Harvest a Pound Every Three Weeks!

DIRTHAWKER said:

GENFRANCO Yea i figured that... but isnt there some indoor growing software out there somewhere? I can visualize everytrhing in the grow room plugged into some kind of box that is hooked to the computer, the software has different setting for each and every plug,, lights, exhaust, pumps, co2,etc.
you just set each one at the setting you want. Its not very complicated it seems simple enough.

Click to expand...

I'm new around riu and have read this thread through 158 in the last few days. I found a solution to the above that some with an extra arm and leg might find useful: http://www.growtronix.com/store/. Pretty expensive, but looks sweet.

I'd like to thank Stink, Dirt, and everybody else in this thread for the great info so farkiss-ass.

I hope to try a scaled down version when i get the chance.

I didnt see a price, how much was it?

sum bud pic cant wait till i get a cam the sugar on this plant crazy check out my grow jornalkiss-ass

andyman,

I didn't see a price for the software either, but just a CO2 controller base package is $1,299.00, while a Master Control package (temp & humidity sensors, relay, software and dual controlled outlets) is $978. I couldn't find a price for software alone.

Master Control Package: http://www.growtronix.com/store/index.php?main_page=product_info&cPath=1&products_id=2

check out my jornal

http://www.youtube.com/watch?v=qLI8GKyEUAM Never get Busted Growing weed.

try here for cycle timer cheapest i've seen

http://www.plantlightinghydroponics.com/cap-nft1e-1minute-on-4minutes-off-preset-recycle-timer-p-1725.html

andyman,

It looks like the software is included in both of the base system packages. Temp and humidity sensors with 2 controlled outlets is just under $1k.

yummy77552 said:

this thread I think has lost its steam... but what a run it has had!!!

Click to expand...

This thread ebbs and flows! I guess we are just bored with all the dank we are harvesting with this system! ha ha

I for one am super happy with the system and have things pretty dialed! I think many others are in the same boat - we need some problems, huh? haha

I will try to stoke the flame with some harvest shots in the next couple days. I have yet to actually final trim it all, but the yield is acceptable and the quality is off the hook!

I attended the first THC Expo at the LA Convention Center last weekend and had the chance to throw some Stink OG at some folks... people were trippin! There was an 'informal' tasting at the after-party, and the Stink OG came out way on top. I won't drop names - but let's just say there were some serious stoners in attendance!

Again - I am really happy with the system and the results! Thanks, Stink!

OK my question is how many aero systems are in the flowering room ONLY?? in order to receive a pound every 3 weeks if I recall it was 3 systems with 14 plants in each system PLZ PLZ answer so I can get started on my project and thanx for ALL the info you provided everybody!!!!

j20092009 said:

OK my question is how many aero systems are in the flowering room ONLY?? in order to receive a pound every 3 weeks if I recall it was 3 systems with 14 plants in each system PLZ PLZ answer so I can get started on my project and thanx for ALL the info you provided everybody!!!!

Click to expand...

You are correct - 3 x 14 site setup for Stink. You exact yields per 14 rack unit will vary by strain and grow methods, etc. The thing to take away from this thread is the concept. You can customize the system to meet your needs. Stink's first harvests were closer to 12oz. CO2, light, and other techniques, more than doubled his harvests to as much as 27 oz per rack! If you can match those yields, just 9 sites could yield a pound+!

j20092009 said:

OK my question is how many aero systems are in the flowering room ONLY?? in order to receive a pound every 3 weeks if I recall it was 3 systems with 14 plants in each system PLZ PLZ answer so I can get started on my project and thanx for ALL the info you provided everybody!!!!

Click to expand...

3 systems with 14 plants in each system

just wondering if im the only one that thinks 7 in each post is too much?
if i was putting plants in at under 12 inches maybe.....but i like to put them in at 16 inches..........i like 5 in each post.......20 under each 600 hps light......get an ounce per plant puts me at a gram per watt

dagobaker said:

just wondering if im the only one that thinks 7 in each post is too much?
if i was putting plants in at under 12 inches maybe.....but i like to put them in at 16 inches..........i like 5 in each post.......20 under each 600 hps light......get an ounce per plant puts me at a gram per watt

Click to expand...

The newest system i built is only 4 sites per post/8 plants per unit . started them at 10" and each hole 12" after that, using a 50" post. im putting them in at about 24-36 inches and hoping for 3 ozs per plant. = 24 oz per unit. dont think its impossible, just worried the 600w wont pentrate but we shall see.

Chef

I use 600w also.... but i don't think it will be able to penetrate too deep.... all those leaves won't let any light to the bottom branches...
have anyone done less than 14 plants per unit, using the 600w lights, if so what was the yield per plant?

well im using the 600 hps but in my 2 previous grows they were the 7 plants each
my next 3 are 6.....7.......and 8(i cant count lol)
but now im making all of mine 5
that way i can try and achieve the ounce per plant and 20 oz per 600 or just under a gram per watt
in all honesty ill probably hit more than the 10 oz per unit or 20 oz per 2 units per light but this plant (romulus) is taking 10 weeks instead of my normal 8 weeks

Hey Stink, you still doing 2 week flushes? Or just 1 now?

Trying to clarify before I start my first flush

1. Drain the res of all water/nutes.
2. Fill with tap water, run the pump constantly for 1 hour to get rid of nutes, then drain again.
3. Refill with RO water & 150ml of Clearex, run pump back on 1/5 for 24 hours (5.8 ph).
4. Drain again, refill with RO water and 450ml of Sweet (5.8 ph).
5. After 3 days, drain it again and add RO water with 250ml of Sweet (5..

Am I getting everything correctly? I got like 20% Clear, 75% Cloudy and 5% Amber tric's

3124 said:

andyman,

It looks like the software is included in both of the base system packages. Temp and humidity sensors with 2 controlled outlets is just under $1k.

Click to expand...

cool cool, thanks

check outt my thread leave coment men and my bud i lonely

potpimp said:

You can blow several hundred dollars on a carbon scrubber or you can buy about 4 of these little guys and it will take care of the problem - I guarantee it. You will for sure need the AC in Fla. Best of luck on your grow op; it sounds awesome! http://cgi.ebay.com/3-in-1-IONIC-OZONE-AIR-PURIFIER-CLEANER-MACHINE-DEVICE_W0QQitemZ220434312146QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item3352e8abd2&_trksid=p3286.c0.m14&_trkparms=65%3A15|66%3A2|39%3A1|240%3A1318|301%3A0|293%3A7|294%3A50

Click to expand...

After reading this Ozone Generators that are Sold as Air Cleaners | Indoor Air | US EPA I think I'll stick to Carbon.