in you stink systems or does it do fine without?
Click to expand...
A few factors - a larger reservoir keeps the water cooler, ambient temps, location, etc.
I personally do need a water chiller. I have had to pretty much stop my grow because of reservoir temps getting too high.
You can fill 2 liter bottles of water and freeze them and pop these in as a temporary solution.
Another alternative to a high priced chiller is to mod a window AC unit. (I'm presently researching this solution)
 
SOG

SOG

Well-Known Member
hehehemann said:
A few factors - a larger reservoir keeps the water cooler, ambient temps, location, etc.
I personally do need a water chiller. I have had to pretty much stop my grow because of reservoir temps getting too high.
You can fill 2 liter bottles of water and freeze them and pop these in as a temporary solution.
Another alternative to a high priced chiller is to mod a window AC unit. (I'm presently researching this solution)
Click to expand...
you can find excellent deals on a used Arctica chillers on craigslist.net in your area




:joint::peace:
 
StinkBud

StinkBud

Well-Known Member
LionsRoor said:
No - heat is not a problem with the 633.

Here are some pics for ya - I have been meaning to post some. Hope they inspire!
Click to expand...
Wow! I love it! Super clean and professional. By far one of the nicest mods I've seen.

We should call it Super StinkBud or SS....
 
whysohigh

whysohigh

Well-Known Member
heres the drain i got goin in mine the grommets are pretty cheap and its a nice seal, you can pick the unit up by the drain pipe and it wont come out.
 

Attachments

You must log in or register to reply here.
Top