Harvest a Pound Every Three Weeks!

Shrike

Well-Known Member
Hey, Donk

You, Gringo Loco and of course, SoG, have three of the best modifications done to the basic Stink system that I've seen. I was wondering if ya got it in you to post up directions, measurements and pic's of how you built your system. It's just great seeing how people keep thinking up new ways to modify for their own needs. It doesn't have to be as elaborate as those other two guys, but it would be nice to see your plans...
 

BIGTIMEROOFERR

Well-Known Member
30 min gives time for the post's to stop driping
for the crack at the bottum of your door get a rubber door sweep it sealls it good
line your floor with 8mill plastic and run it 3 or 4 in. up the wall and duck tape it
this helps if you have a flood and co2
trust me on the plastic you will get the floor wet
hope this helps
 

dagobaker

Well-Known Member
i have it on energy saver like my 10000 btu air conditioner
temps stay between 76 and 85 and the humidity depends on what im growing .......
normally its between 45 and 55% humidity
it runs more when lights are on and the co2 generator is kicking..........
its a 50 pint dehud
 

dagobaker

Well-Known Member
i have it under a 7 gallon bucket........but i can use any size i can fit......at least 20 gallon no problem
 

dagobaker

Well-Known Member
I'm using citrus for Cali orange
going to use berry for my blueberry. Maybe half grape. Half berry
how many people flush for a week with just sweet ?
 

Donk

Active Member
Thanks, Donk and Big Time Roofer for answering my question about cleaning the reservoir. Just another quick question (of course haha!). You guys said that you turn your pump off 30 minutes before cleaning. Obviously it doesn't hurt the plants, otherwise you wouldn't be doingg it. What I was wondering was: Why 30 minutes? Could I just turn the pump off and then go right into changing out the bag? Is there any particular reason you all wait 30 minutes before changing out the bag?
I did not mean leave the pump off 30min beforehand . I meant the pump will be off probable for about 30 min while you change your stuff. If you used a trashcan or something you could have everything premixed and PH's before you even drain and take out the old trashbag. Just be careful when draining the res that the trashbag does not get sucked up to the pump when the water gets low.
 

Drio

Well-Known Member
Does anyone know where i can get some sprayers? :S

Srsly ,- they are like really expensive at my hydro store >.<
 

Donk

Active Member
Hey, Donk

You, Gringo Loco and of course, SoG, have three of the best modifications done to the basic Stink system that I've seen. I was wondering if ya got it in you to post up directions, measurements and pic's of how you built your system. It's just great seeing how people keep thinking up new ways to modify for their own needs. It doesn't have to be as elaborate as those other two guys, but it would be nice to see your plans...

I never made any plans. I just thought it out in my head but I will get around to better pics and measurements this weekend plus a couple lil changes I would make for those looking for a smaller footprint.

what page is Gringo Loco and SoG's mods on?


On a sad note I don't think I am gonna get past week 4 with my unit due to my nosey family snooping around my house. Lesson I learned is when rent a house from family don't expect them to give you notice that they wanna come in like when renting from a normal landlord. Since they don't care bout my med card I said I am gonna finish my current C-99 and Blockhead run before I tear it down.
 

doktorgreenthumb420

Well-Known Member
I never made any plans. I just thought it out in my head but I will get around to better pics and measurements this weekend plus a couple lil changes I would make for those looking for a smaller footprint.

what page is Gringo Loco and SoG's mods on?

lol prlly gonna get kicked from site but stinkbud family has gone to www.stinkbuddies.com u will find gringo's plans ther he is a fukin genious right along side the main man stink
 

Shrike

Well-Known Member
Like the Doktor said...you can find Gringo's pdf with all his plans on Stink's site and you can find SoG's stuff here.

Sorry 'bout the family not understanding. Guess there was no way for you to lock up the room? If you signed a lease or rental agreement with them, then they shouldn't come barging in without your permission. You could even have changed the locks to the house itself. If you just have an "understanding", then I guess they can do whatever they want...ahhh, family, ain't they wonderful?:spew:

I never made any plans. I just thought it out in my head but I will get around to better pics and measurements this weekend plus a couple lil changes I would make for those looking for a smaller footprint.

what page is Gringo Loco and SoG's mods on?


On a sad note I don't think I am gonna get past week 4 with my unit due to my nosey family snooping around my house. Lesson I learned is when rent a house from family don't expect them to give you notice that they wanna come in like when renting from a normal landlord. Since they don't care bout my med card I said I am gonna finish my current C-99 and Blockhead run before I tear it down.
 

Donk

Active Member
Like the Doktor said...you can find Gringo's pdf with all his plans on Stink's site and you can find SoG's stuff here.

Sorry 'bout the family not understanding. Guess there was no way for you to lock up the room? If you signed a lease or rental agreement with them, then they shouldn't come barging in without your permission. You could even have changed the locks to the house itself. If you just have an "understanding", then I guess they can do whatever they want...ahhh, family, ain't they wonderful?:spew:
I did not register at 1st thats why I could not find Gringo's. I have everything locked up and they don't have keys but when they want to see inside and will not take no for a answer not much to do unless I want to get notice to move.
 

jobless

Member
Thanks again, Donk and Big Time Roofer for answering my questions. I think I've got it pretty much figured out. Now it's just a matter of finding a job, getting out of my current living situation, finding a new apartment that's suitable for this type of grow and getting started with it. That shouldn't take too long haha!
 
I'm reposting this question here because it's been in the veg section of the SB site for three days with no response.

I remember a couple people (Andyman?) using the 14 gal RN's for veg and thought they worked fine. Planning on using a 14 on the bottom and an 18 on top for root space. Would the 14 be fine for both? Meaning is anyone using a 14 on top and do you have enough space for the roots? Any problems with tangling or removing for flower? Any input would be great, as I already have the two 14's and would need to go out and buy an 18. Thanks.
 

vertise

Well-Known Member
There are to many pages to read so my question may have been answered but i am curious as to how i can go about starting seed growth in a setup like this. I dont have access to clones so seeds are my only choice. what can i use/do to have a successful grow. Thanks
 

Shrike

Well-Known Member
EyesWideOpen,

There have been a lot of posts in the past about using the 14 gal for the veg unit...I believe Stink didn't have much problem saying it was okay to use them. You might just have to keep a good eye on the roots to make sure they don't clog the pump. If you want to see all the posts about this subject or any other...download the pdf that I made for everyone on this thread. It allows you to search all 7,000 posts by searchwords...a big help when you're looking for info that may have been posted months ago...the d/l link is in my sig...hope this helps you.

I'm reposting this question here because it's been in the veg section of the SB site for three days with no response.

I remember a couple people (Andyman?) using the 14 gal RN's for veg and thought they worked fine. Planning on using a 14 on the bottom and an 18 on top for root space. Would the 14 be fine for both? Meaning is anyone using a 14 on top and do you have enough space for the roots? Any problems with tangling or removing for flower? Any input would be great, as I already have the two 14's and would need to go out and buy an 18. Thanks.
 
Thanks Shrike. I downloaded your pdf a few hundred pages ago, and I've updated it when you did. Searched the whole thing with the search feature, that's how I knew it was Andyman using the 14's. All he really said was that he's using them, nothing about problems. Still trying to get some direct feedback. Thanks again.
 

Shrike

Well-Known Member
No problem...hope you can get some more direct answers soon...

Thanks Shrike. I downloaded your pdf a few hundred pages ago, and I've updated it when you did. Searched the whole thing with the search feature, that's how I knew it was Andyman using the 14's. All he really said was that he's using them, nothing about problems. Still trying to get some direct feedback. Thanks again.
 
Top